Ethernet Switch

Auto-adaptation 10mbps and 100mbps, convenient for network updating With distinct ic ip113 hic solution, low-temperature-rise chip, no need of cooling system, realization of flow control, decrease of broadcast storm With famous brand optical-electronic-integration module providing excellent optical and electrical properties to ensure reliable data transmission and long working life¬~speed 10/100m Supporting broadcast filtering, address auto-learning and auto-updating, and store-and-forward operating mechanism Supporting full-duplex flow control or half-duplex back pressure working pattern, along with auto-negotiation Single rj-45 electrical port nic/hub, auto cross-identification, link to computer network cards or switches or hub Supporting the switches to choose between 10/100mbps store-and forward and straight-through transmission pattern(distinct) Supporting 1600byte super data packet transmission Providing indicator lamps for link-loss, electrical and optical link diagnosing, dynamic data transmission and full/half duplex, data rate With more than 50, 000 hours mtbf, complying with telecom operating standard Ultra low power dissipation(< 2.5w, input:ac140 ~ 260v), low heat, long-time stable work Supporting choosing optical ports from dual fiber(mm), dual fiber(sm), single fiber(sm). Normal package

Ethernet switch Complies with ieee802.3 f=ieee 802.3u ieeef=802.3xf=802.1p Store and forward function. Full / half duplex mode Plug and play installation with automatic port configuration 16 10/100m self-negotiable rj-45 ports, 1 uplink port. Auto-shift 10base-t 111and 100base-tx. All ports support ieee802.3x full duplex flow control, and half duplex 111back-pressure flow control Basic board width: 3.2 gbps, supply separate board width for each port to 111realize real bon-blocking transmission 4k mac address Switch led indicator: 1 led (power) Port led indicator: 2 leds (link & 10/100mbps) Power: 100-240vac·+50-60hz Operation temperature: 0 ~ 40 f¦ Store temperature: -20 ~70 f¦ Operation moisture: 10~90% Store moisture: 5~90% Size: 440*177*44 mm

Wj90 - rj45 Communication interface Rj45: rj-45 output network interface Wj90-rj45 general parameters: (typical @ +25 �??, vs to 24vdc) Input type: digital signal input, 8 channels (di0~di7) Low level: input> eight digital inputs, eight digital output industrial ethernet i/o >> supports modbus tcp protocol >> built-in web feature, you can query level state by the web >> switch output state can be set via the web >> no signal isolation between input, output and power supply >> wide power supply range: 8 ~ 32vdc >> high reliability, easy programming, easy application >> standard din35 rail mounting , small size >> users can set the module ip address and other parameters on the page >> web login can be set account and password >> dimensions: 120 x 70 x 43mm

***LNP-0800-T/ 8-Port Industrial PoE+ Unmanaged Ethernet Switch, w/8*10/100Tx (30W/Port); EOT: -40~75C***| Network broadcast storm protection | 8-Port IEEE 802.3at compliant PoE+ Function with 30W/Port | Supports Auto MDI/MDI-X Function | Store-and-Forward Switching Architecture | 2K MAC Address Table | Surge Protection: 2,000 VDC support | ESD Protection: 6,000 VDC support | Redundant Power Input Design – 48~55VDC | Built-in 1 relay output for Port Break Alarm | IP30 Rugged Aluminum Case Design | DIN-Rail and Wall Mount support | Operating Temperature range - STD: -10° to 70° C, EOT: -40° to 75° C | 5-Year Warranty |

Features/special features: Complies with ieee802.3 10base-t, &ieee802.3u 100base-tx standards 8 10/100mbps self-negotiable rj-45 ports; 1 uplink port Absolute separating technology, auto-separate port with troubles All ports support full duplex mode, support ieee802.3x full duplex flow control standard / half duplex back-pressure flow control Built-in 2m memory Support auto-negotiation technology, full/half duplex auto detection Built-in separate buffer to avoid lost of data package Store and forward Separately external dc power ensure stability of equipment Switch led indicator: 1 led (power) Port led indicator: 8 leds Power: dc7.5v/800a Operation temperature: 0 ~ 55 íµ Store temperature: -20 ~70 íµ Operation moisture: 10~90% Store moisture: 5~90% Approval: ulú¼culú¼tuvú¼ce Oem/odm packaging or generic retail packaging

Description: SW16G is applied to IPC camera, Wireless AP, and IP Phone, and easy for network transmission. Features: 16GE, 500M CPU, 52G bus. Comply to IEEE 802.3, IEEE 802.3u, IEEE 802.3ab. Fluid Control: Full-duplex: IEEE 802.3x, Half-duplex: back pressure. Auto MDI/MDIX. Upstream port lightning protection. Store-and-forward. All ports support wire speed switch, jumbo frame transmission. Zero QFD, self-adaption. Panel lights can monitor operative mode and malfunction analysis. Specifications: 1000M Rj45 16 Function Exchange Mechanism Store-and-forward Exchange Capacity 52G MAC 8K Environmental Working Temperature:0?~40? Storage temperature :-40?~70? Working Humidity :10%~90% RH non-condensing Storage Humidity:5%~90% RH non-condensing power AC110-265V 50/60HZ Network protocol IEEE 802.3X IEEE 802.3i 10BASE-T X IEEE 802.3u 100BASE-TX IEEE 802.3ab 1000BASE-T G IEEE 802.3x Flow control IEEE 802.1q VLAN Bridge operation Default Mode Common Switch Match VLAN isolation Speed Ethernet 10Mbps half-duplex, 20Mbps full-duplex Fast Ethernet 100Mbpshalf-duplex, 200Mbps full-duplex Gigabit Ethernet 2000Mbps full-duplex Network Media 10Base-T: Pair 2 Category 3(cat 3) and above UTP/STP(=100m) 100Base-TX: Pair 2 Category 5(cat 5) and above UTP/STP(=100m) 1000Base-T: Pair 4 Category 5 (cat 5e)and above UTP/STP(=100m) Physical Specifications Product Size:440mm*209mm*45 mm(L*W*H) package Size:497mm*373mm*93 mm(L*W*H) 2.7kg

LNK-1400P-SFP Series 10/100Mbps copper to fiber switch provides IEEE 802.3af/at Power Sourcing Ethernet (PSE) functionality on the 4 twisted pair ports, supplying both data and electric current to devices such as WiFi access points, VoIP phones and IP security cameras. It is an ideal solution when PoE-powered network devices need to be installed further than the 100 m / 300 ft. LNK-1400P-SFP supports 100M Ethernet Port and 100M SFP Port. The Ethernet port supports both half-duplex and full-duplex mode. Users can use different type of SFP modules (single-mode/multi-mode fiber, 1/2 core) as needed. Standard Packaging: Carton packaging(Support customer Logo)

Opticombine Industrial Ethernet Switch, 1 x 10/100/1000M Base A network switch is networking hardware that connects devices on a computer network by using packet switching to receive and forward data to the destination device. Feature 1. High quality optoelectronic modules provide good optical and electrical characteristics. 2. Ensures reliable data transmission and long working life. 3. Supports full duplex or half duplex mode with automatic negotiation capability. 4. Automatic cross recognition of network port support. 5. In line with carrier level operation standard, the average fault free operation is more than 50 thousand hours. 6. Working power supply: DC 10-52V provides anti connection protection. 7. Uses SC optical fiber interface (optional ST, FC, SFP interface) 8. Lightning surge protection (power):5000A (8/20 s)

POE1602SFP-3 is applied to POE IPC camera, POE WIFI AP, and POE IPPHONE, and easy for network transmission. This device comes with SFP port, easy for optical fiber remote transmission. Main Features 16GE POE+2SFP, with different modules, can up to 100KM. Comply to IEEE 802.3?IEEE 802.3u?IEEE 802.3ab?802.3X?802.3z. 500M CPU, 52G bus Comply to POE IEEE 802.3af/at standard, all ports standard testing. Support POE IPC camera, POE WIFI AP, and POE IPPHONE. Fluid Control: Full-duplex: IEEE 802.3x, Half-duplex: back pressure. Auto MDI/MDIX. Upstream port lightning protection. MAX 30W, MAX power 300W. Store-and-forward. All ports support wire speed switch, jumbo frame transmission. Zero QFD, self-adaption. Panel lights can monitor operative mode and malfunction analysis. Specifications: Electric Port 1000M POE 16 SFP 2 Function Exchange Mechanism Store-and-forward Exchange Capacity 52G MAC 8K POE IEEE802.3af/at, MAX 30W, MAX power 300W power AC110-265V 50/60HZ 2.5A Network protocol IEEE 802.3X IEEE 802.3i 10BASE-T X IEEE 802.3u 100BASE-TX IEEE 802.3ab 1000BASE-T G IEEE 802.3z 1000BASE-X G IEEE 802.3af /IEEE 802.3at IEEE 802.3x Flow control IEEE 802.1q VLAN Bridge operation Default Mode Common switch Match VLAN isolation Speed Ethernet 10Mbps half-duplex, 20Mbps full-duplex Fast Ethernet 100Mbpshalf-duplex, 200Mbps full-duplex Gigabit Ethernet 2000Mbps full-duplex Network Media 10Base-T: Pair 2 Category 3(Cat3) and above UTP/STP(=100m) 100Base-TX: Pair 2 Category 5(Cat5) and above UTP/STP(=100m) 1000Base-T: Pair 4 Category 5(Cat5e) and above UTP/STP(=100m) 1000Base-SX:62.5µm/50µm MMF(2m~550m) 1000Base-LX:62.5µm/50µm MM(2m~550m) or 10µm SMF(2m~5000m) Physical Specifications Product Size:440mm*290mm*45mm(L*W*H) package Size:497mm*393mm*97mm(L*W*H) 4.4Kg