NF801 is the new generation of digital relay tester. This digital relay tester is equipped with 8 optical ports, and its powerful data processing capability can achieve the full functional test of the IEC61850 devices. Support GPS\ IRIG-B\ IEEE 1588 synchronization, it makes the substation internal debugging and substation to substation combine debugging available. NF801 integrated some unique functions including: the abnormal SV\GOOSE simulation, virtual terminal test, the optical power testing and so on.
Features
8 fiber optical ports for:Receiving and sending IEC61850-9-2 format SV and GOOSE message;Receiving and sending IEE1588 message;Measuring received fiber optical power
Provide flexibility to configure both SV (IEC61850-9-2) and GOOSE ports independently.
Each port can be configured as Receive and Send at the same time or it can be configured as Receive or Send.
Can check the GOOSE communication link
SV, GOOSE configure message can be saved and recall repeatedly
With the IEEE1588 synchronization function, deviation of the time is less than ±80ns
With GPS, IRIG-B code synchronization interface
NF801 is the new generation of digital relay tester. This digital relay tester is equipped with 8 optical ports, and its powerful data processing capability can achieve the full functional test of the IEC61850 devices. Support GPS\ IRIG-B\ IEEE 1588 synchronization, it makes the substation internal debugging and substation to substation combine debugging available. NF801 integrated some unique functions including: the abnormal SV\GOOSE simulation, virtual terminal test, the optical power testing and so on. Features 8 fiber optical ports for:Receiving and sending IEC61850-9-2 format SV and GOOSE message;Receiving and sending IEE1588 message;Measuring received fiber optical power Provide flexibility to configure both SV (IEC61850-9-2) and GOOSE ports independently. Each port can be configured as Receive and Send at the same time or it can be configured as Receive or Send. Can check the GOOSE communication link SV, GOOSE configure message can be saved and recall repeatedly With the IEEE1588 synchronization function, deviation of the time is less than ±80ns With GPS, IRIG-B code synchronization interface
NF802 is the new generation of digital relay test equipment with local control. This digital relay tester is equipped with 8 optical ports, and its powerful data processing capability can achieve the full functional test of the IEC61850 devices. Support GPS\ IRIG-B\ IEEE 1588 synchronization, it makes the substation internal debugging and substation to substation combine debugging available. NF802 integrated some unique functions including: the abnormal SVGOOSE simulation, virtual terminal test, the optical power testing and so on Features 8 fiber optical ports for:Receiving and sending IEC61850-9-2 format SV and GOOSE message;Receiving and sending IEE1588 message;Measuring received fiber optical power Provide flexibility to configure both SV (IEC61850-9-2) and GOOSE ports independently. Local control with quick control buttons Each port can be configured as Receive and Send at the same time or it can be configured as Receive or Send. Can check the GOOSE communication link SV, GOOSE configure message can be saved and recall repeatedly With the IEEE1588 synchronization function, deviation of the time is less than ±80ns With GPS, IRIG-B code synchronization interface.
PNS630 portable analyzer was designed for smart substation maintenance. IEC61850-8-1(Goose),IEC61850-92, IEC60044-7/8 msssage can be monitored and analyzed, digital relay test function also equipped. SMV GOOSE message numerical and status analysis were realized and dispalyed visually by its numerical analyzing function. Features 1) Support IEC 61850-9-2, IEC 60044-7/8 (FT3), GOOSE, IRIG-B and IEEE1588 standards. 2) Support SCD, ICD, CID files analysis to get sampling value, sampling channel and GOOSE signal configuration. 3) Support SCD displayed in graphics. 4) Support SMV ang GOOSE monitor, and record the abnormal messages. 5) Support IEC60044-7/8 (FT3) receving and sending. The baud rates 2.5Mbps, 5Mbps, 10Mbps is available. 6) Support IEC 61850-9-2/9-2LE receiving and sending. ASDU 1-8 is available. 7) Support message monitor and record (PCAP format) for analysis. 8) Support network load analysis. 9) Support phase check. 10) Support IRIG-B and IEEE 1588 synchronization to provide time synchronization and clock source. 11) Simulate MU to output IEC61850-9-2, IEC 60044-7/8 to test digital relays. 12) Support IED time delay and SOE test. 13) Support MU time delay test, synchronization and time test. 14) Support to output messages in different flow. 15) Support SMV in different status in maximum 10. 16) Support DC testing to test digital voltage, CT and PT�??s polarity. 17) Support dBm test within -31dbm~-14dbm at wavelength 1310nm. 18) Large LCD screen to operate. 19) Chargeable battery for continuous working 6 hours above.
GF312V2 portable three phase multifunction watt-hour meter calibrator on-site is the newest product produced by our company by widely visiting users and referring to the advantages of the same kind of products home and abroad. The measured part of the product adopts high speed A/D transmission to send DSP to conduct digital processing, which largely improves measured degree of accuracy and stability. Central processing part adopts 32-bit ARM embedded technology to make instrument interface novel, function abundant, operation distinct and easy, and performance steady. Class of accuracy: Class 0.02, 0.05 or 0.1, range from 12A/600V or 120A/600V, with comfort design, small size and light weight. The model GF312V2 watt-hour meter calibrator is suit for electric power departments, measuring and quality examining departments and electric lab to field use.
The GF302D1 three phase portable energy meter test equipment consists of an integrated three phase current source(up to 500V/120A or 500V/20A) and built-in three-phase electronic reference standard of accuracy class 0.05%. Characteristic features of the GF302D1 are its wide measuring range, high accuracy and high tolerance to unwanted external influences. The equipment offers high functionality combined with an excellent menu guided operation via built-in keyboards and colored 7" touch LCD-display. Voltage & current harmonics output from 2 to 63 times. This model portable meter test equipment can be programmable by PC, automatic generation of energy meter error test report.
Supplier: Energy meter test equipment, ct pt analyzer, relay tester, three phase standard power source, reference energy meter, electrical calibrator, power quality analyzer, power transformer test equipment, circuit breaker tester, high voltage ammeter recorder, high voltage test set, ev & recharging testing equipment, substation iec61850 test software, intelligent digital power meter and transducer, current probe & current sensor, split core ct, instrument current transformer & voltage transformer, micro ct & pt, energy meter relay parts, and handheld terminal
Buyer: Energy meter test instrument
Supplier: Generator set, intelligent test system
Supplier: Sensor of electric power, temperature, humidity as well as the intelligence test control meters
Wgqh series of high voltage solid soft starter Performance characteristics The device combines series & parallel thyristor, professional insulating material imported with original packing and modern power & electric control technology, which is applicable to large and medium high voltage soft starting equipments with motor.