Thermostat
Operation
The differential expansion of the sensing element causes the opening of a snap-action switch in the thermostat head. In case of abnormal temperature rise, a bimetal disc ensures double pole safety. The limiter is manually re-settable.
Technical characteristics
Type Single pole stem control with single pole bimetal safety limiter
Temperature Range0 to 160°C
SAFETY LIMITER TEMPERATUREFixed 70 to 120°C
Rating15a – 400V / 20A – 250V
MATERIALBrass, invar, bimetal
Stem Lengthup to 450 mm
Connections Brass faston or screw terminals
Approvals CE conformity, ENEC mark according to EN 60730-1, EN 60730-2-9, ROHS conformity
Independent non self resetting safety function
Over temperature cut out
Available with single pole limiter or as control only
Factory pre-set fixed temperature limiter
End-user adjustable control temperature
Supplier: Solar panels, battery, inverter, room thermostats, greenhouse thermostats, solar powered ev charging stations, mounting systems
Supplier: HVAC thermostat for fan coil, single, multi-stages and heating system, motorized valves and solar thermal system
Material: Al 1060 panel + Al&Cu connection tube Double inflated Black painting edge bending with holes We can make it according to your requirement or drawing!
Supplier: Hvac thermostat / digital temperature controller , air conditioning unit, fcu, dx a/c, individual control system, main controller, sub controller, centralized control system, ir remote control system
Supplier: Tractor parts: hub front wheel, hub idler gear, clutch release bearing, body water pump housing thermostat, delivery head, exhaust manifold, elbow vertical., grey iron products, casted products.
Services: Provide foundry and machining services.
Buyer: Pig iron, foundry coke
HEATING Elements Various ratings Thermostat control attached Made in Europe Technical characteristics Type Three phase with various power rating Temperature RANGE0 to 100°C CONTROLAttached The Technical characteristics TYPEThree phase with various power rating Temperature RANGE0 to 100°C Control Attached Thermostat Rating7.5KW/10KW/12KW/15KW Rating7.5KW/10KW/12KW/15KW
Product Introduction Wood briquette machine is the main production equipment charcoal molding equipment, mainly wood chips, sawdust, rice husk, peanut shells, plant stalks and other carbonaceous wood materials, without any binder, after high temperature, high pressure process , Extruded into a solid rod with a central hole. Rod machine with automatic thermostat device, at a set temperature performance and stability, and has a reasonable structure, small size, small footprint, labor-saving, energy saving and easy operation and maintenance advantages. The solid bar produced by the machine is more flammable and has higher heat (more than 20% higher than that of common wood) after carbonization. It has small pollution when burned and is easy to store and transport in large proportion. It can make full use of crops and forest waste, Waste as treasure.  Raw material The source of raw materials is rich, almost any biomass material can be briquetted. Working principle Using the intrinsic attributes of the wood material, by spiral extruding under high temperature and pressure, wood element in wood material becomes plastic and makes the fine fiber combine, and at last stick solid plank fuel is formed. Main parts 1. Forming of tube, special casting steel, inner barrel boron treatment,continuously use for more than 5 months. 2. Heating ring: the material is stainless steel; on the molding tube for heating, so that the raw materials in the shape of conducive to shrinkage, easy to shape. 3. Propeller,advanced design,high speed of producing rod ,high density,high resistance to wear,one welding time can work continuously for more than 30 hours. Advantage 1. Increase the pitch to increase the amount of feed, a substantial increase in output. 2. With electric heating temperature control system to ensure the formation of stable discharge, improve work efficiency. 3. Optimization of the structure of the tube, reducing the friction between the mechanical and raw materials, an increase of the density of the stick. 4. Product bar shape and size of the selective, to meet different customer requirements.
