1.The shearing unit use sharp shearing,the incision interface is flat,no droop,burrs and waste.
2.The punching unit use an united six mode turnplate tooth shape to make sure the upper mode and the lower mode are absolutely in the center.Improve the mould concentricity and longer the working life.The turnplate is in tooth shape with good view and high strength.No need to frequently change molds,labor intensity is highly reduced,it is easy and quick to ues.Producing efficiency is boviously higher than a traditional one.
3.The bending unit uses a double decker working table,which can make sure the three working positions can do their operations at the same time without bothering the others.By changing different mould it can do horizontal bending and vertical bending.CNC controls the bending angle by an imported PLC contact system.Input a busbar thickness and an angle on a CNC touching screen,or input a height and a side length to get the result what you need,such as Z bending.Bending precision is ±1,repeat precision is ±0.,the user can input processing date in advance,and the system will do the process according to inputted date.The field date can be put into the system at any time and be paged out for using repeatedly.
4.The machine with four casters,so it is easily to be moved to the place where you want.There are two operating modes,manual button and foot switch button,which is easily for workers to operate and use.Based on users requirement,it can do all kinds of special shape processing with different molds or equipping parts.
Description: busbar testing machine Function: busbar high voltage withstanding, busbar isolator testing. Busbar machine for busbar production. such like assembly, riveting, packing.
Supplier: Couplings, gearbox, valves, pumps, bearings, conveyor systems, pipes & fittings, automation drives electrical items, rtd, cables, switchgears, transformers, measuring instruments, drilling machines.
ball valves, gate valves, globe valves, butterfly valves, diaphragm valves, waffle valves, sluice valves, hydraulic valves, pneumatic valves, solenoid valves, bellow seal valves, check valves in stainless steel, ss 304, ss 316, brass, m.s, cast iron, cast steel, pvc, nylon, teflon, ceramic lining valves.
fittings: flanges, elbows, tee, couplers, nipples.
bearings, v belts, couplings: gear couplings, pin bush couplings,pulleys
Services: Export, clearance, door delivery, import, automations, maintenance, retro fitting, installations
CNC Busbar Processing Machine Product description This series CNC busbar processing machine has three units: punching, shearing and bending. It is easily to adjust each unit to shorten the processing time and improve the production efficiency. The bending unit uses the imported PLC control system, which have stable system and high precision. It is used to processes copper and aluminum busbars in different specification. By relative operation unit if can easily and quickly do all kinds of processing to copper and aluminum busbar, such as shearing , punching(circular hole and oblong hole), flat/honrizental bending, vertical bending and knurling. Change different mold to do special processing to copper bar, such as flat press, embossing, cable connector process, and can do cutting, flat crushing, pushing, and bending. Main characteristics *The shearing unit uses sharp shearing, the incision interface is flat, no droop and burrs and waste, beautiful shape. *The punching unit uses an united six-mode template in tooth shape to make sure the upper mold and the lower mold are absolutely in the center, improve the mold concentricity and longten the working life. *The turnplate is in tooth shape with good view and high strength. No need to frequently change molds, labor intensity is highly reduced. It is easy and quick to use. *Producing efficiency is obviously higher than a traditional one. *The bending unit uses an single-decker working tab le, which can make sure that three working positions can do their operations at same time without bothering the others. Technical parameters äº?ã??Portable Busbar Processing Machinery(Combined Busbar Processing Machinery) Product description Based on the most advanced foreign products and Chinses reality, it is designed to improve working efficiency and save some time, it is for PTD (Power transmission and distribution) and workshop field operation and electric equipment manufacturing, such as power distribution cabinet and switch cabinet. The machine has some functions, such as shearing, Punching , honrizental punching, etc. Technical parameters
NC.40Z-2000 CNC busbar bending machine 1.The series of machine uses oil pressure as the active force,CNC as control unit, matching our independent researched and developmented CAD/CAM system, with the charactors of high efficiency and high automation. 2.Adopting the "open type bending" structure,structure simple, stress reasonable,easy to charge and discharge materials ect. 3.Hydraulic busbar bending machine part with the "two speed feed"when improving the efficiency of the processing,making the accuracy of the bending ensured. 4. Through the "pull type rotary encoder" test cylinder position to finish the processing operation. 5.The gauge adopts modularization design.,can choose the length of the gauge according to demand.The bridge structure of the "double linear guide" is used in the gauge section.Running smoothly. 6.HMI,Operating easily,real-time present operating state of the program. 7.Can connect wi th MX602K-7C CNC busbar punching machine cutting machine by CNC programming software,operating simply,machine and software not influence each other,easy to maintain. 8.Hydraulic hose adopts national standard A connection mode,easy to connect,firm and durable. -
hydraulic CNC busbar bending machine. To cut/punch(all kingds of round/square/special holes and slot type)/chamfer/horizontal bending/ vertical bending/ emboss/Press cable thread /twist/anti-press busbar bending cutting punching machine flat the copper/aluminum busbar ect. Function Introduction: 1. Cutting unit adopts double-column shear structure (patent number: ZL201120262802.1),Cut mouth flat, no burr, no waste. 2. Punching unit adopts Nodular cast iron,4/6/8 modes position turrent punching structure which is a totaly whole one,improving concentric degree of moulds, prolonging the service life of the moulds,saving time of change. 3. Bending unit adopts closed bending structure,making it is more uniform when processing horizontal bending and embossing. Also prolonging the service life. 4. Bending unit adopts double work table,achieved a real sense of the three position working at thge same time while working without impact each other. 5. Adopting PLC controled, bending angle can be cnc,and with a storage function. 6. Three units of the machine can work at the same time,not affecting each other,Improving the processing efficiency. 7. Hydraulic busbar bending cutting punching machine tank with thick plate welding,and is treated by phosphating, making hydraulic oil can be long time used and will not degenerate.
MX602K-7C CNC copper busbar punching shearing machine To cut/punch(all kingds of round/square/special holes and slot type)/chamfer/emboss the copper/ aluminum busbar ect. Function Introduction: 1. This machine belongs to the special processing equipment of electrical power industry, high and low voltage complete sets, bus bar way and so on. 2. With the characteristics of high efficiency, low energy consumption, labor saving, time saving, high processing precision, convenient operation, beautiful and novel appearance (patent number: ZL 201430448531.8). 3. The cnc busbar punching machine equipment has a unique processing principle and processing method,Hydraulic cylinder moving device is design patent (patent number: 201320804568.X ZL),Daily processing capacity is in the number of tons or more.It is the preferred equipment for busbar processing line. 4. Mould base can choose 5 punching+1cutting+1embossing or 7punching+1cutting this two kinds of straight column type mould base. 5. Cutting dies is a single pole type hedge Scissor (Patent No.: ZL 201300804566) no waste after shearing. 6. The whole hydraulic busbar bending cutting punching machine is composed of feeding platform, mould base, feeding device and servo control unit and BMC busbar processing assistant design system(certificate number: 846802nd)Real-time showing operating state of the program. 7. Mould frame adopts nodular cast iron material,good abrasion resistance, ensuring the concentric of the he upper and lower dies When long-term use when processing.
We supply Anti Vibration Machine Pads, Round Levelling Mounts, Precision Wedge Mounts, Base Mounts and special tailor made mounts for special applications as per sample or drawings Our Products are manufactured using materials such as Nitrile Rubber, Cork articles, Chemicals, and High Grade Castings & Fasteners. Our product range covers a wide range of applications from Forging Hammer to Air Compressor.
It belongs to Al-Mg-Si Alloy, which is widely used, especially in the construction industry. It is the most promising alloy. Good corrosion resistance, excellent weldability, good cold workability, and medium strength. 1. the application of plate belt is widely used in decoration, packaging, construction, transportation, electronics, aviation, aerospace, weapons and other industries. 2. Aeronautical and aerospace aluminum is used in the manufacture of aircraft skin, fuselage frame, girders, rotors, propellers, fuel tanks, siding and landing gear struts, as well as rocket forging rings, spacecraft siding, etc. 3. Aluminium for transportation is used for car body structural parts of cars, subway cars, railway buses and high-speed buses, car doors and Windows, shelves, car engine parts, air conditioners, radiators, car body plates, wheels and ships. 4.All aluminum can can making material is mainly in the form of thin plates and foil as metal packaging materials, made into cans, caps, bottles, barrels, packaging foil. Widely used in beverage, food, cosmetics, drugs, cigarettes, industrial products packaging. 5, printing aluminum is mainly used for making PS plate, aluminum based PS plate is a new type of material in the printing industry, used for automatic platemaking and printing. 6.Aluminum alloy for building decoration because of its good corrosion resistance, enough strength, excellent process performance and welding performance, is widely used in building frame, doors and Windows, ceiling, decorative surface, etc. Such as all kinds of building doors and Windows, curtain wall with aluminum profiles, aluminum curtain wall panels, pressure plate, decorative plate, color coating aluminum plate, etc. 7. Aluminum for electronic home appliances is mainly used in various busbars, wires, conductors, electrical components, refrigerators, air conditioners, cables and other fields. Specifications: round bar, square bar Representative applications include aerospace fixtures, electrical fixtures, communication fields, but also widely used in automated mechanical parts, precision machining, mold manufacturing, electronics and precision instruments, SMT, PC board solder carrier and so on. Al: Allowance Si Si: 0.20 ~ 0.6 Copper Cu: 0.10 or less Magnesium Mg: 0.45 ~ 0.9 Zinc and zinc: 0.10 or less Manganese Mn: 0.10 or less Ti Ti: 0.10 or less Chromium Cr: 0.10 or less Iron Fe: 0.000 ~ 0.350 Note: Single :â?¤0.05; Total: 0.15 or less
It belongs to Al-Mg-Si Alloy, which is widely used, especially in the construction industry. It is the most promising alloy. Good corrosion resistance, excellent weldability, good cold workability, and medium strength. 1. the application of plate belt is widely used in decoration, packaging, construction, transportation, electronics, aviation, aerospace, weapons and other industries. 2. Aeronautical and aerospace aluminum is used in the manufacture of aircraft skin, fuselage frame, girders, rotors, propellers, fuel tanks, siding and landing gear struts, as well as rocket forging rings, spacecraft siding, etc. 3. Aluminium for transportation is used for car body structural parts of cars, subway cars, railway buses and high-speed buses, car doors and Windows, shelves, car engine parts, air conditioners, radiators, car body plates, wheels and ships. 4.All aluminum can can making material is mainly in the form of thin plates and foil as metal packaging materials, made into cans, caps, bottles, barrels, packaging foil. Widely used in beverage, food, cosmetics, drugs, cigarettes, industrial products packaging. 5, printing aluminum is mainly used for making PS plate, aluminum based PS plate is a new type of material in the printing industry, used for automatic platemaking and printing. 6.Aluminum alloy for building decoration because of its good corrosion resistance, enough strength, excellent process performance and welding performance, is widely used in building frame, doors and Windows, ceiling, decorative surface, etc. Such as all kinds of building doors and Windows, curtain wall with aluminum profiles, aluminum curtain wall panels, pressure plate, decorative plate, color coating aluminum plate, etc. 7. Aluminum for electronic home appliances is mainly used in various busbars, wires, conductors, electrical components, refrigerators, air conditioners, cables and other fields. Specifications: round bar, square bar Representative applications include aerospace fixtures, electrical fixtures, communication fields, but also widely used in automated mechanical parts, precision machining, mold manufacturing, electronics and precision instruments, SMT, PC board solder carrier and so on. Al: Allowance Si Si: 0.20 ~ 0.6 Copper Cu: 0.10 or less Magnesium Mg: 0.45 ~ 0.9 Zinc and zinc: 0.10 or less Manganese Mn: 0.10 or less Ti Ti: 0.10 or less Chromium Cr: 0.10 or less Iron Fe: 0.000 ~ 0.350 Note: Single :â?¤0.05; Total: 0.15 or less