Djx Graphite Rods China Manufacturer

Graphite Round Stick for Gold Silver Casting There are two types of graphite rod, blank material (unmachined graphite rod) and finished product (machined graphite rod). Graphite rods are often used as electric heating elements in high-temperature vacuum furnaces. The maximum operating temperature can reach 3000�?�°C. It is easy to oxidize at high temperatures, it can only be used in neutral or reducing atmospheres and vacuum furnace. Its thermal expansion coefficient is small, thermal conductivity is large, resistivity is (8~13) 10-6 m, easier to process than SiC, MoSi2 rod, high temperature resistance, extreme cold and extreme heat resistance, good price Cheaper.

Product description: Copper coated graphite powder is a kind of new material produced by our factory, its specific gravity is higher than graphite and lower than copper, it overcomes the disadvantages of the mechanical mixing powder in the old technology, such as difficult to mix evenly and easy to form segregation due to big density difference ( copper 8.8ã103kg/m3, graphite 2.2ã103kg/m3) and bad dispersibility of graphite powder. At the same time, carbon and copper interface can only be connected by mechanical interlock, the bonding strength between the interfaces is low, which causes unstable product quality. For graphite and copper of high temperature infiltration, even when the temperature is up to 1100â the wetting angle is 140 it is very difficult for graphite to form evenly suspending distribution state in copper solution, and easy to have segregation. The copper coated graphite powder produced by our company is to make the graphite surface to be coated with one layer of continuous copper first, so the graphite distribute evenly between the copper. It is easy for copper to form three-dimensional grid structure, the interface bonding strength is high, which improves the product quality, it can be widely used as adding material in the production of motor brush, self-lubricating bearing, spray, liquid metallurgy material and so on. Copper content:25-95 Fineness:200-800 mesh

Production high quality petroleum coke. Extruded, baked, impregnated and graphitized under precise technical control. Applications Electrodes, anodes, cathodes, heating elements, resistors, fluxing/degassing tubes, molds, crucibles, special structural parts, etc. in metallurgy, mechanical engineering, chemical & electrochemical industry, energy management, glass & ceramics, transportation and other industries. Programmable properties Medium grain High density and high mechanical strength High thermal and chemical resistance High resistance to thermal shock Proper electrical conductivity Minimum wettability to molten metals and glass Sizeï¼? Diameter (mm) 75,100,120,150,175,200,250,300 Length (mm) 550 2200 Other diameters and lengths are available on request.

Production high quality petroleum coke. Extruded, baked, impregnated and graphitized under precise technical control. Applications Electrodes, anodes, cathodes, heating elements, resistors, fluxing/degassing tubes, molds, crucibles, special structural parts, etc. in metallurgy, mechanical engineering, chemical & electrochemical industry, energy management, glass & ceramics, transportation and other industries. Programmable properties Medium grain High density and high mechanical strength High thermal and chemical resistance High resistance to thermal shock Proper electrical conductivity Minimum wettability to molten metals and glass Size: Diameter (mm) 75,100,120,150,175,200,250,300 Length (mm) 550 2200 Other diameters and lengths are available on request.

Production high-quality petroleum coke. Extruded, baked, impregnated and graphitized under precise technical control. Applications Electrodes, anodes, cathodes, heating elements, resistors, fluxing/degassing tubes, molds, crucibles, special structural parts, etc. in metallurgy, mechanical engineering, chemical & electrochemical industry, energy management, glass & ceramics, transportation and other industries. Programmable properties Medium grain High density and high mechanical strength High thermal and chemical resistance High resistance to thermal shock Proper electrical conductivity Minimum wettability to molten metals and glass Size Diameter (mm) 75,100,120,150,175,200,250,300 Length (mm) 550 2200 Other diameters and lengths are available on request.

Ilities, and highly qualified technicians with years of machining experience to produce consistent graphite products to meet current market demands. Xrd graphite is committed to supply high quality graphite products and excellent service by treating each customer individually. The company has built an efficient cad/ cam team to develop the best method to meet all the different requirements from our customers. Machining services We provide milling, band sawing¡ê¬planning, slicing, drilling, polishing and cnc machining services. Paper packaging

Shandong Sungraf Carbons Co., Ltd was founded in 2008, the company has more than 10 years of production and export experience. Our company own a number of special technologies such as the production of outstanding conductivity and high purity expandable graphite. The company strictly implements the ISO9001 quality management system, strengthens production process control, improves quality management methods, has standard laboratories to ensure product verification, and fully meets the needs of domestic and international markets. Please let me know if you are interested in graphite, I will send you our company catalog. Im sure the products of our factory will satisfy you.

STANDARD GRADE: HP GRADE STANDARD SIZES: DIAMETER X LENGTH (MM): D38.1 X 635, D200X1600, D250X1800. The Grades And Sizes Can Be Different According To Users Requests.

Name: Micronized Graphite Specifications: Fixed carbon:80%-99.9% Particle Size: 1μm-38μm Advantages: Excellent property of crystalline flake graphite, unusual oxidation resistance, self-lubricity, mouldability and adhesivity, superior electric and thermal conductivity. Usage: As mould release lubricant in the production of catalyst of in chemical fertilizer industry. As basis material of high-temperature or corrosive resistant lubricants. As mould release agent in powder metallurgy or raw material in metal alloy. As packings or catalysts of rubber, plastics and varieties of composite materials