Sbs/app Modified Bitumen Waterproof Membrane

The products are made by soaking the base in bituminous or thermo plasticity elastomeror thermoplastics modified bitumenous, then covering double faces with elastomer(SBS)or thermoplastics(APP,APAO,APL)modified bitumenous, and last finishing the upward face with fine sands, mineral slates(or grains)or polythene membrane while downward face with fine sands or polythene membrane. 100mm*10m

The products are made by soaking the base in bituminous or thermo plasticity elastomer(such an styrene butadiene styrenef¼SBS),or thermoplastics(such as atactic Polypropylene---APP,APAO,APL)modified bitumenous, then covering double faces with elastomer(SBS)or thermoplastics(APP,APAO,APL)modified bitumenous, and last finishing the upward face with fine sands, mineral slates(or grains)or polythene membrane while downward face with fine sands or polythene membrane.
good self heating, easy application, and long service, etc.

Specification
thickness:2mm 3mm 4mm 5mm
width:1m
length:7.5m,10m,15m
Certificate
CE,ASTM standard, ISO
Pakaging
7.5sqm or 10sqm per roll plastic sack by rolls or pallet

SBS Elastomer modified bitumen membrane is SBS thermoplastic elastomer modified asphalt roofing, high-quality polyester felt, glass fiber mat, glass reinforced polyester mat for the child based, sand, mineral therapy, PE film, aluminum as cladding material, the use of special mechanical mixing and grinding of the elastomer modified bitumen membrane.

Plastic modified bitumen waterproofing membrane APA0 or APP0, AP0 to modified asphalt roofing, high-quality polyester felt, glass fiber mat for the child based, sand, mineral grains chat, PE coverage of membrane materials, use of advanced technology refined plastic modified bitumen membrane.

BRAND:XINLEI

SPECIFICATIONS:

1.Width:1m or as customized

2.Length:from 5-20Meters as customeized

3.Thickness:2/3/4/5mm

4.Face:PE film,colorful sand,mineral granules and Aluminium Foil anti-sunshine and

anti-ageing

The sbs modified bitumen waterproof membrane is in polymer modified bitumen for coating,long fiber polyester fiber felt for tire body,metal foil,fine for finish,polyethylene film for isolation layer of a kind of soft waterproof material.Mainly used for high speed railway bridge deck waterproof,this product has good performance, and waterproof construction simple characteristics.
Features:
1) APP/SBS modified bitumen waterproof membrane:
a) Conforms to the national standards
b) SBS modified bitumen waterproof membrane is specially used as waterproof material in cold area
c) APP is specially suitable for areas of high temperature and of strong sun-shine
Item
APP/SBS modified bitumen waterproof membrane
Brand
Xinlei Waterproof
Grade FirstSecond
Base PY G
Cover PE S M Al
Thickness/3/4mm
Color Black
PE film(or other colors)
Yellow/green/other
Fine Sand
Grey/Green/other
MineralGrains/Flakes
Aluminum
Foil
Notes
PY------Polyester Base
G-------Glassfibre Base

Advantages of SBS Self Adhesive Waterproofing Membrane

1) Unique self-healing function

2) Strongcohesion with base surface

3) Superiorbond strength between membrane and membrane

4) Excellentelongation that can adapt base surfacedeformation and cracking

5) Simple in construction
Application of SBS Self Adhesive Waterproofing Membrane

1. Building roof (Non-outer appearances)

2. Basements, tunnels, pools and other water projects

3. Non-exposed roofing projects that can not use fire to performance

Polythene polymer Compound Waterproof Membrane

High polymer polyethylene polypropylene compound waterproof membrane is made from non-woven fabrics,polypropylene and high grade Polyethylene raw material, is a kind of compound type waterproof material with 4 layer flaky materials of enhanced protective layer, ageing resistance layer, waterproofing layer and tackifying and enhanced layer by adding additives .
High polymer polyethylene polypropylene compound waterproof membrane is made by multiple-ply different materials, so its performance has been enhanced significantly, especially its aging and weather resistance layer enables the membrane possess more longer service life with up to 50 years.
Both the upper and lower surfaces of it is rough, and non-woven fibers were irregular cross-structure to form three-dimensional mesh so that it has high tensile strength, permeability and good low temperature flexibility, small swelling and friction coefficient and low temperature effect, with strong deformation adaptability, which can be used in conjunction with a variety of adhesives and has a good bonding effect.
High polymer polyethylene polypropylene compound waterproof membrane is a series of polyethylene resin for waterproofing membrane, and it is a non-toxic, pollution-free green product

Fields of application:
The series-XM115-150 multilayered polymer polyethylene fiber waterproofing membrane is suitable for various industrial , civil building roofing , underground waterproofing, and metallurgy , chemical industry , water conservancy, environmental protection , mining and other seepage control projects.

Wet laid method: Base plane treatment ? Scraping coat and preparation polymer cement slurry (sand) ? Node details treatment (attached layer) ? Laid waterproof membrane ? half header treatment ? The waterproof layer inspection ? protective layer's construction

TJ 441 Self-Adhered Polymer Modified Bitumen Waterproof Membrane is based on SBS elastmoeric modified waterproof membrane,laminating with a special PET film,which can be categorized into two types--N and PY. N has PE(Polyethylene),PET,and D(Non-PET film
with adhesion in double side);PY has PE,S(sand),AL(Aluminum Foil),D;Its characteristics lie in suitable for wet substrate,no need to find flat substrate and painted surface disposal,free torch heat,integrating with the mortar or concrete perfectly. It's safe and environmental protection.
Features:
Supreme adhesion integrates with the substrate forever with special patent formula
Suitable for various substrates enables to lower resource waste massively and save the cost and time
Unique operation craft of wet treatment,free from primer,no need of heat melt
Size Available
Width-3.28ftï¼?1m
Length-32.8ft(10m) 49.2ft(15m)65.6ft(20m)
Thickness-
N(1.2mm,1.5mm,2mm)
G (2mm,3mm,4mm)
Packaging,storage and shipping
Product is packed into rolls with plastic woven bag
Avoid sunlight and rain,store it under current and dry. The temperature should lower than 50 ,putting it upright and keep the story less than 2


TJ-789 TPO Waterproof Membrane
TPO Waterproof Membrane takes TPO elastomer as base material,adding fire retardant filling,anti weathering pigment filling,anti oxidization agent and light stabilizer,through high speed mix,melting extrusion,and calendering into waterproofing sheet material. Firstly developed in the early 20 centuries,it is extensively used for rooftop waterproofing projects under the installation of mechanical fasteners. With the combination of the great anti-weathering of EPDM and the weldability of PVC sheet,it defines the leading position in waterproofing industry
TPO waterproof membrane has 0% plasticizer and no chloride,generating zero harmful gas when welding
Application: Extensively used for the waterproof projects of industrial and residential buildings and public constructions

Installation Guide
1. Substrate Requirements: Clean,no bugle and pointy object
2.Installation Steps(Mechanical Fastener)
Substrate Clean Pave PE film Pave Insulation board Pre-applied TPO Mechanical Fasten TPO Hot air Welding TPO Detailed Spots Strengthening Test Check
3. Installation
1) Clean the litters,dust on the substrate
2)Pave a layer of PE film,the overlap uses butyl adhesive tape to glue
3)Pave Extruded polystyrene foam insulation board(XPS),using exclusive fasteners to fasten the board
4)Pre-applied TPO membrane: Lay the TPO membrane on the insulation board in accordance with the snap line,paving direction should be perpendicular with the wave of profiled steel sheet,dispose the loose TOP membrane as the outline on the insulation board. Membrane remains flat and even,overlap is 12cm and appropriate trim is needed
5)Fasten the TPO membrane: Align edge of mark line 30mm install the fasteners and elastics
6)Membrane Overlap: One piece membrane laid on the other,use the automatic hot air welding machine to weld
7) Detailed Spots Strengthening: Trim adequate TPO membrane for detailed spots,use portable hot welding machine weld on the TPO membrane
8)TPO membrane edge treatment: Use batten to fasten the edge along with sealants