** Airless Paint Sprayer HK-731
** Features [HK-731] - Low-noise design to remove hearing trouble, High pressure pump of 474kgf/cm, Reduced freezing with mounted air jet system, Typical fluid handled : Inorganic-zinc, Tar-epoxy, Alkyd, Urethane, High viscosity paint, Application : Shipyards, Construction, Metal structure, Heavy anti-corrosive coating, High viscosity coating
** Technical Data [HK-731] - Pressrue Ratio : 73:1, Max.Delivery : 26L/min., Operating Air Pressure : 3~6.5kgf/cm, Max.Discharge Pressure : 474kgf/cm, Dimension [LxWxH] : 75x80x120cm, Weight : 100kg, Noise : 70~80dB, Air Motor Stroke : 120mm
Specifications 1.odorless 2.low VOC 3.antimicrobial 4. mildew resistant 5.environmentally friendly 6.waterproof 7.Scrub resistance Description It is an enhanced mildew proof product adopting nano-scale Ag+ antimicrobial and mildew proof technology, integrating odorless formula, with fresh product smell, smooth paint film, durable and beautiful paint.As an affordable and environmentally friendly product with excellent decorative performance, it is characterized by fresh smell, environmental health, strong covering power, large painting area, convenient constructionapplication, short constructionapplication period, etc. Specification Data Solvent: Water Pigment: Non-lead pigment Theoretical Solids By Volume: more than 50% Theoretical Coverage: Theoretically 1 litre of this product covers 12 sqm in 1 coat Coverage varies considerably depending on application methods and surface roughness and porosity. Shelf Life: Minimum 12 months at 77F(25C) unopened and store in cool and dry places. Recommended Film Thickness: Wet: 80 micron Dry: 30 micron Dry Time: At 77F (25C) and 50% R.H. to recoat Touch Dry: 1 hours Recoat : 2-3 hours Application: Brush, Roll, conventional spray or Airless Spray. Thinner: Thin up 15% depend on different application methods & temperature. Do not over thin by adding more than 30% water. Brush or Roller: For sealing new or bare surfaces thin with up to 1 part of clean water to 5-10 parts of paint(10%-20%) Conventional Spray: Add up to 1 part clean water to 5 parts paint(20%) Airless spray: do not thin Clean-up: Clean up equipment with water Typical painting system Substrate System All kinds of Wall surfaces 1.Alkali Resistance Primer (1 coat) 2.Emulsion Wall Paint (2 coats)
** Airless Paint Sprayer 67:1 ** Features [Part No. HK-671] - Low-noise design to remove hearing trouble - High pressure pump of 469kgf/cm - Reduced freezing with mounted air jet system - Typical fluid handled : Inorganic-zinc, Tar-epoxy, Alkyd, Urethane, High viscosity paint - Application : Shipyards, Construction, Metal structure, Heavy anti-corrosive coating, High viscosity coating ** Technical Data [Part No. HK-671] - Pressure Ratio : 67:1 - Max. Delivery : 34L/min. - Operating Air Pressure : 7kgf/cm - Max. Discharge Pressure : 469kgf/cm - Dimension [LxWxH] : 72x75x130cm - Weight : 121kg - Noise : 80dB - Air Motor Stroke : 120mm
Two component, acrylic aliphatic polyurethane coating. Offers excellent gloss and colour retention. It is used for subtracts as steel, aluminum, glass-fiber, plywood etc.
High-performance Dual Component Airless Paint Spraying Equipment HK-PFP-2000 Features [ Part No. HK-PFP-2000 ], No need for organic solvents, Heatable depending on the conditions of a main material and a hardener, Adjustable depending on the dilution ratio of a main material and a hardener, 1:1 to 3:1 when applied displacement pumps are a same size, Only used for fire-proof paint [CHARTEK7] **Technical Data [ Part No. HK-PFP-2000 ] - Pressure Ratio : 53:1, Ratio Range : 1.5:1~4.5:1 - Max. Delivery : 16.2L/min., Max. Cycle : 50cpm, Output per Cycle : 365cc, Operating Air Pressure : 7kgf/cm² - Max. Discharge Pressure : 372kgf/cm , Dimension [LxWXH] : 210x135x216cm, Weight : 1,890kg, Noise : 80dB, Air Motor Effective Diameter(Main) : 321mm, Air Motor Effective Diameter(Feeding) : 203mm, Air Motor Stroke : 120mm
Water Paints
Epoxy Finish Paint is two-component, polyamide adduct cured, General Purpose Air drying Epoxy Coating. Its Excellent substitute to Enamel.
** Airless Paint Sprayer HK-421 ** Features [HK-421] - Convenience of repair & maintenance - Low-noise design to remove hearing trouble - Reduced freezing with mounted air jet system - Typical fluid handled : Inorganic-zinc, Tar-epoxy, Alkyd, Urethane, High viscosity paint - Application : Container, Pier.Pipe coating, Drum coating, Heavy anti-corrosive coating ** Technical Data [HK-421] - Pressure Ratio : 42:1 - Max. Delivery : 20L/min. - Operating Air Pressure : 3~6.5kgf/cm² - Max. Discharge Pressure : 273kgf/cm² - Dimension(LxWxH) : 68x72x100cm - Weight : 80kg - Noise : 70~80dB - Air Motor Stroke : 120mm
** Airless Paint Sprayer HK-331 ** Features [HK-331] - Low-noise design - High pressure pump of 214kgf/cm² comparing with small size pump - Low-freezing design - Application : Timber products, Finishing coating, Heavy anti-corrosive coating
**Portable Dual Component Airless Paint Spraying Equipment HK-PDP-2000 **Features [Part No. HK-PDP-2000] - Easily portable dual liquid equipment - High-quality coating due to the applied paint hearing machine(A main material and a hardener) - Shortened drying time, Paint for heating is available - Adjustable depending on the dilution ratio of a main material and a hardener - 1:1 to 2:1 when applied displacement pumps are the same size **Technical Data [Part No. HK-PDP-2000] - Pressure Ratio : 74:1 - Ratio Range : 1.2:1~2.4:1 - Max.Delivery : 13.2L/min. - Max.Cycle : 50cpm - Output per Cycle : 265cc - Operating Air Pressure : 7kgf/cm - Max. Discharge Pressure : 518kgf/cm - Dimension[LxWxH] : 140x90x165cm - Weight : 440kg - Noise : 80dB - Air Motor effective Diameter[Main] : 321mm - Air Motor Effective Diameter(Feeding) : 203mm - Air Motor Stroke : 120mm
