8 10/100/1000Mbase Poe Ports Network Switch

Supplier: Consumer electronics, industrial control, and high speed connectivity cables and connectors.
Services: Manufacturer, designing, customization for consumer electronics, industrial control, and high speed connectivity cables and connectors.
Buyer: Consumer electronics, industrial control, and high speed connectivity cables and connectors.

HDV-8FE POE+2FE UP-WD is a standard PoE powered Ethernet switch designed and developed by HDV optical communication equipment. It adopts the latest high-speed Ethernet switch chip and ultra-high backplane bandwidth design. It has strong data processing capabilities and improves smooth data transmission performance.Supports 8*10 / 100Mbps Ethernet RJ45 ports with PoE function and 2*10 / 100Mbps Ethernet uplink RJ45 ports, each port supports auto rollover function (Auto MDI / MDIX).Among them, 8 ports with PoE function, all support IEEE 802.3af / at standard PoE power supply, which can be used as a power supply device for Ethernet. The maximum power supply of a single port is 30W and the maximum power of the whole machine is 150W. It can automatically detect and identify the IEEE 802.3af / at standard Powered equipment.Powered by a network cable, it supports 250 meters of long-distance transmission and supports priority mechanism power supply. Support VLAN isolation mode.

PRODUCT INTRODUCTION: RPOE switch has intelligent device Power management features solving a major problem of powering the device for internet service provider. This switch can be powered using remote power from customer using specially designed POE injector or any standard POE injector(24v DC,0.75amp).This eliminates the needs of arranging power at building top (ups not require/No need to pay more money to customer or society).This saves lot of money of ISPs and improves uninterrupted service to the customer. PRODUCT FEATURE: REVERSE POE TECHNOLOGY:8 Port 10/100 Reverse POE switch which has latest generation of fast Ethernet reverse POE switching technology. It contains 7*10/100 base T Reverse Poe ports (RPOE),1*10/100 Base date Uplink Port&12V DC out for Powering ONU. Supports Auto-Negotiation: Each of the ports automatically detect whether connected network devices are running at 10Mbps or 100Mbps and half-duplex or full-duplex mode, and adjusts the speed and mode accordingly ensuring easy and hassle-free operation. Supports Non-blocking Wire Speed: The switch forwards and receives traffic seamlessly with its Non-blocking wire- speed. Every port of the Switch supports speeds up to 200Mbps in full-duplex mode simultaneously, providing full wire speed to connected devices and allowing you to run a high speed network smoothly. Cascading support: switches can be cascaded for more users per Building (Up to 1 Main+3 switches ) Port base Isolation u/Hardware VLAN: The feature of Port Isolation is implemented in this unit where in the Ethernet Date of the Uplink Port can be transferred to any of the Downlink ports but the individual Downlink ports cannot communicate with each other. Over voltage Protection: Over voltage Protection is provided on each date port to eliminate damage due to connection of higher voltage(Higher than 24V DC. Up to 80V DC). By mistake if user connect more than 24V POE injector then switch will goes on power off mode and will start working again once this high voltage source is removed. Over current Protection: We have provided over current protection on each port to prevent damage to the switch in case of high current flowing due to any reason. This is provided using Resettable Fuse to facilitate easy maintenance and avoiding frequent change of blown fuse.

1. With 4x10/100/1000BaseT(X) PoE ports, and 1x1000BaseX port 2. Up to 30 watts output of each PoE port 3. Smart PoE over current and short circuit protection 4. Intelligent power consumption detection and classification 5. Redundant dual 48 VDC power inputs, Built-in over-current protection, Reverse connection protection 6. -40 to 75C operating temperature range (WT models) 7. No fan, low consumption, industrial design standard, industrial grade electronic components, environmental protection & lead-free production 8. Hard aluminum alloy case(Not sheet metal),DIN-rail and wall mounting 9. IP Rating up to IP40 10. No packet lost in 72 hours full load traffic testing

Features: 100/1000BASE-T1 via Marvell 88Q2112 PHY DC Voltage Requirements: 4.5-40Vdc Item will require the following items to work fully: Software, Cables, USB C cable Items Included: Intrepid Rad Moon 2 Media Converter Cable W/ power connector on one end 4500 units available

Supplier: Steel structures, high voltage & low voltage, cables/accessories, electrical & instrumentation products, industrial pumps, electric motors and accessories, industrial valves, gear drives, vfd drives, soft starters, transmission couplings, ht and lt control panels, mcc panels, fasteners & welding consumables, scaffolding material, chemicals, irrigation spares.
Services: Engineering procurement company/merchant exporter

Supplier: Japanese quality switchgear components, breakers, magnetic contactors, switches, pilot lights, pushbuttons, panel instrumentations, power management meter, protection relays, transformers, inverters, ups.