Flow: 10m3/h
Head: 21m
Power: 7.5kw
Material: cast iron
Medium: clean water
Outlet dia: 32mm
Diameter: 175mm
Speed: 2850r/min
Voltage: 380V
Phase: 3 phase/50Hz
Color: Blue
QJ Submersible pumps Parameters:
Flow range10~500m3/h, Lift scope within 5~405m;
Caliber scope 32~203mm, Temperature range-15~80° C.
Products Overview:
QJ Series submersible pumps widely used in farmland irrigation, spray irrigation and water-use, industrial and civil buildings, also the drainage system to level hills, mountain diversion and in low-lying areas dunes, urban and rural mining supply, drainage and other water conservancy facilities. Characteristics are that they are assembled into a simple structure they have installation convenience a small footprint, simple maintenance and a safe reliable operation.
Product use conditions:
QJ Submersible pumps use conditions
1. 380 V bias voltage does not exceed + -5% and 50 HZ frequency, and the deviation is not more than + -1% of the three-phase power supply.
2. Electrical cavity must be filled with water.
3. The first-class pump impeller should at least go into the dynamic water level 2 m below surface. Static pump unit immersed under water shall not be greater than 70 m.
4. Electrical from the bottom of the bottom of the well shall be not less than 3 m.
5. The water temperature no higher than 20 ° C, QJR-temperature hot water pump up to 80 ° C.
6. Water and sand content (by mass) of not more than 0.01%.
7. Water PH 6.5-8.5.
8. The hydrogen sulfide in water content is not more than 1.5 mg / L.
Application :
deep well water
farm irrigation
sprinkling irrigation
urban and rural industry
mine supply and drainage.
WIDELY APPLICATIONS The electric automatic drink dispenses for milk is suitable for most containers and is a good helper in your daily life, allowing you to easily drink the juice you want to drink, it can be used with different kinds of drinks, suitable for milk, juice, water and other drinks in restaurants, homes, offices etc. You can easily use one hand to touch the switch to get the drink you need. NO LIFTING Just touch the trigger and the drink will be dispensed automatically. No need to lift heavy drink containers. Kids can help themselves, you will get 2pcs automatic drink dispenser electric milk tap (please note: NOT including batteries), with 4 stainless straw, 1pcs cleaning brush, and 1pcs straw storage bag, perfect to meet your need. ã??EASY TO USEã??Automatic tap dispenser for kids fits easily on a wide variety of beverage containers, turns any beverage container into an easy-to-use drink dispenser that eliminates the need to lift heavy bottles, also prevents spills, drips, and waste. ã??BATTERY-POWEREDã??The drink dispenser for milk needs 2 "AA" Battery operated (not included). The tap turns any beverage container into an easy-to-use drink dispenser that eliminates the need to lift heavy bottles. ã??SAFE MATERIALã??The tap automatic drink dispenser is made of PP and silicone materials and easy to clean, sturdy and durable. The electric tap for milk can be used for a long time. This electric tap is suitable for most containers and has no harm to the human body. It is worthy of parents' trust.
Qj submersible pumps parameters: Flow range10~500m3/h, lift scope within 5~405m; Caliber scope 32~203mm, temperature range-15~80° c. Products overview: Qj series submersible pumps widely used in farmland irrigation, spray irrigation and water-use, industrial and civil buildings, also the drainage system to level hills, mountain diversion and in low-lying areas dunes, urban and rural mining supply, drainage and other water conservancy facilities. Characteristics are that they are assembled into a simple structure they have installation convenience a small footprint, simple maintenance and a safe reliable operation. Product use conditions: Qj submersible pumps use conditions 1. 380 v bias voltage does not exceed + -5% and 50 hz frequency, and the deviation is not more than + -1% of the three-phase power supply. 2. Electrical cavity must be filled with water. 3. The first-class pump impeller should at least go into the dynamic water level 2 m below surface. Static pump unit immersed under water shall not be greater than 70 m. 4. Electrical from the bottom of the bottom of the well shall be not less than 3 m. 5. The water temperature no higher than 20 ° c, qjr-temperature hot water pump up to 80 ° c. 6. Water and sand content (by mass) of not more than 0.01%. 7. Water ph 6.5-8.5. 8. The hydrogen sulfide in water content is not more than 1.5 mg / l.