1)numeral and lcd display
2 )lcd display shows the distance to 0.01m
3)step-up buzzer alarm
4)numeral display from 1.80m to 0.30m.
5)2, 4, 6, 8 sensors for option
6)yellow, blue color background light in display for option
Contact abby to get product pitures.
Supplier: Wireless charger, batteries power bank, dust sensor, optical disc drive, tof, lidar, ar glass
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
1?no display 2?step-up buzzer alarm 3?buzzer alarm switch:off, lo, hi 4?detective distance from 1.8m to 0.3m 5 ?2, 3, 4, 6, 8, sensors for option Contact abby to get product pictures .
Supplier: Biscuits, toothpaste, laminated rolls, packing material, raw material, extra neutral alcohol, shrink films, copier paper, aluminum foil, deo, perfumes, toothpaste, glycerine, pet resins, cable, wires, dg sets, transformers, automobiles, bikes, electric bikes, vehicles, canned food, coffee, peanut butter, ena, petroleum jelly, soap noodles, pp bags, corrugated boxes, personal care products, shampoo, conditioner, face cream, candies, lollipops, skin care, hair care, over the counter, a4 paper, paper, packing film, packaging film
Services: Exporting from india
1.Digital LCD showing obstacle distance. 2.VFD1-Y4 reporting the distance with the voice. 3.VFD-Y4 alarm by chord music. 4.Colorized LCD screen. 5.The simulative vehicle. 6.2í½8 sensors are available. 7. All kinds of sensor colors and styles are available. 8.High quality and easy to install. 20 pcs/ctn CBM of one carton is 0.08 weight of one carton is 18 KGS
Specifications: 1. Digital LCD showing obstacle distance 2. 4 sensors for rear available 3. Alarm by Bi-Bi sound, 4. Blue color background 5. The simulative vehicle is displayed in the colorized screen 6. Digital signs (Attention, Brake & Stop) will be displayed in the colorized screen 7. All kinds of sensor colors and styles are available 8. High quality and easy to install Technical: 1. Rated Voltage: 12V DC 2. Operating Range: 10.5Ví½ 16V DC 3. Rated Current: 50mAí½ 180mA 4. Detecting Distance: 0.3í½ 2.0m 5. Ultrasonic Frequency: 40KHz 6. Display Working Temperature: -30 í½ +70íµ There are 3 kind of sensor can be used: 1) Normal sensor: SB308-4, SB308-6 ,SB308-8 2)Luminous sensor: SB308F-4, SB308F-6 3)Interchangeable sensor: SB308S-4 , SB308S-8 Packing Details: 1)Carton Size: 460mmX310mmX510mm 2) Quantity: 20 PCS/ CTN 3) G.W.: 14 KG 4) N.W.: 13 KG