Clean all Heavy Industrial Cleaner removes paint, graffiti, tar, adhesives, resins, acrylic coatings, floor wax and ink ¡X as well as dirt and oils ¡X from a variety of surfaces; its balanced pH"7" simply dissolves whatever is on the surface. Its primary uses are industrial, commercial and residential on all surfaces including concrete, brick, masonry, stucco, cinder block, vinyl siding, wood, metal and fiberglass.
Clean all Heavy Industrial Cleaner is designed to be used prior to application of our GBS Penetrating Sealer or Penetrating Gloss Sealer.
This product should be diluted, based on the job to be performed: five-to-one water to cleaner for normal cleaning; one-to-ten for heavy cleaning; oil, grease, paint or adhesives.
Clean All Heavy distributes non-toxic, biodegradable oil dispersant products. CAH is a dispersant, detergent, and degreaser. non-hazardous and solvent-free. The biodegradability of CAH is 100%. Tests conducted under OECD regulations have shown that CAH is: „h
Rapidly and readily biodegradable „h
Non-toxic to animals and fish when administered in a single oral dose „h
Not an irritant to skin „h
Not an irritant for eyes „h
Non-flammable „h
Free of arsenicals, iodine, formaldehyde, mercury compounds, phenols, abrasives, free hetero glycolic acids, soaps, free sodium or caustic potasil, oil, distillations of any kind and sodium orthosilicate CAH is effective in combating oil spills and the remediation of contaminated soil and water
Product introduction: Oil Spill Dispersant is mainly made of non-ionic surfactant by special process. Oil Spill Dispersant is a water-based oil spill dispersant with high efficiency and easy biodegradation. Oil Spill Dispersant is also the second generation of oil spill dispersant products that attract international attention. Scope of application: Oil Spill Dispersant is applicable to a variety of hydrocarbon products (such as heavy oil, clean oil, lubricating oil, diesel, mixed oil, etc.). Oil Spill Dispersant is used in different oil spill site environments, such as oil spill in open waters, oil spill in loading or lightering, oil spill in large tanks or oil tanks, and salvage engineering to control the spread of oil pollution. The oil remover is also used for cleaning heavy oil stains such as oil tanks, engine rooms, bulkheads, oil pipes and guardrails on board. Usage: when spraying oil spill dispersant on the water surface, timely adjust the spraying rate and the moving speed of the vehicle to emulsify and disperse the oil spill. Spray the oil eliminator from the upper wind head to the lower wind. Spray the Oil Spill Dispersant around the oil film first and gradually towards the middle of the oil film. It can make full use of the mixing effects of wind and wave, bow wave, propeller or drainage, or stir the water surface of the spraying part with the help of faucet water injection or towing mixing device. Spraying oil eliminator before the spilled oil arrives at the beach can reduce the degree of pollution and the workload of cleaning. Spraying dose: generally 20% of the oil spill
Supplier: Oil spill disperse, rig wash, convergent wash
Oil Resistant, Wear-resistant, Seawater Corrosion Resistant and UV Aging Resistant. Suitable for Controlling the Diffusion and Transfer of Oil Spill in Ocean or Other Waters.
Oil Resistant, Wear-resistant, Seawater Corrosion Resistant and UV Aging Resistant. Suitable for Controlling the Diffusion and Transfer of Oil Spill in Ocean or Other Waters.
Oil Resistant, Wear-resistant, Seawater Corrosion Resistant and UV Aging Resistant. Suitable for Controlling the Diffusion and Transfer of Oil Spill in Ocean or Other Waters.
Features: 1. Oil absorbent boom is made of super absorbent polypropylene with strong outer mesh There is a nylon cable running through each boom which can be connected each other by a special steel connector. 2. There are a full range of oil absorbent material similar to oil absorbent boom like oil absorbent pillow, oil absorbent sweep and ect. 3. The oil sorbent boom can be used to control oil spills such as fuel oil, hydraulic oil, gasoline, diesel and ect. Item Dimension Pack(Bag or Carton) Absorb Capability Weight XTL127-1 Marine Oil absorbent Booms 12.7cm*3M 4pcs/ B 96 L/ B 8 kg/ B XTL127-2 Marine Oil absorbent Booms 12.7cm*6M 2pcs/ B 96 L/ B 8 kg/ B XTL220-1 Marine Oil absorbent Booms 20cm*3M 4pcs/ B 192 L/ B 16 kg/ B XTL220-2 Marine Oil absorbent Booms 20cm*6M 2pcs/ B 192 L/ B 16 kg/ B
Features: 1. Oil absorbent boom is made of super absorbent polypropylene with strong outer mesh There is a nylon cable running through each boom which can be connected each other by a special steel connector. 2. There are a full range of oil absorbent material similar to oil absorbent boom like oil absorbent pillow, oil absorbent sweep and ect. 3. The oil sorbent boom can be used to control oil spills such as fuel oil, hydraulic oil, gasoline, diesel and ect. ItemDimensionPack(Bag or Carton)Absorb CapabilityWeight XTL127-1 Marine Oil absorbent Booms12.7cm*3M 4pcs/ B96 L/ B8 kg/ B XTL127-2 Marine Oil absorbent Booms12.7cm*6M2pcs/ B96 L/ B8 kg/ B XTL220-1 Marine Oil absorbent Booms20cm*3M4pcs/ B192 L/ B16 kg/ B XTL220-2 Marine Oil absorbent Booms20cm*6M2pcs/ B192 L/ B16 kg/ B
Features: 1. Disc/brush oil recovery skimmer is a floating oil skimmer with rotating disc or brush to recovery the oil spills in water. 2. The disc and brush could be exchangable according to customers requirement. It consists of a power pack, a floatable head and linking hoses between the head and power pack. 3. There are many models to suit oil viscosity and recovery conditions. These devices have been widely used on open seas, rivers, harbors, lakes and ponds. Technical Data: Model/Parameter ZSJ5 ZSJ10 ZSJ20 ZSJ30 ZSJ60 rotate speed (R/M) 40-100 40-100 40-200 40-300 40-600 Working pressure(Mpa) 3~6 3~6 3~6 3~6 5~8 Flow rate of oil pump(m/h) 5 10 20 30 60 recovery capability(m/h) 5 10 20 30 60 drive power(diesel engine or explosion-proof motor)KW 4.0/3 6.3/4 4.0+6.3/7.5 14.5/11 21/15 main unit weight (Kg) 55 70 120 160 200 weight of power station (KG) 100 115 255 500 550 diameter of oil discharge hose 2 2 2.5 3 4
Features: 1. Disc/brush oil recovery skimmer is a floating oil skimmer with rotating disc or brush to recovery the oil spills in water. 2. The disc and brush could be exchangable according to customers requirement. It consists of a power pack, a floatable head and linking hoses between the head and power pack. 3. There are many models to suit oil viscosity and recovery conditions. These devices have been widely used on open seas, rivers, harbors, lakes and ponds. Technical Data: Model/ParameterZSJ5ZSJ10ZSJ20ZSJ30ZSJ60 rotate speed (R/M)40-10040-10040-20040-30040-600 Working pressure(Mpa)3~63~63~63~65~8 Flow rate of oil pump(m/h)510203060 recovery capability(m/h)510203060 drive power(diesel engine or explosion-proof motor)KW4.0/36.3/44.0+6.3/7.514.5/1121/15 main unit weight (Kg)5570120160200 weight of power station (KG)100115255500550 diameter of oil discharge hose222.534
