The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste.
After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material.
At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form.
The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues.
The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process.
Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed.
The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise.
The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container.
Please feel free to contact us for further details.
Raw melting material - aluminum scraps, cans, engine waste etc.
Output capacity - 5-30 tons/h, customized
Automation - Full automatic/ half automatic (based on output requirement and investment budget
Ingot type - ADC12 (7.5kg/ 10kg / customized)
1. After cleaning the oil and grease of waste aluminum, manually put it into the furnace with a forklift;
2. Ignition for melting furnace .Heat up to 680C, and input appropriate proportion of alloy elements. Heat up to 800C, melt and stir evenly, then fetch samples to the spectrometer for testing.
Every lot of production need to do testing .
3. Put A tool that attracts iron into the furnace by forklift, to suck away the iron in the aluminum water.
4. Put the slag agent into Alu liquid to remove the slag. After slag removed , put the slags into Aluminum ash separation machine , and let the aluminum water and ash separate. The proportion of slag agent and aluminum liquid is 1:500
5.Open the drain valve and the aluminum water flows automatically to the ingot production line After the ingot casting is completed, the ingot stacking robot will stack the ingots, which means the production is completed.
Ferro Silico Manganese (FeSiMn) is a ferrous alloy that is produced by melting manganese ore and quartzite in the presence of coke in an arc furnace .
Ferro Silico Manganese is an important deoxidizer, desulphurizer, and alloying element that increases the tensile strength, toughness, stiffness, wear resistance, and hardenability of steel, helping to improve the safety and effectiveness of the end product . It is widely used in the steelmaking industry and has become the essential deoxidizing agent and additive in the steelmaking industry .
The process of producing Ferro Silico Manganese is much more difficult than ferromanganese. The main reason is that a higher temperature is needed to reach the desired silicon level �¹. Slag generated in the production of high carbon ferromanganese is commonly used to produce FeSiMn .
Ferro Silico Manganese is available in different types, and it can be used for various applications, such as cladding, decking, ceilings, walls, and saunas .
In summary, Ferro Silico Manganese is a ferrous alloy that is produced by melting manganese ore and quartzite in the presence of coke in an arc furnace. It is widely used in the steelmaking industry as an important deoxidizer, desulphurizer, and alloying element that increases the tensile strength, toughness, stiffness, wear resistance, and hardenability of steel, helping to improve the safety and effectiveness of the end product. It is available in different types and can be used for various applications, such as cladding, decking, ceilings, walls, and saunas.
It is produced by melting manganese ore, coke, and iron ore in a furnace . The resulting product is a dark gray powder or lump that is used in the production of steel and cast iron .
FeMn is an important alloying element that increases the tensile strength, toughness, stiffness, wear resistance, and hardenability of steel, helping to improve the safety and effectiveness of the end product . It is widely used in the steelmaking industry and has become an essential deoxidizing agent and additive in the steelmaking industry.
In summary, Ferro Manganese (FeMn) is an alloy of iron and manganese, containing usually about 80% manganese. It is produced by melting manganese ore, coke, and iron ore in a furnace. FeMn is used mainly to counteract the bad effects of sulfur, acts as a deoxidizer, and imparts metallurgical properties such as increased strength, hardness, toughness, and hardenability. It is available in different types and can be used for various applications, such as cladding, decking, ceilings, walls, and saunas.
Application Nickel plating is used in various alloys such as new silver, Chinese silver, German silver; for coins, electronic boards, storage batteries; magnets, lightning rod tips, electrical contacts and electrodes, spark plugs, mechanical parts; catalysts for the hydrogenation of oils and other organic substances. See also Raney nickel. Manufacture of monel metal, stainless steel, heat-resistant steel, heat-resistant and corrosion-resistant alloys, nickel-chromium resistance wire; alloys for electronic and space applications. Use Nickel is used in various alloys such as German silver, monel and nickel-chromium alloys; for coins; coins, metals, etc. In storage batteries; in spark plugs; and as a hydrogenation catalyst. Preparation Nickel is obtained by processing sulfide and laterite ore concentrates using pyrometallurgical and hydrometallurgical processes. The nickel matte powder obtained by roasting and smelting is further cleaned by electrometallurgical, steam and hydrometallurgical refining methods. A portion of the matte surface is baked to obtain commercially available nickel oxide agglomerates. 99.9% pure nickel can be obtained by electrolytic refining process. The purest nickel (99.97%) is obtained by vapor metallurgy. In this process, also known as the Mond Chemicalbook process, a mixture of nickel and copper sulfide is converted into oxides and then reduced by heating with water vapor at 350â??400 �° C. The resulting active form of nickel is treated with carbon monoxide to obtain volatile nickel carbonyl [Ni (CO) 4]. The reaction of the latter is reversible. Heating produces pure nickel and carbon monoxide. Overview Nickel is a slightly yellowish silvery-white metal, hard, easy to polish, magnetic (not as good as iron and cobalt) and good plasticity. Density 8.902g/cm3, melting point 1453 �° C, boiling point 2732 �° C. The chemical properties are relatively active. It has good corrosion resistance, is difficult to oxidize in air at room temperature, is not easy to react with concentrated nitric acid, and can resist alkali corrosion. Fine nickel wire is flammable, reacts with halogens when heated, and slowly dissolves in dilute acid. It can absorb a considerable amount of hydrogen. It is mainly used to make various alloys composed of iron, copper, zinc and other metals, and is widely used in cutting-edge technology, high-temperature ceramic products, corrosion-resistant alloys, chemical equipment, electronic and electrical equipment, special utensils, glass and other industries. Adding nickel to steel can improve the toughness and corrosion resistance of steel, such as nickel steel, chrome-nickel steel, etc.
in coils
5m-14m,5.8m,6m,10m-12m,12m or as customer's actual reques
Standard
JIS G3466, EN 10219, GB/T 3094-2000, GB/T 6728-2002
Section Shape
Round
Technique
Hot rolled
Packing
Bundle, or with all kinds of colors PVC or as your requirements
Surface Treatment
1. Galvanized
2. Transparent oil,anti-rust oil
3. According to clients requirement
Ends
Plain end
MOQ
1 Tons, more quantity price will be lower
Product Application
1. Fence, greenhouse, door pipe,greenhouse
2. Low pressure liquid, water, gas, oil, line pipe
3. For both indoor and outdoor the building construction
4. Widely used in scaffolding construction which is much cheaper and convenient
Wire rods are mainly used as blanks for wire drawing, and can also be directly used as building materials and processed into mechanical parts.
Wire rod, also known as wire rod, usually refers to small diameter round steel in coils. The diameter of the wire rod is in the range of 5-19 mm (usually 6-9 mm), and its lower limit is the minimum size of the hot rolled steel section.
Wire rods are round steel with relatively small diameter. The commodity form is supplied in coils. On the construction site, the common ones are those with diameters of 6, 8, 10 and 12 mm, most of which are low carbon steel. Generally, they are not used for the main reinforcement of reinforced concrete structures, but are mainly used for making reinforcement sleeves. There are also small diameter "brick reinforcement" used in brick concrete structures.
in coils
5m-14m,5.8m,6m,10m-12m,12m or as customer's actual reques
Standard
JIS G3466, EN 10219, GB/T 3094-2000, GB/T 6728-2002
Section Shape
Round
Technique
Hot rolled
Packing
Bundle, or with all kinds of colors PVC or as your requirements
Surface Treatment
1. Galvanized
2. Transparent oil,anti-rust oil
3. According to clients requirement
Ends
Plain end
MOQ
1 Tons, more quantity price will be lower
Product Application
1. Fence, greenhouse, door pipe,greenhouse
2. Low pressure liquid, water, gas, oil, line pipe
3. For both indoor and outdoor the building construction
4. Widely used in scaffolding construction which is much cheaper and convenient
in coils
5m-14m,5.8m,6m,10m-12m,12m or as customer's actual reques
Standard
JIS G3466, EN 10219, GB/T 3094-2000, GB/T 6728-2002
Section Shape
Round
Technique
Hot rolled
Packing
Bundle, or with all kinds of colors PVC or as your requirements
Surface Treatment
1. Galvanized
2. Transparent oil,anti-rust oil
3. According to clients requirement
Ends
Plain end
MOQ
1 Tons, more quantity price will be lower
Product Application
1. Fence, greenhouse, door pipe,greenhouse
2. Low pressure liquid, water, gas, oil, line pipe
3. For both indoor and outdoor the building construction
4. Widely used in scaffolding construction which is much cheaper and convenient
Wire rods are mainly used as blanks for wire drawing, and can also be directly used as building materials and processed into mechanical parts.
Wire rod, also known as wire rod, usually refers to small diameter round steel in coils. The diameter of the wire rod is in the range of 5-19 mm (usually 6-9 mm), and its lower limit is the minimum size of the hot rolled steel section.
Wire rods are round steel with relatively small diameter. The commodity form is supplied in coils. On the construction site, the common ones are those with diameters of 6, 8, 10 and 12 mm, most of which are low carbon steel. Generally, they are not used for the main reinforcement of reinforced concrete structures, but are mainly used for making reinforcement sleeves. There are also small diameter "brick reinforcement" used in brick concrete structures.
5m-14m,5.8m,6m,10m-12m,12m or as customer's actual reques
Standard
JIS G3466, EN 10219, GB/T 3094-2000, GB/T 6728-2002
Section Shape
Round
Technique
Hot rolled
Packing
Bundle, or with all kinds of colors PVC or as your requirements
Surface Treatment
1. Galvanized
2. Transparent oil,anti-rust oil
3. According to clients requirement
Ends
Plain end
MOQ
1 Tons, more quantity price will be lower
Product Application
1. Fence, greenhouse, door pipe,greenhouse
2. Low pressure liquid, water, gas, oil, line pipe
3. For both indoor and outdoor the building construction
4. Widely used in scaffolding construction which is much cheaper and convenient
Wire rods are mainly used as blanks for wire drawing, and can also be directly used as building materials and processed into mechanical parts.
Wire rod, also known as wire rod, usually refers to small diameter round steel in coils. The diameter of the wire rod is in the range of 5-19 mm (usually 6-9 mm), and its lower limit is the minimum size of the hot rolled steel section.
Wire rods are round steel with relatively small diameter. The commodity form is supplied in coils. On the construction site, the common ones are those with diameters of 6, 8, 10 and 12 mm, most of which are low carbon steel. Generally, they are not used for the main reinforcement of reinforced concrete structures, but are mainly used for making reinforcement sleeves. There are also small diameter "brick reinforcement" used in brick concrete structures.
in coils
5m-14m,5.8m,6m,10m-12m,12m or as customer's actual reques
Standard
JIS G3466, EN 10219, GB/T 3094-2000, GB/T 6728-2002
Section Shape
Round
Technique
Hot rolled
Packing
Bundle, or with all kinds of colors PVC or as your requirements
Surface Treatment
1. Galvanized
2. Transparent oil,anti-rust oil
3. According to clients requirement
Ends
Plain end
MOQ
1 Tons, more quantity price will be lower
Product Application
1. Fence, greenhouse, door pipe,greenhouse
2. Low pressure liquid, water, gas, oil, line pipe
3. For both indoor and outdoor the building construction
4. Widely used in scaffolding construction which is much cheaper and convenient
Wire rods are mainly used as blanks for wire drawing, and can also be directly used as building materials and processed into mechanical parts.
Wire rod, also known as wire rod, usually refers to small diameter round steel in coils. The diameter of the wire rod is in the range of 5-19 mm (usually 6-9 mm), and its lower limit is the minimum size of the hot rolled steel section.
Wire rods are round steel with relatively small diameter. The commodity form is supplied in coils. On the construction site, the common ones are those with diameters of 6, 8, 10 and 12 mm, most of which are low carbon steel. Generally, they are not used for the main reinforcement of reinforced concrete structures, but are mainly used for making reinforcement sleeves. There are also small diameter "brick reinforcement" used in brick concrete structures.
