Jinyi Non-Pressurized Solar Water Heater

Non-Pressurized Solar Collector Solar Water Heater (60L 80L 100L 140L 160L 180L 240L 300L 400L 500L) Specialty 1. Economical type for most of area, common people can afford it 2. Simple product structure: Solar collector and water tank connected together directly, no need of pipe to connect, and no pump to push fluid 3. Mature technology and stable operation 4. Higher efficiency on photo thermal conversion.  5. Accessory is popular and easy maintenance Solar water heater Specifications:  1) Inner tank thickness of solar heater: 0.4mm, 360mm/370mm/380mm 2) Outer tank thickness of solar heater: 0.4mm, 460mm/470mm/480mm 3) Inner tank of solare water heater: SUS304 food grade stainless steel.  4) solar water heater Outer tank: Stainless steel, 0.4mm 5)solar water heater tank capacity: 80L/100L/120L/150L/180L/200L/240L/250L/300L 6) Thickness of solar water heater bracket: 1.5mm 7) Glass vacuum tube of solar water heater: 58mm X 1800mm Remark:  1. Solar heat storage tank diameter(mm): 460mm/480mm 2. Thickness, insulated(mm): 50mm 3. Vent connection(inch): 1/2''or /3/4'' 4. Electric heater: 47mm 1500W, 3/4'' 5. Water connection(inch): 1/2'' or 3/4'' 6. Collector angle(degree): 25-45

Ke58s Vacuum tube: 58x1800mm Inner tank: stainless steel 304 2b food grade Outer tank: aluminum galvanized sheet Folded from mould with powder painting Outer tank dia.460mm Frame: aluminum with anti-oxidation treatment Insulation: 50mm polyurethane total forming with pressure and best density 40kgs/m3 Available sizes: 18, 20, 22, 24, 28, 30, 36 Tubes with capacity 135l up to 325l In cartons

Material and major element of solar water heater: 1. Inner water tank: sus304-2b stainless steel /0.5mm thick 2. Outer water tank: white plate /0.4mm thick 3. Bracket: sus430 stainless steel /1.2mm and 1.5mm thick 4.Solar vacuum tube: A) size: 47 x 1, 500mm / 58 x 1, 800mm B) qty: 15 /18 / 20 / 24 / 30 pcs 5.Temperature insulation layer; 5.5cm imported polyurethane, keep same temperature and high pressure foam 6.Tank diameter:460 mm

Features: 1) The design of this type uses the all-glass evacuated solar collector tubes as the heat-absorb element. 2) Easy plug-in installation 3) Outer tank material: stainless steel plate or powder coated color steel sheet Key specification: 1) Inner tank: stainless steel SUS304-0.4mm 2) Vacuum tube: Ñ+47 x 1,500mm, Ñ+58 x 1,800mm 3) Tank diameter: 410mm, 460mm, 490mm 3) Outer tank: colored steel-0.4mm 4) Insulation: polyurethane 50mm-60mm 5) Frame: coated galvanized steel-1.5mm/stainless steel-1.5mm Type Area( º¦ ) Vacuum tube Volume(liters) Gross wet(kg) 20GP/40GP/40HC loading Qty(sets) ¿¬(mm) Length(mm) Qty(pcs) LC47/1500-15 1.87 47 1500 15 80 53 56/118/134 LC47/1500-15 1.87 47 1500 15 110 55 52/114/128 LC47/1500-18 2.25 47 1500 18 100 60 48/104/118 LC47/1500-18 2.25 47 1500 18 150 65 40/88/100 LC47/1500-20 2.50 47 1500 20 110 67 45/96/108 LC47/1500-20 2.50 47 1500 20 165 72 38/80/92 LC47/1500-24 3.00 47 1500 24 130 75 38/84/96 LC47/1500-24 3.00 47 1500 24 200 80 34/70/78 LC47/1500-30 3.75 47 1500 30 160 85 34/70/78 LC47/1500-30 3.75 47 1500 30 245 91 30/64/68 LC47/1500-36 4.50 47 1500 36 195 98 28/61/70 LC47/1500-36 4.50 47 1500 36 300 105 26/54/60 LC58/1800-12 2.24 58 1800 18 100 45 48/100/116 LC58/1800-14 2.60 58 1800 14 120 50 42/88/100 LC58/1800-16 3.00 58 1800 16 140 58 38/78/84 LC58/1800-18 3.40 58 1800 18 160 65 36/76/80 LC58/1800-20 3.70 58 1800 20 180 70 32/68/72 LC58/1800-24 4.50 58 1800 24 220 78 26/56/20 LC58/1800-30 5.60 58 1800 30 280 95 22/46/52

1.Non-pressure one pipe inlet-outlet: Characteristics: This type uses the all-glass evacuated solar collector tubes as the heater-absorbing element. The high vacuum degree of the clearance between the out and inner tube reduces the heat emission. The layer films(coating) of all-glass evacuated tubes transfer the sun energy into heat energy. Depending on the different density between hot water and cold water, a water flowing cycle is created in the tube. Hot water flows automatically upwards while the cold water flows down,The water in the storage tank will be heated this natural circulation. Material: Ocean01 a. Vacuum tube: GB-AL-N/AL-47-1500/58-1800 b. Inner tank: SUS304-2B,0.4mm C. Out tank: SUS304-BA,0.4mm d. Frame: SUS202,1.2mm e. The material of insulation: polyurethane Ocean02 a. Vacuum tube: GB-AL-N/AL-47-1500/58-1800 b. Inner tank: SUS304-2B,0.4mm C. Out tank: drawbench silver steel,0.4mm d. Frame: coated galvanized steel-1.5mm e. The material of insulation: polyurethane Ocean03 a. Vacuum tube: GB-AL-N/AL-47-1500/58-1800 b. Inner tank: SUS304-2B,0.4mm C. Out tank: drawbench silver steel,0.4mm d. Frame: Aluminium alloy, 2.5mm e. The material of insulation: polyurethane Split pressurized flat plate solar water heaters Characteristics: a. Collector separates with the storage tank. The tank can be put anywhere of the house b. And the collector can be put on both tilted roof and flat roof c. Module design, arbitrary combination, harmony with the building perfectly. d. Intelligent control and automatic operation e. Anti-freeze: no water inside the tubes when it works f. The system controller has the anti-freezing function is that the temperature circulation will operate while it reaches the fixed temperature. g. Multifunction: bathing, washing, domestic heating h. Working at any time and enjoyable. Material: Ocean04 a. Vacuum tube: GB-CU-SS-N/AL-58-1800 b. Inner tank: SUS304-2B,1.2-2.0mm C. Out tank: Painted steel-0.4mm d. Frame: Aluminum alloy,2.0mm Integrated pressurized flat plate solar water heater Characteristics: a. It is completely made of copper, good performance under pressure; the black-chrome-plated copper-strip and copper-pipe is welded by ultrasonic welding machine b. The black-chrome-plated coating has excellent quality, with high absorption efficiency and low emissivity c. The coating is resistant to high temperatures of 220 centigrade., the performance and quality of collector will not be affected; materials and coatings can bear fierce weather and have long life span; endothermic copper-strip with Nickel-plated has excellent resistance to corrode, which can be used more than 15 years. Material: Ocean05 a. Inner tank: SUS304-2B,1.2mm b. Core: black chrome C. Out tank: Drawbench silver steel, 0.4mm / stainless steel,0.4mm d. Frame: Aluminum,2.5mm Flat plate solar water heaters. Customized.

1. The outer tank: Color Coated Steel, thickness 0.4mm. 2. The inner tank: SUS304/2B, thickness0.5mm. 3. The warm keeping layer: polyurethane foaming 55mm. 4. The bracket, Galvanized Steel, thickness 1.5mm 5. Vacuum tube: 47-1500 or 58-1800, Two layer. 6. Angel of bracket: as your need.

Thermosyphon solar water heater relies on the natural circulation of water between the collector and the tank or heat exchanger. As water in the vacuum tubes is heated it rises naturally into the tank, while cooler water in the tank flows down to the bottom of the vacuum tubes, causing circulation throughout the system. Technical specificationa *Both of inner and outside water tank shell are made of SUS3042B food grade stainless steel plates, welded by argon arc. Water is pure and drinkable. *Heat insulation of water tanks adopts polyurethane foam, thickness is 55mm. *Silicon rings to connect and seal them. *The tubes and supports are adjustable, power bearing is average, and can assure the vacuum tubes to use for long time. *Whole glass vacuum tubes adopt super hard borax and silica glass. *Absorb rate:=93%, thermal radiation rate:=6%(100 íµ) *Resist 25mm hail, using life can last 15 years. *Temperature when exposed to sun without water:250íµ, 2.5hours to boiling if using single tube. *If you use electrical appliances to aid heating, to switch off the power supple before boiling. *To test the water temperature before using, in order to avoid scalding.