Refractoriness under load 0.2mpa (oc)t0.6¡¡§oo >1420
Main raw material: mullite, flint, etc.
Physical index¡¨ºo Porosity¡¨ºo12.0 ¡¡ìc 16.0 % Pressure¡¨ºo45 - 90 Refractoriness under load 0.2mpa (oc)t0.6¡¨ºo >1420 Main raw material: mullite, flint, etc.
Specifications 1.odorless 2.low VOC 3.antimicrobial 4. mildew resistant 5.environmentally friendly 6.waterproof 7.Scrub resistance Description It is an enhanced mildew proof product adopting nano-scale Ag+ antimicrobial and mildew proof technology, integrating odorless formula, with fresh product smell, smooth paint film, durable and beautiful paint.As an affordable and environmentally friendly product with excellent decorative performance, it is characterized by fresh smell, environmental health, strong covering power, large painting area, convenient constructionapplication, short constructionapplication period, etc. Specification Data Solvent: Water Pigment: Non-lead pigment Theoretical Solids By Volume: more than 50% Theoretical Coverage: Theoretically 1 litre of this product covers 12 sqm in 1 coat Coverage varies considerably depending on application methods and surface roughness and porosity. Shelf Life: Minimum 12 months at 77F(25C) unopened and store in cool and dry places. Recommended Film Thickness: Wet: 80 micron Dry: 30 micron Dry Time: At 77F (25C) and 50% R.H. to recoat Touch Dry: 1 hours Recoat : 2-3 hours Application: Brush, Roll, conventional spray or Airless Spray. Thinner: Thin up 15% depend on different application methods & temperature. Do not over thin by adding more than 30% water. Brush or Roller: For sealing new or bare surfaces thin with up to 1 part of clean water to 5-10 parts of paint(10%-20%) Conventional Spray: Add up to 1 part clean water to 5 parts paint(20%) Airless spray: do not thin Clean-up: Clean up equipment with water Typical painting system Substrate System All kinds of Wall surfaces 1.Alkali Resistance Primer (1 coat) 2.Emulsion Wall Paint (2 coats)
ASME/ANSI Standard: ASME B16.9,ASME B16.28,ASTM A860,MSS SP-75,MSS SP-97,MSS SP-43 EN/DN Standard: EN 10253,DIN2605,DIN2615,DIN2616,DIN2617 JIS Standard: JIS B2311,JIS B2312,JIS B2313 GB Standard: GB/T 12459,GB/T 13401,GB/T 19326 GOST Standard: GOST 17375,GOST 17376,GOST 17378 Type: Elbow(SR,LR,3D,5D):45�°,90�°,180�° Reducer(Bell Shape,Cone Shape):Concentric,Eccentric Tee:Straight,Reducing Cross:Straight,Reducing Cap Bend Outlet Lap Joint Stub End 45�° Lateral Tee:Straight,Reducing Swaged Nipple:Concentric,Eccentric Surface: Bare or Coated Protective Paint or Anticorrosive Coating or Galvanized Size: 1/2" NB to 80" NB Material: Carbon Steel,Alloy Steel,Stainless Steel MOQ: 5 Nos Transportation: FCL&LCL by sea Delivery: 10-15 days after signed contract Payment: L/C or T/T or D/P or O/A
PRODUCT DATA SHEET ACID RESISTANT BRICK Material : RED SHALE Type Acid Resistant Brick Size (mm) 230 (LENGTH) X 115 (WIDTH) X 100,76,65,50,40,38,30,25 (THICK) Specification : ASTM C279, ASTM C410, IS 4860-1982 DESCRIPTION : We offer premium quality acid resistant bricks Red â?? Shale , tiles and special shapes. We also offer customized sizes as per clients' requirements. Our acid bricks comply with ASTM C279 Type-III, ASTM C410 Type H, L, and Indian Standard 4860 - 1982 Class-I for all applications where low absorption and high acid resistance is required. FEATURES OF ACID RESISTANT BRICK: Excellent resistant against wide range of chemicals except hydrofluoric acid, high abrasion resistance, low wearing properties, High Thermal resistant to sudden change in temperature AREA OF APPLICATION: Chemical Analysis (Average) Acid and Alkali Storage Tank Farms Demineralization plants and Water treatment plants Chimney inside lining, FGD linings Towers and Columns Process Vessels and Tanks Sewerage Treatment Plants and Lines Industrial Flooring and Bund Areas Chimney and Flue Gas Linings Hoppers and Chutes SiO266.4 Al2 0324 TiO21.1 Fe2 O31.1 K2 O + Na2 O2.5 NOT RECOMMENDED: HF acid or other fluoride solutions Heavy thermal shock Typical Physical Properties of GANESHAS Acid and Chemical Resistant Brick Characteristic RED SHALE ACID RESISTANT BRICK Test Standard Bulk Density, gm/cc - 2.3 to 2.35 ASTM C-20 -Water Absorption, % - 0.1 to 1.5 IS 4860-1968 Apparent Porosity, % -0.5 to 1.75 S 4860 Acid Solubility (H2SO4), Loss in Mass,% -0.1 to 1.8 ASTM C-279 Modulus of Rupture, PSI -2133 to 3555 ASTM C-67 Compressive Strength, Kg/cm2 - 700-900 IS 4860-1968 Abrasion Resistant , Volume in mm3 -69 to 85 EN 102 Surface Hardness, MOHS Scale - 7
PRODUCT DATA SHEET ACID RESISTANT BRICK Material : FIRECLAY Type Acid Resistant Brick Size (mm) : 230 (LENGTH) X 115 (WIDTH) X 100,76,65,50,40,38,30,25 (THICK) Specification : ASTM C279, ASTM C410, IS 4860-1982 DESCRIPTION : * We offer premium quality acid resistant bricks Red â?? Shale , tiles and special shapes. We also offer customized sizes as per clients' requirements. Our acid bricks comply with ASTM C279 Type-III, ASTM C410 Type H, L, and Indian Standard 4860 - 1982 Class-I for all applications where low absorption and high acid resistance is required. FEATURES OF ACID RESISTANT BRICK: * Excellent resistant against wide range of chemicals except hydrofluoric acid, high abrasion resistance, low wearing properties, High Thermal resistant to sudden change in temperature AREA OF APPLICATION: Chemical Analysis (Average) Acid and Alkali Storage Tank Farms Demineralization plants and Water treatment plants Chimney inside lining, FGD linings Towers and Columns Process Vessels and Tanks Sewerage Treatment Plants and Lines Industrial Flooring and Bund Areas Chimney and Flue Gas Linings Hoppers and Chutes SiO266.4 Al2 0324 TiO21.1 Fe2 O31.1 K2 O + Na2 O2.5 NOT RECOMMENDED: HF acid or other fluoride solutions - Heavy thermal shock Characteristic Fireclay Type Acid Resistant Brick - Test Standard Bulk Density, lbs/ft3 - 2.25 to 2.30 ASTM C-20 Water Absorption, % - 0.1 to 1.8 ASTM C-20 Apparent Porosity, % - 4.05 to 4.14 ASTM C-20 Acid Solubility (H2SO4), Loss in Mass,% - 6.1 to 6.8 ASTM C-279 Modulus of Rupture, Mpa - 14.6 ASTM C-67 Compressive Strength, PSI - 15500 to 17250 ASTM C-67 Abrasion Resistant , Volume in mm3 - 71 to 96 EN 102 Surface Hardness, MOHS Scale - 7 Thermal Conductivity, BTU-in/hr-ft-F - 6.94 to 7.12 ASTM C-236 Thermal Expansion Coefficient,in/in/Fx10-6 - 2.6 to 2.8 EN 103
Terra Red Slate Color Red Thickness 10-20 mm Water Absorption 0.1-0.6% Material Slate Stone Finish Polished Hardness 6 to 7 on Moh's Scale Density 2.6 to 2.8 Kg/cm3 Compressive Strength 140 to 210 N/mm2 Modulus of Rupture 15 to 25 N/mm2 Average Wear Less than 1% Porosity Quite low Weather Impact Resistant Product Description We are Suppliers and exporters of Terra Red Slate Natural Slate Stone. Surface Finish: Natural, Sawn, Honed, Polished, Sandblasted, Leather finish. Here it should be noted that some varieties yield appealing results in certain finishes only. Hence the choice of finish should be made cautiously. Slabs Dimensions: Length Range 60cm to 150cm Width Range 30cm to 60cm Thickness Range 20mm to 50mm Here it should be noted that slabs are available only in few colors. Tiles Dimensions: 30x30, 40x40, 60x30, 60x60cm or any cut to size.Thickness Range of 10mm to 30mm. Edges: Machine cut, Chamfer, Pencil Edge, Half bullnose, Full bullnose, Rebated Bullnose. Customization: We do undertake custom orders of any combination of color, finish, size, thickness, edge profile, etc. Physically, commercial granites are Hard, Compact rocks with fine to coarse grains of metamorphic or igneous origin. Chemically, they are igneous/metamorphic rocks composed of quartz, feldspar & ferromagnesian minerals like kryolite, chlorite, garnet, etc. A typical granite will have the following chemical composition: Silica (SiO2) 70-75% Al2O3 10-15% CaO+MgO Less than 0.5% FeO + Fe2O3 2-4% Alkalies 4-6% TiO2 Less than 0.5% Loss On Ignition (LOI) Less than 0.5%
1.Low thermal conductivity, 2.Good thermal insulation performance. 3.Good integrity with furnace lining Tyical features: High compressive strength in normal temperature, high ability for anti-abrasion during work, low shrinkage degree under high temperature so as to maintaining an integrity of the furnace lining; low apparent porosity, and fe2o3 content to reduce the carbon deposit in the blowhole and avoid the bricks broken in case of expansion; seldom melting point settings shape. Fireclay bricks are divided into different kinds which are mainly as below: (1) normal purpose fireclay bricks (2) fireclay bricks for coke oven (3) fireclay bricks for blast furnace (4) fireclay bricks for hot-blast stove (5) glass furnace bottom fireclay blocks (6) lower porosity fireclay bricks. In plastic sheets or in wooden pallets
Description The low Porosity fireclay Bricks are made of super calcined flint clay and calcined bauxite, With high Pressure formed and high temperature sintered. Due to its low apparent porosity, Strong resistance to erosion and high refractoriness under load,They are wildly used in Glass kiln,Blast furnace, Metal mixer Furnace,Hot metal mixer ladle,Coke dry quenching devices , etc. Specifications 1. Low bulk density, low thermal conductivity, good thermal performance. 2. Refractory category allow direct contact of fire, suitable for various atmosphere 3. Good integrity with furnace lining, long service life, easy operation, could be shaped freely
25/50 Kg BAG & 01 Ton Jumbo bag Refractor Castable are heat resistance binding materials which are used in binding Refractory brick lining. Monolithic refractories include refractory castable, refractory mortar, spray mass etc. We offer wide range of refractory castable such as : Conventional Castable Super Castable, Fire crete, HEAT - A Castable, HEAT- K Castable Low & Ultra Low cement Castable MON -45, MON-60, MON-70, MON-80, MON-90 Gunning Castable MONGUN-45, MONGUN-60, MONGUN-70 Insulating Castable INSUCAT-9, INSUCAT-11, INSUCAST-13, INSUCAST-15
