Technical Features of GK600 series
Power input Rated voltage 3-phase AC220V/AC230V/AC380V/AC400V/AC415V/AC440V/AC460V/AC480V
1-phase
AC220V/AC230V
Rated input current See Section 2.3 in user manual
Frequency 50Hz/60Hz, acceptable fluctuation range ¡¨¤5%
Allowable range of voltage Continuous voltage fluctuation ¡¨¤10%, short fluctuation -15%~+10%, i.e. 323V~528V;
Voltage out-of-balance rate <3%, distortion rate as per the requirements of IEC61800-2
Power output Standard applicable motor (kW) See Section 2.3 in user manual
Rated current (A) See Section 2.3 in user manual
Output voltage (V) 3-phase: 0~ rated input voltage, Bias < ¡¨¤3%
Output frequency (Hz) 0.00~ 600.00Hz; unit: 0.01Hz
Overload capacity 150% - 1min; 180% - 10s; 200% - 0.5s once per 10 minutes
Operation characteristics Control mode V/f control
Sensor-less vector control without PG 1
Sensor-less vector control without PG 2
Range of speed regulation 1:100 ( V/f control, sensor-less vector control without PG 1)
1:200 (sensor-less vector control without PG 2)
Speed accuracy ¡¨¤0.5% (V/f control)
¡¨¤0.2% (sensor-less vector control without PG 1 & 2)
Speed fluctuation ¡¨¤0.3% (sensor-less vector control without PG 1 & 2)
Torque response < 10ms (sensor-less vector control without PG 1 & 2)
Starting torque 0.5Hz: 180% (V/f control, sensor-less vector control without PG 1)
0.25Hz: 180% (sensor-less vector control without PG 2)
Basic functions Start frequency 0.00~ 600.00Hz
Acceleration/deceleration time 0.00~60000s
Carrier frequency 0.7kHz~16kHz
Frequency command source Digital command + operating panel ¡Ä/¡Å
Digital command + terminal UP/DOWN
Communication
Analog command (AI1/AI2/EAI)
Terminal pulse command
Motor Started method Started from starting frequency
DC braking and then started
Speed search then started smoothly
Motor Stopped method Ramp to stop
Coast to stop
Ramp stop + DC brake
Basic functions Dynamic brake capacity Brake unit action voltage: 650V~750V; service time: 0.0~100.0s; brake unit for GK600-4T45G/55L or below could be internally mounted
DC brake capacity DC brake start frequency: 0.00~600.00Hz
DC brake current: 0.0~100.0%
DC brake time: 0.0~30.00s
Input terminals Six digital input terminals (can be extended to 7), one of which can be used for high-speed pulse input. Compatible with active open collectors NPN, PNP and dry contact input
Two analog input terminals, one of which is voltage/current programmable, and the other is voltage only (can be extended to 3; extension terminal is voltage/current programmable)
Output terminal One high-speed pulse output terminal, 0~50kHz square wave signal output; can output signals such as setting frequency and output frequency. etc
One digital output terminal
One relay output terminal (can be extended to 2)
One analog output terminal (can be extended to 2), voltage/current output optional; can output signals such as setting frequency and output frequency, etc
Characteristics Parameter copy, parameter backup, common DC bus, free switching between two motors¡¡¥ parameters, flexible function code displayed & hidden, various main & auxiliary command and switchover, speed searching, a variety of acceleration/deceleration curves optional, automatic correction of analog value, mechanical brake control, 16-step speed control programmable (2-step speed supports flexible frequency command), swing frequency control programmable, fixed-length control, counting function, three faults recorded, over excitation braking, over voltage stall prevention, under voltage stall prevention, restart upon power off, hopping frequency, frequency binding, free switching between four sections of acceleration/deceleration time, motor thermal protection, flexible fan control, process PID control, simple PLC, flexible multi-functional key setting, droop control, parameter identification, weak magnetic control, high-precision torque restraint, V/f separated control
Protection function Refer to Chapter VII - Fault Diagnosis and Abnormity Handling
Environment Place of operation Indoors, no direct sunlight, free from dust, corrosive gases, flammable gases, oil mist, water vapor, water drip or salt content etc.
Altitude 0~2000m
Derating is required where altitude is more than 1,000m; each increase of 100m in height corresponds to a decrease in rated output current by 1%
Ambient temperature -10¡ãC~50¡ãC
Humidity 5~95%, condensation not allowed
Vibration Less than 5.9m/s2 (0.6g)
Storage temperature -40¡ãC~+70¡ãC
Others
Efficiency Rated power
7.5kW and below: ¡Y93%
11~ 45kW: ¡Y 95% 55kW and higher: ¡Y98%
Installation mode Wall-mounted
Protection level IP20
Cooling mode Forced air cooling
Country of Origin: China (Mainland) Guangdong
Brand: GTAKE
Model: as type
Output power: other
0.4KW-800KW
Output type: Triple
Size: as model
Weight: as model
Input voltage :208V/220V/230V/380V/400V/415V/440V/460V/480V
Output: 0-rated input voltage
Type: AC/AC, or DC/AC inverters
Output frequency: 0.00-600.00Hz
Output current: as model
Input terminals: DI-7(HDI-1), AI-3 0~10V, or 0-20mA
Output terminals: DO-2(HDO-1), RO-2, AO-2
Certificate: CE, GOST
Applying motor: Asynchronous motor and synchronous motor
Cooling: Air cooling
IP grade: IP20
Input voltage: AC, or DC
Frequency command source:Keypad, terminals, communication
Communication: Modbus, Profibus-DP, CANopen, CAN
Control technique: V/f, SVC1, SVC2
Place of Origin:Guangdong, China Brand Name:Rawsun Model Number:RAD2330 Type:Synchronous Motor Phase:three-phase Certification:ce Protect Feature:waterproof IP Grade:67 Motor Rated (Kw):75 Motor Peak (Kw):120 Rated Torque (Nm):350 Peak Torque (Nm):850 Transmission ratio:2 Gear AMT
Warranty: 12 months Model Number: RAD16000 Type: Synchronous Motor Phase: Three-phase Protect Feature: Waterproof AC Voltage: 576VDC Efficiency: - name: NEW 16360Nm 300kw electric ac motor ev drive car kit Motor Type: PMSM motor rated: 180kw motor peak: 300kw rated torque: 850Nm peak torque: 1950Nm peak speed: 3500rpm Transmission ratio: 4 Gear AMT Protection level: IP67 Cooling method: Liquid Cooling
Place of Origin:Guangdong, China Brand Name:Rawsun Model Number:RMHD4500 Type:Synchronous Motor Phase:three-phase Certification:ce Protect Feature:IP67 Cooling type:water Motor Type:PMSM Motor Rated (Kw):65/130 Motor Peak (Kw):115/220 Rated Torque (Nm):465/1300 Peak Torque (Nm):925/2850 Transmission ratio:2-gear AMT (1.35, 1)
Place of Origin:Guangdong, China Brand Name:Rawsun Model Number:RMHD2400 Type:Synchronous Motor Phase:three-phase Certification:ce Protect Feature:IP67 Cooling type:water Motor Type:PMSM Motor Rated (Kw):100/90 Motor Peak (Kw):180/150 Rated Torque (Nm):260/950 Peak Torque (Nm):450/2100 Transmission ratio:Reduction gearbox
Place of Origin:Guangdong, China Brand Name:Rawsuns Model Number:READ40000Z Type:Synchronous Motor Frequency:200Hz Phase:three-phase Certification:CCC, ce Protect Feature:waterproof AC Voltage:208-230 / 240 V Efficiency:IE 2 Rated Voltage:125kw Peak Voltage:180kw Rated Torque:350 Nm Peak Torque:750 Nm Ratio:53/17 Max Speed:10000 rpm
Place of Origin:Guangdong, China Brand Name:rawsuns Model Number:RDD2800 motor and inverter Type:Synchronous Motor Phase:three-phase Certification:ce Protect Feature:IP67 AC Voltage:336/540/576VDC Efficiency:90% rated power:100kw peak power:200kw rated torque:1200Nm peak torque:2800Nm max speed:2600rpm
Gtake brand inverter are good alternative ABB'S ACS550 AND ACS800, the features below: 1.Adopt ti's dsp, and infineon's 4th generation igbt module. 2.Two expansion ports for pg cards for ABZ , UVW, resolver encoder. 3.Thick three-proofing lacquer coated for bad working condition. 4.Main and auxiliary settings and switch over. 5.V/f separated control mode, the output voltage and frequency can be set separately. It's helpful for the variable frequency power supply and torque motor application. 6.Parameter copying(upload and download) function 7.Two sets of motor parameters could be configured, easily run two motor alternately by the control panel. 8. Under vector control with pg, running zero-servo, main axis position control, feed-forward control, pulse serial position control and other position control. 9.Torque control upon the open-loop vector mode and the close-loop vector mode 10.Used for induction motor, servo motor, pmsm and industry particular motor 11.Pg feedback mode: ABZ encoder, uvw encoder, resolver 12.Servo control: main axis orientation control, simple feed forward control, pulse train position control 13.Load distribution function Gk600 technical specifications Rated voltage 3-phase ac380v/ac400v/ac415v/ac440v/ac460v/ac480v Frequency 50hz/60hz, fluctuation range5% Allowable range of voltage Continuous voltage fluctuation 10%, short fluctuation -15%~+10%, i.E. 323v~528v; Voltage out-of-balance rate Cardboard box, plywood carton
Panasonic minas servo motors are amongst the highest performance motors in the world. The product line-up offers a motor suitable for most high performance applications. Package wight:6.5kg (13.228lb.) Package size: 35cm x 30cm x 25cm (13.78in x 11.81in x 9.84in)
Supplier: AC motor drive, automation control machines
