A:brief description:
Dshd-6536c low-temperature distillation tester is designed and made as per standards gb/t6536 test method for distillation characteristics of petroleum products and astm d86.
Has the function of determine the distillation characteristics of gasoline, aviation gasoline, jet fuels, special boiling point solvent, similar petroleum products.
B: main technical features: 1.The electrics parts are controlled by controlling case. 2.The controlling case is made of cold rolled steel. It has an observation window and a built-in furnace. The electric part is at the lower section of the controlling case. 3.The furnace part is composed of sic furnace base, heater of 1000w/220v, and sic plate. The position of furnace can be adjusted by rotating the up and down knob on the controlling case, so that you can adjust the relative position of distillation flask and the opening of condensation tube. The heating power can be adjusted by rotating the voltage adjusting knob. 4.The refrigeration bath is made of stainless steel. It contains heating device, refrigeration device, temperature measuring device and stirring device. The stirring device is driven by a motor. 5.The dimension of condensation tube complies with gb/t6536.
Wooden case
MOQ: 10,000 Barrels per Month Supply Ability: 1,000,000 Barrels per Month JP54 Technical Specifications: ADDITIVES Antioxidant in hydro processed fuel mg/l min 17 max 24 Antioxidant non hydro processed fuel mg/l max 24 Static dissipater first doping ASA- 3 mg/l max 1 Stadis 450 mg/l max 3 COMBUSTION PROPERTIES Specific energy, net mi/kg min 18.4 D 4808 Smoke point mm min 19 D 1322 Lumininomitter number min 45 D 1740 Naphtales % vol max 3 D 1840 Propriety unit min max result test ip method ASTM COMPOSITION Total acidity mg KOH /g max 0.01 354 D 3242 Aromatic % vol max 22.0 158 D 1318 Sulphur, total % mass max 0.30 107 D 1266/2622 Sulphur mercaptan % mass max 0.003 342 D 3227 Doctor test 30 D 4952 VOLATILITY Initial boiling point centigrade max report 123 D 96 10% vol at C 240 20% vol at C report 50% vol at C report 80% vol at C report End point centigrade max 42 170/303 D 56 / 3828 Density at 15 C kg m2 min /max 776/840 180/385 D 1298 LOW TEMPERATURES PROPERTIES freezing point centigrade max 40 15 D 1298 Corrosion copper (2hrs at 100 C) Corrosion silver (4 hrs at 500C) max 1 227 STABILITY Thermal stability control temp. 280C 323 Filter pressure, differential mm. Hg max 25 Tube deposit rating (visual) max
Technical Data Sheet Property Average Value Gravity@15.6oc : 0.859 Max SPI: 33.45 Sulphur: 1.2-1.5 Max Water & Sediment Content: 0.2 Max Water Content: 0.1 Max Salt Content: 8 Max Carbon Residue: 4 Max Reid Vapour Pressure: 0 Pour Point: 0.35 Ash: 0 Asphalt : 1 Max ASTM Stabilized Gravity: Degree 3.7 Recovery @50oc: 0.8 Min @100oc: 8 @200oc: 28 @250oc: 37 @300oc: 47 Total Distillate: 47 Total Residue: 2.5Max
Bitumen Primer * Bitumen Primer is Bituminous air curing ready mixed Acid & Alkali resistant special primer. Application * Concrete surface must be clean, dry and rough. No primer should be applied over smooth and wet surface. * After cleaning the concrete surface, one coat of Bitumen Primer should be applied with brush and allow to dry thoroughly. * The drying time will depend upon the temperature. * 24 Month at the temperature 30C (+2OC) Packing * Bitumen Primer: 25 Liter Drum Note * Bitumen Primer contains volatile and slightly toxic solvent. Keep away from spark and open flames at working area. * Bitumen premier it is manufactured using bitumen solution which is used for sealing of prime porous and non-porous surface, and also to protect residential and commercial building. * Bitumen Primer is used to protect substrate against corrosive attack, is suggested to apply anti-corrosive primer.It is best for protection against sub-striate against atmospheric corrosion and chemical corrosion. It is a mixed substance made up of organic liquids that are highly sticky, water proof, viscous,acid proof as with all surface coating, good Bitumen Premier is used for long life of the system. it is applied by brush or roller and allowed to dry before any water proofing treatment so to avoid solvent it is used in defects such as cracks, broken mortar joints, etc. are to be repaired prior to Bitumen primer application. Product Details: Grade Standard Technical Grade Physical State - Liquid Usage - Industrial Color - Black Characteristics: Appearance/Color - Pasty liquid/ black Chemical Base - Bituminous rubber emulsion. Density - 1.0 kg/l Curing Speed/ Rate - 3 - 4 hours Tack free after - 5 - 10 hours Cured after - 2 - 4 days (Dependent on ambient Solid Content by - temperature, substrate temperature, Weight - relative Water Content by weight - humidity and thickness of the coating) Bitumen Content - 41% by weight - Thixotropic (The viscosity can be adjusted by - Viscosity adding up to max. 5% of clean water. - Stir well prior use) - For light protection: 1.0 mm min. Coating - For greater protection: ~ 1.5 - 2.0 mm Thickness applied - in two coats. Water Penetration - 48 h, 1 bar: 78.5 cm2: 0 ml under Hydrostatic - 96 h, 4 bar: 78.5 cm2: 33 ml Pressure - Water vapor 6 x 10-7 mg / hmPa Permeability Service - -30 C to 200 C Temperature - Adhesion Concrete - Very good, Timber: Very good, Metal: Moderate Glass: Poor
TYPICAL PROPERTIES Sr. Property Units Specs. Test Methods 1 Kinematic Viscosity @ 100 C cSt 2.5 - 2.8 ASTM D-445 2 Kinematic Viscosity @ 40 C cSt 6.0 -9.0 ASTM D-445 3 Density @ 15 C Kg/m3 830-840 ASTM D-7042 4 Flash Point, ,COC, Min. C 140 ASTM D-92 5 Sulphur Content, Max. ppm wt.% 15 ASTM D-4294 6 Color- Max - 1.0 ASTM D-1500 7 Appearance - C & B Visual 8 Distillation Range, IBP, Min. C 250 ASTM D-86 9 Distillation Range, FBP, Min.C 380 ASTM D-86 Base oil SN50, the base stocks has become the most widely used base oil in Middle East and Asia. It is the workhouse ingredient for formulators and blenders of lubricants for assengers and commercial vehicles, as well as industrials applications. Applications: superior quality component for automotive and industrial applications. Safety & Handling: It is stable in ambient conditions, non-corrosive and it can be stored in mild steel containers. The product is practically non-irritating to skin and eyes. Packing: Bulk, IBC Tank, Flexi Tank, New and Re-Conditioned Drums. Features and benefits: Consistency in formulation Market general packages with a range of additives Superior supply chain / delivery logistics
Clear Solvent Low Aromatic Industrial White Spirit at Least Price Application: * High Quality Clear Solvent Low aromatic Industrial White Spirit: * Low aromatic White Spirit * White Spirit Product Name White Spirit Appearance Clear Liquid free from suspended matter Viscosity 0.4 - 0.5 Cps. Color Water White Sp.Gravity at 20C 0.775 Flash Point 42 C. Distillation Range 153 C. - 237 C. Dry Point 237 C. Aromatic Value 15-17% KB Value 38% by weight Sulphur Content < 5 ppm Acidity Content Nil Corrosion None Water Content Nil
Low aromatic Industrial White Spirit Industrial White Spirit / Low Aromatic White Spirit Industrial White Spirit White Spirit Mixtures Solvent Thinner for Paints and Varnishes Industry White spirit 1. Competitive price 2. Fast deliver 3. Good quality 4. More application 5. Liquid Coating 1. Product: White Spirit 2. Appearance: Liquid 3. Color: Clear 4. Aromatic Value: 15 - 17% 5. Viscosity: 0.4 - 0.5 Cps High Quality Clear Solvent Low aromatic Industrial White Spirit: Low aromatic White Spirit White Spirit Appearance: Clear Liquid free from suspended matter Viscosity: 0.4 0.5 Cps. Color: Water White Sp. Gravity at 20�º C: 0.775 Flash Point: 42 �º C. Distillation Range: 153 �º C. - 237 �º C. Dry Point: 237 �º C. Aromatic Value: 15 17% KB Value: 38% by weight Sulphur Content: < 5 ppm Acidity Content: Nil Corrosion: None Water Content: Nil
Supplier: Sugar [ icumsa ] only moq 50,000mt, various fuels [a1 jet, en 590 ultra low sulfur diesel & d6 low pour diesel]
Supplier: Petrochemical products, petrochemical equipment, polypropylene, lldpe , hdpe, urea 46%(granular/prilled)
bitumen vg 40 , petroleum bitumen, fuel cst 380, rpo, lubricants motor oils (low to medium tier) grease (calcium nlgi 3) green rubber, crude oil ,base oil , gas oil , granule sulfur, methanol, acid acetic , meg, deg, teg, peg, mea, dea, tea, dpg .lab .hab
Services: Logistics and supply chain
Buyer: Japanese & korean passenger car tires, plane tires, cocoa powder in bulk in low price, coffee powder in bulk in low price, vanillin powder, vanilla powder,
High Quality Clear Solvent Low aromatic Industrial White Spirit: * Low aromatic White Spirit * White Spirit Appearance: Clear Liquid free from suspended matter Viscosity: 0.4 -0.5 Cps. Color: Water White Sp.Gravity at 20C: 0.775 Flash Point: 42 C. Distillation Range: 153 C. - 237 C. Dry Point: 237C. Aromatic Value: 15-17% KB Value: 38% by weight Sulphur Content: < 5 ppm Acidity Content: Nil Corrosion: None Water Content: Nil