Why purify transformer oil? Maybe the first question should be, ¡°why is it important to have purified oil in a transformer?¡± Dissolved gasses in transformer oil can cause arcing, corona discharges, and overheating--reducing the electrical efficiency and lifetime of the transformer. Likewise, water contamination at levels as low as 30 ppm (parts per million) can adversely affect the insulating strength of the oil. With ever-increasing standards for energy efficiency of power distribution transformers, the need to effectively degas will become even more important in the future. particles contamination will also affect the function of insulating oil. So we need to clean used transformer oil.
Features:
1. Besides the common vacuum oil purifier's function of dewatering, degassing and eliminating particles, this machine can regenerate the seriously deteriorated oil by removing the polarity materials, such as the deep oxides, free carbon in the oil effectively. It can make the seriously deteriorated oil reach to the normal index like anti-oxides, acid-alkali water-solubility.
2. Operational can be P.L.C (Programmable Logic Controller).
3. Unique vacuum dehydration, degassifier, regeneration system, adopt stereo-evaporation technology, high efficiently remove water, gas, particles from transformer oil, improve oil quality and dielectric strength.
4. Duplex 3D stereo-evaporation, eliminating the liquid water quickly
5. UK g technology by which the trace water that is show chain, such as dissolved water, can be removed effectively.
6. Instinctive removing impurities system filtering through double FH trapezoidal network and absorbing by high polymer without the mechanical power
7. Advanced infrared liquid-level automatic control system to accomplish fully automatic control.
8. Specially applied to vacuum oiling and drying for power transmission equipments.
9. The oil of any grades can be treated either on- or off-load.
10. Special oil pump design with lower noise.
11. Special additives for depolarization, can recover oil color of aged transformer oil to new, equipped with flexible unloading device of short time, good efficiency small quality. Discolor under vacuum can save cost of treatment, the waste impurities doesn¡¯t pollute environment (it can be used to architecture and road pave)
Comparing with the single-stage vacuum oil purifier, this machine can dewater, degas and removes the impurities more quickly, more completely, and makes the oil BDV (Breakdown Voltage) of 70kV or higher. As the bridge-type vacuum linking system that can purify and also can be an independent vacuum power supply, this machine can treat the electric insulation devices.
(oil purifier, oil purification, oil filtration, oil recycling, oil treatment, oil regeneration, oil restoration, oil filtering, waste oil disposal, oil reclaiming, waste oil management, energy saving, oil reconditioned, oil reconstituted, oil restituting, oil recovering ,oil filtration, oil filter, petroleum machine)
Package Size:60cm x 25cm x 65cm (23.62in x 9.84in x 25.59in)
Package Weight:40.0kg (88.185lb.)
Unit Type:SET
Supplier: Base oil sn60, 70, 100, 150, 350, 400, 500, 550, 600, 650; jet fuel a1, jp54, crude oil, bitumen 50,60/70, 90/100 & all grades of bitumen, used cooking oil, transformer oil, industrial oil, all types of grease, lng/lpg, used motor or engine oil, all types of motor oil, lubricants, additives and types of petroleum products
BASE Oil-SN 60, 70, 150, 300, 500, 600, 650 & BS 150.
TECHNICAL SPECIFICATION DATA SHEET: PROPERTY TEST ASTM TEST METHOD API @ 60 F 30- 45 ASTM D-1298 Sulfur (wt%) max 0.8 ASTM D-4294 BS &W % max 2.0 Paraffins (vol. %) 40 -70 ASTM D-2789M Naphthenes (vol. %) > 25 ASTM D-2789M Organic Chloride(ppm) < 1.0 ASTM D-4929 Organic Nitrogen max (ppm) 500 ASTM D-4629 Microcarbon Residue (MCRT) 2.0 Max ASTM D-4530 Light ends C2 iC5 5 % Max Total Acid Number, mg KOH 0.8 ASTM D-664 Metals by ICP ASTM D-5708 Vanadium
MOQ: 10,000 Barrels per Month Supply Ability: 1,000,000 Barrels per Month JP54 Technical Specifications: ADDITIVES Antioxidant in hydro processed fuel mg/l min 17 max 24 Antioxidant non hydro processed fuel mg/l max 24 Static dissipater first doping ASA- 3 mg/l max 1 Stadis 450 mg/l max 3 COMBUSTION PROPERTIES Specific energy, net mi/kg min 18.4 D 4808 Smoke point mm min 19 D 1322 Lumininomitter number min 45 D 1740 Naphtales % vol max 3 D 1840 Propriety unit min max result test ip method ASTM COMPOSITION Total acidity mg KOH /g max 0.01 354 D 3242 Aromatic % vol max 22.0 158 D 1318 Sulphur, total % mass max 0.30 107 D 1266/2622 Sulphur mercaptan % mass max 0.003 342 D 3227 Doctor test 30 D 4952 VOLATILITY Initial boiling point centigrade max report 123 D 96 10% vol at C 240 20% vol at C report 50% vol at C report 80% vol at C report End point centigrade max 42 170/303 D 56 / 3828 Density at 15 C kg m2 min /max 776/840 180/385 D 1298 LOW TEMPERATURES PROPERTIES freezing point centigrade max 40 15 D 1298 Corrosion copper (2hrs at 100 C) Corrosion silver (4 hrs at 500C) max 1 227 STABILITY Thermal stability control temp. 280C 323 Filter pressure, differential mm. Hg max 25 Tube deposit rating (visual) max
Used Engine Oil
Transformer oil purifying purifier system is for purifying transformer oil, circuit breaker oil, cable oil, and so on. Wooden case
Supplier: 4cst, 6cst, 8cst, etro4, etro6, naphthenic base oil, equinas 4 group 3 base oil, equinas 6 group 3 base oil, equinas 8 group 3 base oil, equinas tfo 60i high quality inhibited transformer oil, equinas tfo 60u high quality un inhibited transformer oil, drilling fluid, melamine powder, clinker, urea, chemicals, base oils and other petroleum products, industrial salt
Services: Marine transportation and logistics
marine ship and cargo survey and inspections
Enclosed Weather Proof Type High Vacuum Insulation Oil Filtration Unit ,Transformer Oil Purifier with carbon steel cabinet Enclosed Cabinet Type Transformer Oil Filtration Plant Vacuum Transformer Oil Recycle Plant,Oil Separation System, Insulating Oil Filter Machine with carbon steel Housing Cover Weather Proof Outside Use in Raining Enclosed Available -On line use -Functional -Convenient -Easy Move & Oil Fast Cleaning This oil purifier is a maintenance system for transformers and Transformer oil. ZYD transformer oil filter can keep transformers and transformer oil in a normal and good running condition. So that to save the new oil cost and transformers replacement cos Application: This oil purification plant is applied to filter various of unqualified insulation oils including aging transformer oil, insulation oil, specially for the power which is above 110KV, mutual inductor oil, switch oil and so on. Also it can inject the insulating oil into the transformers on-line. Features: 1. Double-stage High Vacuum dehydration and degassing and removing impurities from the used transformer oil. 2. Eliminate acidity, sludge, free carbon, discoloration elements, and other soluble matters in the oil, which decays the transformer. 3. It can vacuum filling oil to transformers, and it can vacuum dry transformers and on-line operation with transformer. 4. The standard ZYD system is designed for purifying and filtering oils in workshops, in storage tanks or directly in transformers (energized or de-energized transformers). The oil technical data after treatment: 1. Gas content is less than 0.1% 2. Impurity size is less than 1m without free carbon 3. Water content is less than 3 part per million 3. Oil dielectric strength (breakdown voltage) is more than 75KV 4. Acidity value is less than 0.01 mg KOH/g 5. Dielectric loss factors at 90°C is less than 0.001
1. Mobile (trailer) type, completely closed structure, waterproof, dustproof, move easy. 2. Installation of car tyres, bridge shock absorber, braking system and steel welding of entire trailer guarantee 60km/h speed. 3. Dealing with unqualified insulating oils, rapidly remove water, gas, particles from oil. Wooden case.
