The type PC42 is an aluminium single point load cell with an improved potting.
Application
Retail scales, bench scales and conveyor scales
Key Features
Wide range of capacities from 5 kg to 200 kg
Aluminium construction
Environmental Protection IP67
Maximum platform size up to 400 x 400 mm
Integral mounting spacer.
Other Information
Delivery Time: 2-3weeks
Single point load cell - PC12. The type PC42 is an aluminium single point load cell with an improved potting. Application Retail scales, bench scales and conveyor scales Key Features * Wide range of capacities from 5 kg to 200 kg * Aluminium construction * Environmental Protection IP67 * Maximum platform size up to 400 x 400 mm * Integral mounting spacer. Other Information Delivery Time: 2-3weeks
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
VHCS Single cell VITZROCELL's EDLC is a next-generation energy storage device that offers a high energy density and can be used semi-permanently. Features - Very Low ESR(High-power density) - High Operating Temperature - RoHS, UL, IATF 16949, AEC Q200(Grade 3) Compliant -Cylindrical cell -Radial Lead/ Snap-in terminals
VSCS Single cell VITZROCELL's EDLC is a next-generation energy storage device that offers a high energy density and can be used semi-permanently. Features - Very Low ESR(High-power density) - High Capacitance - RoHS, UL, IATF 16949 Compliant - Cylindrical cell - Radial Lead/ Snap-in terminals
Currently, MAXGTECH provides many different designs in its Load Cell product line. These products are mostly used in the Automotive, Aerospace, and Automated Industry where endurance and safety testing are critical. Other Information Delivery Time: 2-3weeks
Application :- These single core flexible cables are used for wiring in control panels, machines and various electrical installations In small, medium and large industries. Features :- Manufactured from bright annealed 99.97% pure bare copper conductors, these cables have low conductor resistance. These wires are insulated with a special grade PVC compound formulated and manufactured in-house which is impervious to water, oil, grease, acids, etc. and are tough to protect from any mechanical abuses. Technical Data :- Working Voltage : Up to 1100 V Temperature Range : -15�°C to +70�°C Sizes : 0.50 to 50.00 Sq. mm with ISI mark & 70.0 to 40.0 Sq. mm generally conforming to IS:694 Color Codes : Red, Yellow, Blue, Black, Grey, White, Pink, Green, Violet, Brown, Orange Specification : IS:694 Packing : In 90 meter coils, higher sizes in drums.
RG-6+2/3 Core
RG-59+2/3 Core
6+1 Cables
