Gold Pinning Dredger

TypeYs-350 Total length 36.6m Hull length26m Hull depth1.8m Hull width6m Main power1000kw Pump model 16/14g-gh Suction pump dia400mm Discharge pump dia350mm Water flow3000m3h Dredging depth14m Discharge distance1000m Working weight180ton Spuds pile 450mm Winch3sets Delivery time 90days Completely assembled and fully tested before delivery 1)Simple, rapid assembly and dismantling 2)Free for one set of spare parts 3)Responsible for installation and training of operators in the dredging place 4)One-man operate dredger by programmable logic controller ( plc system ) 5)Efficient fuel consumption 6)Spare parts available from stock 7)Transportable by road, rail or sea 8)Airconditioning-vessel standard equipment 9)Wide range of optional equipment available 10)Can be delivered to any location where need dredging 11)Reliable engine capability , dredging pump capability and hydraulic system 12)Fresh water engine cooling system 13)Standard design, allowing early delivery and low price.

Weed-cutting suction dredger ItemParameter Total length13.1m Hull length7.6m Hull width2.9 Hull depth0.75m Mean draft0.4m Cutting width2.2m Carring tonnage4-5t Cruising speed3km/h Main engine75km/h Cruising endurance48hr Sailor2.

Supplier: Sand dredging vessel, gold pinning dredger, mud digging excavator, mineral processing dredger, cutter suction dredger, chain bucket sand dredger, weed-cutting suction dredger, simple jet suction dredger, chain bucket iron powder dredger, magnetic ship, crusher bucket, absorption iron sand vessel, dredging pontoon, dredging pipe, dredging pump, suction tube, dredging rubber

The JLCSD-150 Cutter Suction Dredger of steel construction, non self-propelled, dismountable type, is able to berth and dredge at any waters both in the coastal area and inland rivers, with similar conditions to that in navigation area “A” or below the “A”-line specified in code for inland river steel engineering ship manufacture of P.R.China. The dredger can be used to excavate and transport cohesive sediment below the class ? specified in code for dredging engineering construction technique issued by Ministry of Water Resources(MWR) of P.R.China. In the course of technical designing, we have considered special requirements for local tropical climate conditions such as meteorological and waters distributing state etc. It’s hull consists of a main pontoon and two side pontoons, which is to be easy to dismantle or mount for transportation by road, rail or water, and is to be easy to reassemble at project site.The engines and dredge pump are located in the center pontoon,the 2 side pontoons serve as fuel bunkers,ballast tanks and storage tanks. The dredger is powered by diesel engines. The main diesel engine is to drive the dredge pump, and in the free part of the engine, one set of power distributor is equipped, to supply power for all other equipments such as cutter, swing and ladder winches, and the spud rams etc. The spacious control cabin is ergonomically designed with 360 degree view. All the operation buttons, swifts, indicators, gauges are equipped on the control desk. Only two operators can control all the dredger in the operation room. The dredger is painted by 4 layers of marine paint to protect from the corrosion. The ZINC anode can be used to give better anti-corrosion function.

Supplier: Gold mining machine, sand dredger, gold dredger, sand washer
Services: Shipment, transportation

Supplier: Dredgers, cutter suction dredger, jet suction dredger, bucket chain dredger, mini gold dredger, bucket chain gold dredger, waterweed cutting ship, amphbious multifunction boat, water cleaning boat

1total length (with ladder raised) approx58.50m 2length side pontoons48.0m 3breadth6.40m 4depth2.00m 5main pontoon dimension15.50m * 2.80m * 2.00m 6side pontoon dimension ( in two parts)48.00m * 1.80m * 2.00m 48.00m *1.80m * 2.00m 7mean draught with full bunkers approx1.35m 8minimum dredging depth2.0m 9maximum dredging depth30.0m 10diameter of ladder suction pipe ( onboard)|¦ì550mm 11diameter of discharge pipe ( onboard)|¦ì500mm 12dredge pump production capacity500m3/hr 13cut width @ maximum digging depth33.5m 14cut width @ minimum digging depth42.8m 15discharge distance120m

These dredgers are highly flexible in use. The modular structure and tight design allow the dredgers to work even in shallow river and waterways. Different arrangements of sand pumps and cutters make sure the dredgers can work in different circumstances like sand , stones, mud , etc. In container or bulk ship. Our field engineer will guide to assemble the machine at your working site and train your staff.

Dimensions(L*W*H):26*7.1*2.2 Engine room(m):14*3.5*2.2 Dredging depth¡êo12-14m Water flow¡êo3200m3/h Total power KW¡êo1200KW Dimensions(L*W*H):26*7.1*2.2