I am Beijing Nimble bitumen membrane equipment CO.LT.We are mainly specialized in research,development and manufacture of equipment for bitumen membrane.Our company was established in 1991.It acts as the leading supplier of equipment for bitumen membrane in China, and a newborn force in international equipment industry for bitumen membrane.Beijing Nimble waterproofing membrane Corporation had focused on offering quality goods and on-time service,We can according to customer requirement to produce different types equipment from the small equipment to ten million ©O . Until now, we had served hundreds of customer from more than 10 countries in the world. Our equipment has exported to India,Russia,UKrine,Saudi Arabia ,North Korea,and We have a branch company In India now.
ART 1 General information
Technical parameters
1Production capacity: annual production of modified bitumen membranes of 3 million Sqm (16 hours/day, 300days/year with two shifts)
Reinforcement: Polyester, Glass fibre
Modified materials : SBS, APP
4Materials for surface: sand, scraps of stone, PE membrane, aluminum foil, etc.
5Specification of products: Width: 1m, thickness: 2-5mm, length: 7.5 or 10m
6Production speed: 0-20m/min¡£
7Main workshop: 60¡Á (12-15) ¡Á£¨6-8£©m
Labor required
5-7 workers are needed for the whole production line
Boiler room: 2workers
Modified workshop: 1-2 workers
Production workshop: 2-3 workers
Utilities
Electricity: Alternating current, 380V50Hz60Hz
Water Consumption: 2-3 T/D
RECEMIX 2K grey ( 2 component semi elastic waterproofing material ) RECEFLEX 2K grey ( 2 component ultra flexible waterproofing material ) RECEFLEX 2K white ( 2 component ultra flexible waterproofing material )
This kind of waterproof coiled material is made in the following way: base materials are firstly dipped into asphalt or thermoplastic elastomer (e.g. SBS), thermoplastics (e.g. APP or APAO) and modifiedasphalt; then both surfaces are coated with elastomer or plastic asphalt; fine sands and mineral grains (pieces) or polyethylene memb ranes are spread or covered on its upper surface; fine sands or polyethylene membranes are spread or covered on its lower surface. Product Feature * It has good waterproofing and ageing-resistance function; * Not flowing at highest temerature and no crack at lowest temperautre; * Easy application, no pullution; * Long service life; Matters need attention * no construction shall be allowed on rainy, snowy or windy days above grade 5; * construction site and personnel safety protection facilities are complete, fire fighting equipment is effective and placed according to regulations;
Specifications 1.odorless 2.low VOC 3.antimicrobial 4. mildew resistant 5.environmentally friendly 6.waterproof 7.Scrub resistance Description It is an enhanced mildew proof product adopting nano-scale Ag+ antimicrobial and mildew proof technology, integrating odorless formula, with fresh product smell, smooth paint film, durable and beautiful paint.As an affordable and environmentally friendly product with excellent decorative performance, it is characterized by fresh smell, environmental health, strong covering power, large painting area, convenient constructionapplication, short constructionapplication period, etc. Specification Data Solvent: Water Pigment: Non-lead pigment Theoretical Solids By Volume: more than 50% Theoretical Coverage: Theoretically 1 litre of this product covers 12 sqm in 1 coat Coverage varies considerably depending on application methods and surface roughness and porosity. Shelf Life: Minimum 12 months at 77F(25C) unopened and store in cool and dry places. Recommended Film Thickness: Wet: 80 micron Dry: 30 micron Dry Time: At 77F (25C) and 50% R.H. to recoat Touch Dry: 1 hours Recoat : 2-3 hours Application: Brush, Roll, conventional spray or Airless Spray. Thinner: Thin up 15% depend on different application methods & temperature. Do not over thin by adding more than 30% water. Brush or Roller: For sealing new or bare surfaces thin with up to 1 part of clean water to 5-10 parts of paint(10%-20%) Conventional Spray: Add up to 1 part clean water to 5 parts paint(20%) Airless spray: do not thin Clean-up: Clean up equipment with water Typical painting system Substrate System All kinds of Wall surfaces 1.Alkali Resistance Primer (1 coat) 2.Emulsion Wall Paint (2 coats)
1.Brand name jianda Surface pe, s, m Size 1mx10m, 1mx8m Fetus: composite tires or polyester With one side adhesive side pe film as a benchmark, can customize the double-sided adhesive/sand shale surface/aluminum foil/face/colour sand surface Type 2: standard: gb/t23441-2009 Low tender degrees: - 20 or 25 Body: polyester tire Thickness of 1.5 mm at least Packed in rolls with pallet/ or as per clients' requirement
It uses high-quality butimen with SBS thermoplastic elastomer as modification additive and prepared by special technology. There is reinforcment in the middle and covered with various surface materials. Advantage: 1. Excellent low temperature resistance. 2. High tensile strength and elongation. 3. Excellent tear, corrosion and weather resistance. 4. Hot melt construction with reliable and durable seams. Application: Waterproof and moisture proof works for roof and underground space of various buildings. Specification: 1. Thickness: 3/4/5mm 2. Width: 1000/2000mm 3. Length: 10/15m
The elastomeric SBS modified asphalt waterproof rolling material is made of styrene butadiene-styrene rubber modified asphalt as coating. It is made of glass fiber felt, polyester felt and glass fiber reinforced polyester felt as the tread material. Features: Strong impervious performance and good anti-aging ability Acid and alkali resistant, with a service life of 30 years Good endurance climate capability Can be used in low temperature environments with long life High tensile strength, high elongation, good dimensional stability
TJ 441 Self-Adhered Polymer Modified Bitumen Waterproof Membrane is based on SBS elastmoeric modified waterproof membrane,laminating with a special PET film,which can be categorized into two types--N and PY. N has PE(Polyethylene),PET,and D(Non-PET film with adhesion in double side);PY has PE,S(sand),AL(Aluminum Foil),D;Its characteristics lie in suitable for wet substrate,no need to find flat substrate and painted surface disposal,free torch heat,integrating with the mortar or concrete perfectly. It's safe and environmental protection. Features: Supreme adhesion integrates with the substrate forever with special patent formula Suitable for various substrates enables to lower resource waste massively and save the cost and time Unique operation craft of wet treatment,free from primer,no need of heat melt Size Available Width-3.28ftï¼?1m Length-32.8ft(10m) 49.2ft(15m)65.6ft(20m) Thickness- N(1.2mm,1.5mm,2mm) G (2mm,3mm,4mm) Packaging,storage and shipping Product is packed into rolls with plastic woven bag Avoid sunlight and rain,store it under current and dry. The temperature should lower than 50 ,putting it upright and keep the story less than 2 TJ-789 TPO Waterproof Membrane TPO Waterproof Membrane takes TPO elastomer as base material,adding fire retardant filling,anti weathering pigment filling,anti oxidization agent and light stabilizer,through high speed mix,melting extrusion,and calendering into waterproofing sheet material. Firstly developed in the early 20 centuries,it is extensively used for rooftop waterproofing projects under the installation of mechanical fasteners. With the combination of the great anti-weathering of EPDM and the weldability of PVC sheet,it defines the leading position in waterproofing industry TPO waterproof membrane has 0% plasticizer and no chloride,generating zero harmful gas when welding Application: Extensively used for the waterproof projects of industrial and residential buildings and public constructions Installation Guide 1. Substrate Requirements: Clean,no bugle and pointy object 2.Installation Steps(Mechanical Fastener) Substrate Clean Pave PE film Pave Insulation board Pre-applied TPO Mechanical Fasten TPO Hot air Welding TPO Detailed Spots Strengthening Test Check 3. Installation 1) Clean the litters,dust on the substrate 2)Pave a layer of PE film,the overlap uses butyl adhesive tape to glue 3)Pave Extruded polystyrene foam insulation board(XPS),using exclusive fasteners to fasten the board 4)Pre-applied TPO membrane: Lay the TPO membrane on the insulation board in accordance with the snap line,paving direction should be perpendicular with the wave of profiled steel sheet,dispose the loose TOP membrane as the outline on the insulation board. Membrane remains flat and even,overlap is 12cm and appropriate trim is needed 5)Fasten the TPO membrane: Align edge of mark line 30mm install the fasteners and elastics 6)Membrane Overlap: One piece membrane laid on the other,use the automatic hot air welding machine to weld 7) Detailed Spots Strengthening: Trim adequate TPO membrane for detailed spots,use portable hot welding machine weld on the TPO membrane 8)TPO membrane edge treatment: Use batten to fasten the edge along with sealants
Needle-punched Polyester Mat for bitumen waterproof Membrane(230gsm,250gsm,300gsm)is ready,feel free to contact me if you have such requirement.
Needle-punched Polyester Mat for bitumen waterproof Membrane(120gsm,130gsm,140gsm,150gsm,160gsm,170gsm,180gsm 200gsm and so on Specfications of material is ready,feel free to contac me!
