* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements. * The valves are of floating-ball design where the ball moves towards the downstream seat, under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D * Wide portfolio of Side-entry and Top-entry designs * Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH * Firesafe design - to API 607 and API 6FA * CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU, Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required * Double block and bleed (DBB) feature - Valves are designed and tested for automatic * cavity relief * Anti-blowout stem design * Coil springs used for consistent seat loading and lower operating torque * Lip seals provided for low temperature services * Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary) * Wide portfolio of Side-entry and Top-entry designs * Options: Buried service, Cryogenic * Offered with Electric, Pneumatic and Hydraulic Actuators * In-house Tests Capabilities * Fire-safe to ISO 10497 and API 607 * Mirror-finished solid stainless ball * Fine-grained PTFE seats * Cavity Pressure Relief mechanism * Blowout-proof stem * High integrity stem sealing �¢?? Belleville springs compensate for wear and thermal expansions * Size 2" to 56" (50 mm to 1400 mm) * ASME Class Class 150 to 2500 * Design Standard API 6D * Size �¼" to 8" (8 mm to 200 mm) * ASME Class Class 150 to 2500 * Design Standard ISO 17292, API 608, API 6D * Antistatic feature * Actuator-mounting flange conforms to ISO 5211 * Single, two and three piece constructions * Full-bore and regular-bore designs * Soft and metal-seated * Offered in carbon steel, stainless steel and duplex stainless steels * Screwed, socket-weld and flanged ends * ASME classes up to 2500 * Variety of actuation option
Floating ball valve 1. Design: api 6d, ansi b16.34 2. Face to face: api6d, b16.10 3. Flange end: ansi, b16.5 4. Size range: 1/2 - 10" 5. Pressure ratings: ansi 150, 300, 600, 900, 1500; 6. Body materials: wcb, lcb, cf8, cf8m, cf3, cf3m etc. 7. Trim: 13cr, 304ss, 316ss, duplex stainless steel; 8. Full bore and reduced bore 9. Actuations: lever, worm gear Exporting standards case
Bonny Valve has very extended experience in manufacturing of Floating Ball Valves Size ½ inch up to 10 inch (DN 15 up to DN 250) ½" to 10" 150# ½" to 8" 300# ½" to 4" 600# ½" to 1 ½" 900#, 1500# & 2500# Pressure Rating: ASME 150# to 2500# Materials: Carbon Steel, Low Temperature Carbon Steel, Stainless Steel, Duplex Stainless Steel, Super Duplex Stainless Steel, Nickel Alloys, Nickel Aluminum Bronze, Hastelloy, Inconel Etc. Seating: Soft Seated (PTFE/RPTFE /PEEK/NYLON/DEVLON) and Metal Seated End Connection: Flanged RF/RTJ, BW, FNPT & SW Ends Operator: Lever/Wrench, Gear Operated Specification & Standards: Design API 6D / API 608 / BS5351 / ASME B16.34 Face to Face ASME B16.10 End Flange ASME B16.5 BW End ASME B16.25 Test API598/API6D Fire Safe Test â API607/API6FA Special NACE MR-01-75 Features: Two Piece or Three Piece Bore Type Reduced Bore or Full Bore Anti- Static Device Blow- Out Proof Stem Fire Safe Design Low Emission
Applicable Standard Design Standard: API 6D, ASME B16.34, API 608, BS 5351, MSS SP-72 Face to Face: API 6D, ASME B16.10, EN 558 End Connection: ASME B16.5, ASME B16.25 Inspection and Test: API 6D, API 598 Products Range Size: 1/2" ~ 12" (DN15 ~ DN300) Rating: ANSI 150lb, 300lb, 600lb Body Materials: WCB,CF8,CF8M,CF3,CF3M,Duplex 4A,Alloy Steel,Monel,etc Ball&Stem: A105+ENP, F304, F316,F304L,F316L,F51,Monel Seat: PTFE,RPTFE,PEEK,PPL,etc Operation: Lever, Gear, Electric, Pneumatic, Hydraulic Design Features Full port or reduced port Floating ball design Blow out-proof stem Casting body or Forged body Fire safe design to API 607/ API 6FA Anti-static to BS 5351 Cavity pressure self relief Optional locking device
Cast Steel Floating Ball Valves
Brief description of Ball Valve: 1) Size: 1/4~4" 2) Working pressure: 1.6-6.4mPa 3) Temperature range: -29�°C ~ 150�°C ~ 260�°C 4) Suitable medium: water, oil, air, some corrosive liquid 5) Thread type: G, NPT, BSPT, RC,BSP, DIN259/2999 6) We can also manufacture similar products according to your special requirements.
Specification Size: 2~48"(DN50~DN1200) Rating: 150~1500LB(PN16~PN250) Body Materials: CS, SS Product features High precision ball& High tightness seat Long life ball&seat The most economical material combination The best fire safe and static resistance safety Widely applicable Various driving types Product parameter Main material WCB, WCC, LCB, CF8, CF8M, CF3, CF3M, CF8C, 4A, A105, LF2, F304, F316, F304L, F316L, F321, F51, etc. Pressure rating Class 150 to Class 2500 (PN2.5 to PN 420) Applied Standard API, DIN, GOST,etc. Applied Temp. -196 to 450ï¼?-320 to 842ï¼? Applied Operator Manual, Gear, Electric, Pneumatic
China floating ball valve: forged steel, alloy steel floating ball valves, two-piece full & reduced bore, 24 inch, class 150, blow-out proof stem. Features: Side entry / top entry. Two-pieces design. Full & reduced bore. Anti-stactic device. Blow-out proof stem. Fire safe design. Specifications: Design: asme b16.34/bs 5351/api 6d. Face to face: asme b16.10. End to end: asme b16.10. End flange: asme b16.5. Bw end: asme b16.25. Test: api 598. Special: nace mr-01-75. Pressure: class 150lb. Size range: 24 inch. Material available: a105, lf2, f9, f11, f22, f304, f304l, f316, f316l, f321, f51, alloy steel.
Product design and scope Design standard: bs 5351 Butt welding connecting end: asme b16.25 Wall thickness: asme b16.34 Fireproof test: api 607/api 6fa Inspection and test:api 598 Pressure and temperature rating:asme b16.34 Main body material:a10565380;lf265380;f30465380;f31665380;f304l65380;f316l etc. Valve seat material: ptfe, rptfe, nylon, devlon, derlin, peek, ppl etc Drive device: handle, worm wheel, electric, pneumatic etc