Sfp

Description
The SFP transceiver is high performance, cost effective module supporting dual data-rate of 1.25Gbps/1.0625Gbps and from 10km to 20km transmission distance with SMF.
The transceiver consists of two sections: The transmitter section incorporates a FP laser. And the receiver section consists of a PIN photodiode integrated with a trans-impedance preamplifier (TIA). All modules satisfy class I laser safety requirements.
The optical output can be disabled by a TTL logic high-level input of Tx Disable. Tx Fault is provided to indicate that degradation of the laser. Loss of signal (LOS) output is provided to indicate the loss of an input optical signal of receiver.
The standard serial ID information compatible with SFP MSA describes the transceiver¡¯s capabilities, standard interfaces, manufacturer and other information. The host equipment can access this information via the 2-wire serial CMOS EEPROM
protocol. For further information, please refer to SFP Multi-Source Agreement (MSA).
The SFP transceivers are compatible with RoHS.


3x4x8 cm.

Fiber Media Converter
Fiber Patch cord
Optical Transceiver(SFP.GBIC.BIDI SFP , CWDM)
Fiber Adapter
Fiber Attenuator
Fiber video converter/PDH converter

1.25G GLC-LH-SM Optical Transceiver.

Dualfiber Singlmode 1310nm 10KM

Features

Dual data-rate of 1.25Gbps operation

1310nm FP laser and PIN photodetector for 10KM transmission

Compliant with SFP MSA and SFP-LH-SM with duplex LC receptacle

Digital Diagnostic Monitoring:

Internal Calibration or External Calibration

Compatible with RoHS

+3.3V single power supply

Operating case temperature:

Standard : 0 to +70ípC

Industrial : -40 to +85ípC

Applications

Gigabit Ethernet

Fiber Channel

Switch to Switch interface

Switched backplane applications

Outer/server interface

Other optical transmission systems




Standard export package

With the adequate production capacity and total quality management, a wide variety of sfp transceivers are available with different rates(155m, 1.25g, 2.125g, 2.5g and 4.25g) and transmission distance(from 550m to 120km).
Details about one modle of atop's sfp transceiver here.

Ap-s31121-3cl20
1.25 gb/s rohs compliant long-wavelength
Pluggable sfp transceiver

Product features
Upto 1.25gb/s duplex data links
Hot-pluggable sfp footprint
1310nm fabry-perot laser transmitter
Duplex lc connector
Rohs compliant and lead free
Upto 20 km on 9/125
Metal enclosure for lower emi
Single 3.3v power supply
Low power dissipation <600mw
Commercial operating temperature range: 0 centigrade to 70 centigrade
Ddm is also available
Cwdm is also available

Applications
1.25gb/s 1000base-lx ethernet
1.06 gb/s fibre channel

General
Atop's ap-s31121-3cxl20 small form factor pluggable (sfp) transceivers are compatible with the small form factor pluggable multi-sourcing agreement (msa). They simultaneously comply with gigabit ethernet as specified in ieee std 802.3 and 1x fibre channel as defined in fc-pi-2 rev. 10.0 .They are rohs compliant and lead-free.

With the adequate production capacity and total quality management,a wide variety of CWDM SFP transceivers and CWDM xfp transceivers are available with different rates (1.25G and 2.5G ) and transmission distance(from 40km to 120km). Details about one modle of ATOP's CWDM SFP transceiver here.



AP-SC49125-3CxL80
1.25 Gb/s RoHS Compliant CWDM
Pluggable SFP Transceiver

Product features
Up to 1.25Gb/s bi-directional data links
Hot-pluggable SFP footprint
Uncooled DFB laser transmitter in 8 possible CWDM wavelengths
Duplex LC connector
RoHS compliant and Lead Free
Up to 80 km on 9/125
Metal enclosure for lower EMI
Single 3.3V power supply
Low power dissipation <600mW
Commercial operating temperature range: 0centigrade to 70 centigrade

Applications
1.25Gb/s 1000Base-LX Ethernet
1.06 Gb/s Fibre Channel

General
ATOP's AP-SCxx125-3CxLxx CWDM Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). They simultaneously comply with Gigabit Ethernet as specified in IEEE STD 802.3 and 1x Fibre Channel as defined in FC-PI-2 Rev. 10.0 .They are RoHS compliant and lead-free.
Compliant with iec 60825-1 class 1/cdrhclass i laser eye safe
Rohs compliant products available

Applications:
Switch to switch interface
Switched backplane applications
Router/server interface
Other optical transmission systems

Description:

Atop ag-5524-bz8 transceiver is a high performance, cost effective module supporting dual data-rate of 1.25gbps/1.0625gbps and 80km transmission distance on smf. It is fully compatible with gigabit interface converter (gbic) specification (sff-8053), rev5.5. It can be inserted in or removed from host chassis without shutting power of the host system. It uses 1550 nm dfb laser for lr-2 applications, cwdm is also available.

Standards:

Compatible with gbic specification (sff-8053), rev 5.5
Compatible with ieee 802.3z
Compatible with ansi specifications for fibre channel
Compatible with fda 21 cfr 1040.10 and 1040.11, class

Tx-1310/rx-1490 nm single-mode bi-directional
Sfp simplex connector
155 mbps sonet oc-3/sdh stm-1/125 mbps fast ethernet
Features:
Compliant with sonet/sdh standard
Compliant with fast ethernet standard
Industry standard small form pluggable (sfp)
Package:
Simplex lc connector
Differential lvpecl inputs and outputs
Single power supply 3.3v
Ttl signal detect indicator
Hot pluggable
Class 1 laser product complies with en 60825-1

CWDM-SFP

Features


1) dual wavelength bi-directional tx/rx

2) single sc/pc receptacle optical interface compliant

3) 1250 mb/s symmetrical tx/rx data rate

4) 1490 nm cw mode dfb laser transmitter

5) 1310 nm apd/tia burst mode receiver

6) digital burst rssi function

7) single 3.3voltdcsupply

8) sfp package outline

9) hot-pluggable

10) 0 to 70 oc operation

Applications

Gigabit ethernet passive optical networks olt side

Fiber to the home, curb, office (fttx)

Point to multi point service (p2mp)

Notes:

1. Tx fault is an open collector output, which should be pulled up with a 4.7k~10kî© resistor on the host board to a voltage between 2.0v and vcc+0.3v. Logic 0 indicates normal operation; logic 1 indicates a laser fault of some kind. In the low state, the output will be pulled to 0.8v

10G SFP+ TO SFP+ DAC Series

Product Model: ESDPX-330CNxx

Data Rate: 10G

Fiber Type: 30~24#Cable

Place of origin: Made in China

Shipping Port: ShenZhen

Package type: Individual package or 10pc/package



Features

1.Support multi-gigabit data rates up to 10.5Gbps

2.Support 1x, 2x, 4x and 8x Fiber Channel data rates

3.Hot-pluggable SFP 20PIN footprint

4.Serial ID module on MOD(0-2)

5.AC coupling of PECL signals

6.EMI/EMC performance

7.Low Power Consumption < 0.5W

8.Power Supply :+3.3V

9.Compliant to SFP+ MSA

10.Temperature Range: 0~ 70 �°C

11.ROHS Compliance.



Applications

1.Gigabit Ethernet/Fiber Channel/Switch to Switch interface;

2.Switched backplane applications/Router/Server interface;

3.Other optical transmission systems