Automobile Cable Extruder Machine

Parameter specification
Jo-65jo-70jo-80jo-90
Specification/parameterdouble-shaftdouble-shaftdouble-shaftbig-shaft
Pay-off typepn400-630pn400-630pn400-630pn630-800
Pay-off bobbin¬)65¬)70¬)80¬)90
Screw diameter26:1 bm type26:1 bm type26:1 bm type26:1 bm type
Screw l:d120140200250
"extrusion
Capacity(kg/h)"25hp30hp40hp50hp
Main motor power¬)0.8-¬)1.0¬)1.5-¬)12¬)2.0-¬)20¬)3.0-¬)25
Range of wire diameter(mm)"single layer/
U shape""single layer/
U shape""single layer/
U shape""single layer/
U shape"
Cooling device 250m200m200m200m
Length of accumulating 5hp5hp7.5hp7.5hp
Haul-off power500m/min500m/min400m/min400m/min
Line speed (max)double axis/axisdouble axis/axisdouble axis/axisdouble axis/axis
"take-up
Type"pn500-630pn500-630pn500-630pn500-630
"take-up
Bobbin"4hp4hp5hp5hp.

GYJ series extrusion machine is the special equipment of making the P fixed- end anchorage. It is light and simple operation etc, and can squeeze BFM 15P and BFM13P extruding set.

Model:GYJ 500
Rated extrusion pressure:495KN
Extrusion hydraulic: 63Mpa
Stroke:150mm
Mass:70kg.


Overall dimension:760x200x200.

The polyester staple fiber machine (PSF plant) takes virgin PET Chips, recycled Bottle Flakes, Popcorn and Lumps, etc., as raw material, with continuous drying (or batch drying through Vacuum Dryer), high pressure melt spinning process engineering and VFD controlled Spinning & Stretching process engineering to produce normal Staple Fibre, High Tenacity Low Elongation Staple Fibre and Hollow Fibre. Single plant capacity is 15T.P.D. to 80T.P.D.
Equipment Technical Data
Titer Range dtex 6.67-16.67
Spinning Pos. nos. 6-24
Spinning Pitch mm 700, 750
Plant Capacity TPD 15-80
Spinneret dia. mm 328, 358, 410
Spinning Mechanical Speed m/min 500-1,500
Spinning Processing Speed m/min 500-1,300
Stretching Mechanical Speed m/min 240
Stretching Processing Speed m/min 230
Total Tow Titer at Stretching dtex 600,000-3,000,000
Stuffer Box Width mm 160-410
Cutting Length mm 25, 32, 38, 44, 51, 64, 76, 101
Bale Weight kg 200-350
Application:
Cushions Pillows Quilts Toys Jacket Mattress Non woven carpet Automotive felts, speaker felts, geo textiles, polyfill wadding, filter fabrics and other acoustics as well.

Spinning Line: Continuous Dryer Hopper Screw Extruder Polymer Pipe Filter Spin Beam (Meter Pump System, Spin Pack, Spinneret) Quenching Unit Interfloor Duct Draw-off Wall Capstan Roller Sunflower Gearing Unit Automatic Fiber Can Device

Drawing line: Can Creel Inlet Thread Guide Tow Guide Stand Dipping Bath 1st Draw Stand Draw Bath 2nd Draw Stand Draw Steam Chest 3rd Draw Stand Tow Stacker Crimper Steam Box Crimper Silicone Oil Sprayer Machine Tow Tension Stand Cutter Fiber Spreading Machine Relaxer Fiber Blowing system Baling Press

On the basis of absorbing foreigh advanced technology.Plastic extruding flat film stretching line is used by micro-processor control frequency conversion and silicone controlled dc etc.The main parts use foreign quality products.The line on large l/d ratio and mixing smelt section on the extruder screw for which is specially parts using quality steel, for the filter changing system we apply advanced foreign automatic filter changing structure.The heating board is changed into advanced stretching hot air oven and principal technical index of the line reach international advanced level.The line has the performance of high speed.Top yield, low energy consumption., good forming quality of the fiber dru.The structure of the line is compact with a pleasing appearance smooth running, flexible and reliable control sophisticated
Diameter of screw¡¨ºo65mm

This machine uses the polypropylene(pp) or high density polyethylene(hdpe) material to produce tapes for ppwoven bags, weaving through production procedures of material heating & extruding, splitting the film into tapes.Stretching & forming tapes, and then winding on the bobbins by winding machine, finally put the bobbins with tapes on circular loom for weaving.
The tape extruding & stretching machines are our, with the use of special and advanced technology, we have refored this series machine many times.Through iproving, the machine can be fit for all kinds of pp&pe material, such as 100% recycled material, powder or grain material, to produce tapes.The screw and barrel of extruder are ade of high quality 38croa1a alloy steel, the hardness is over hv950 after nitriding treatment.It has the performance of easy operation &
Motor power of extruder is 18.5kw
Heating power of extruder is 24kw
Width of die-lip is 600mm
Diameter of drum is 320mm
Number of arch heating plate is 2pcs
Heating power of the plate is 15kw
Stretching ration is 4-7
Production capacity is 30-80kg/h
Winding speed is 20-150m/min
Number of winder is 100spindles
System installed capacity is 98kw
Normal operational capacity is 64kw
Weight is 8000kg
Overall dimension(j*w*h) is 23600*2500*1800mm

This machine is absorbed from international advanced technical and manufactures by ourself, which major in producing monofilament yarn by hdpe and pp material
The monofilament yarn can be widely used for rope, fish-net, safe construction net, article hair, mosquito nets brushes as well as protectives nets for the cotton fields.
The assembly is compacted in its structure.Ad motor is used for drawing thus a synchronous speed regulation and a single speed regulation can be achieved to meet the different parameters.The spinnerets produced by the most advance way so that the flatness and eveness of the filaments can be ensured.Stability in motion, sensitiveness in control, convenience operation, high safety and reliability.

¡êabrush monofilament ¡êaropes
¡êafishing line ¡êafishing nets
¡êavelcro monofilament ¡êamosquito nets
¡êazipper onofilament ¡êaconstruction safety nets

Model is sj-ys-45
Diameter of screw¡ê¡§mm¡ê© is 45
Rotation of screw¡ê¡§r/min¡ê© is 10-50
Capacity¡ê¡§kg/h¡ê© is 20-45
Diameter of yarn¡ê¡§mm¡ê© is 0.1-0.35
Line speed¡ê¡§m/min¡ê© is 100-150
Number of spindlers is 100
Install power¡ê¡§kw¡ê© is 90
Overall dimensions¡ê¡§m¡ê© is 23*1.7*1.7

We supply Co-rotating parallel twin screws extruder for PE/PVC /HFFR/ (peroxide and silane based) XLPE cable material compounding. All the raw material will be feed into twin screw extruder first for compounding. Then falls into single screw extruder for cooling down and extrusion.

Salient Features of two stage extruder EC65/TDD180 for PVC:
1) Main motor of twin screw extruder 90kw, L/D=40
2) One venting port and one vacuum port
3) Screw rpm: 60-600rpm
4) The output capacity: 400~600kg/h
5) One mixer, one loader and one feeder
6) One soft water cooling system, one vacuum system and one filter system
7) One single screw extruder with motor 55kw, L/D=9
8) Air cooling die face cutting system with cyclone and classifier
9) One control panel.



Painted with anti-corrosion oil, and covered with plastic film, fumigation cost is on Buyer's side, if any.

1 The screw and cylinder are nitrogenation treated and precise processed. So it is hard, wearable and anti-cauterization.
2 The whole set adopts perch brake driving. So the rewinding is very smooth.
3 The electric part adopts brake driving. So it can help to save power 30%.
4 The noise is low, no dust, environmental and power saving.


Installing Dimensions (m) 13¡Á1.3¡Á1.2 weight 2000kw.

Teflon ptfe extruder
Plastic ram extruder machine features:
1, automatic control
2, easy to operate
3, low power consumption
4, product size stability
5, precise sintering
6, environment-friendly and energy-saving
Application:
Ptfe ram screw extruder products tube, and it has the best chemical corrosion resistance and the dielectric properties, not aging, not sticky, it also has the lowest friction coefficient. So the tube has a wide range of applications
Model no. Machine model pfb-80
Plastic extruder Ptfe
Power 20 kw
Min - max dia 25-80 mm
Tolerance 0.5-2 mm
Length Unlimited
Production per hour 7kg
Electricity consumption per hour 2.5 kw
Weight of the machine 960 kg
High of the machine 1560 mm
Floor area of the machine 1.2 m2
Warrenty for parts 1 year
Machine gurantee period 1 year
Free spares 1 set
Deliver lt 30 days
About us:
Changzhou sunkoo machine tech co., ltd
Professional experience: 10+ years only in the field of the ptfe extruder
Manufacturing capacity: 50 sets / year.
Technology strength: have a professional and experienced designer team to meet your any requirement

Model ptfe series is a single screw extruder for extruding dia lower 150mm rod and dia lower 500mm tube. The automatic production line is controlled by computer, which is really easy to operate. Meanwhile, the plastic extrusion machine is advance designed, high output, low energy consumption, long-life, and also our professional engineer is available to offer overseas after sale service. We can solve various problems to improve the equipment efficiency for you.

Hot tags:teflon ptfe rod;teflon ptfe tube, teflon ptfe extrusion

-