Optical Fiber Ranger

SF2011 ( Mini OTDR ) Optical Fiber Ranger By using the method of Optical Time Domain Reflection technology, the SF-2011 Mini OTDR can meets the most demanding test requirements of optical fiber fault location. From the Power-On state, the SF-2011 provides the fastest and easiest solution on the market for determining the fiber length or fault location. Along with handheld and portable design, fully automated, one-button operation makes it the ideal mode for the users. Features: 1,Portable, rugged, lightweight; Easy to use. 2,Built-in visual fault locator (VFL), conveniently to find the faults in dead zone. 3,Long battery life, up to 5000 measurements operation. 4,Automatic Pulse Width Control design to ensure a convenient operation. 5,Testing the distance of the fiber and identify the faults location in the fiber link. 6,Locates reflective and non-reflective breaks in the fiber network. 7,Support USB to transmit the data. Specification: Connector Type: FC/APC FC/PC Light Source: FP laser diode Wavelength:1550nm,1310nm Fiber Type: 9/125um single mode Precision:¡À10m(Reflection point),¡À200m(No reflection point) Minimum dead zone: 10m Max distance: 80km 50km Resolution: 0.001km Display unit: km VFL Wavelength: 650nm Power Out: 1mW Connector Type:Universal Connector Battery Battery Type: 2 AA alkaline battery Continuous operating time(@25¡ãC):>1000times or VFL continuous working 10hours Auto power off: 3min Environmental Operating temp: 0¡ãC to +40¡ãC Storage temp: -20¡ãC to +70¡ãC Humidity: 0 to 95%(no frozen) Physical Dimensions(mm): 157 x 86 x 40 Weight(kg): 0.25.

The STC-CC027 9.8ft Mini DisplayPort to DisplayPort Adapter Cable, features a Mini DP male connector on one end, and a DP male connector on the other, allowing you to connect any Mini DisplayPort-equipped laptop (including the Mac family of products) to an HDTV, monitor or projector that uses a standard DisplayPort connection.The mini DP to DP cable supports high resolutions of up to 4k x 2k (3840 x 2160) 60Hz with a maximum HBR2 bandwidth of 21.6 Gbps. The cable also supports Multi-Stream (MST) for daisy chaining multiple monitors and provides optional audio support.

Supplier: Fiber optical transceivers(sfp, sfp+, xfp, bidi, x2, xenpak, aoc, dac), passive modules(wdm mux/demux), optical quipment

Supplier: Splicing machine, OTDR, transmitter, receivers, CAT 5 cables
Buyer: Splicing machine, OTDR, transmitter, receivers, cat 5 cables

Supplier: Sfp module, sfp transceiver, fiber optic module , cisco sfp module , huawei sfp module , hp sfp module, sfp modules, sfp module price , gbic module , cisco sfp

Supplier: Satellite equipment i.e. CATV amplifier, modulator, tapoff/splitters, co-axial cable, optical fibre cable, PA equipments, mike stand, battery clip and cord and connectors

Supplier: Fiber optical splicing machine, fiber cleaver, OTDR machines, satellite antenna

Features: Lead-free Wavelength selectable to c-band itu-t grid wavelength No reference clock required Cold start up wavelength compliance Dwdm-rated eml transmitter and pin receiver Link length: 80km With rohs directive-compliant

Fiber optic splice closure Insert plates and fixing bolts are used to fix and seal fosc, and its installation is quite simple. The fosc is suitable for protecting fiber cable splices in straight-through and branching applications. It can be placed in aerial, underground, wall mounting, handhole mounting and duct mounting applications. Based on an advanced formula, the plastic parts are made of injection-molded, high-strength engineering plastic pc by numerical control equipment, therefore effectively prevent products from aging caused by coldness, heat, oxygen and ultraviolet radiation. The strong housing and main components provide fire resistant, waterproof, and quakeproof while protecting splice closure during pulling, torsioning and impacting.