Submersible sewage pump
Technical parameter:
Model: qwb,
Discharge: 5 to 6000 m3/h (1.4-1666.7l/s)
Lift head: 6 to 80 m (19.7- 262.5 feet)
Max. Rotary speed: 2900 r/min
Pump outlet diameter: 50-600mm (2-23.6 inch)
Temperature: -5 to +50 deg. C
Maximum system pressure:
Product characteristics 1, the use of a unique single or double impeller structure, greatly improve the ability of dirt through the pump diameter of 5 times the fiber material and the diameter of the pump diameter of about 50% of the solid particles. 2, the mechanical seal uses a new type of hard corrosion-resistant tungsten titanium material, which can make the pump run safely and continuously for more than 8000 hours. 3, the overall structure is compact, small volume, low noise, significant energy saving effect, easy maintenance, no need to build pump room, diving into the water can work, greatly reducing the project cost. 4. The pump seal oil chamber is equipped with a high-precision anti-interference water leakage detection sensor, and the stator winding is embedded with a heat-sensitive element to automatically protect the pump motor. 5, can be equipped with automatic control cabinet according to user needs, the pump water leakage, leakage, overload and overtemperature automatic protection, improve the safety and reliability of the product. 6. The float switch can automatically control the start and stop of the pump according to the required level change, without special care, and it is very convenient to use. 7, WQ type submersible sewage pump can be equipped with double rail automatic coupling installation system according to user needs, it brings more convenience to installation and maintenance, people can not enter the sewage pit for this. 8, can be used in the full head, and ensure that the motor will not overload. 9, there are two different installation methods, fixed automatic coupling installation system, mobile free installation. Main use WQ type submersible sewage pump is suitable for chemical, petroleum, pharmaceutical, mining, paper industry, cement factory, steel mill, power plant, coal processing industry, as well as urban sewage treatment plant drainage system, municipal engineering, construction site and other industries conveyor belt sewage, dirt, can also be used for pumping clean water and corrosive media.
Submersible sewage pump Technical parameter: Model: qwb, Discharge: 5 to 6000 m3/h (1.4-1666.7l/s) Lift head: 6 to 80 m (19.7- 262.5 feet) Max. Rotary speed: 2900 r/min Pump outlet diameter: 50-600mm (2-23.6 inch) Temperature: -5 to +50 deg. C Maximum system pressure:
Application Transferring sewage and wastewater to wastewater treatment plant. Dewatering waste water from industrial plant (e.g. petrochemical plant. etc) Pumping wastewater explosive atmospheres likely to present Operating
Pump range: Capacity: 8 8980 m3/h Head: 3 60 m Speed: 495 / 590 / 730 /980 /1470 / 2940 rpm Power: 11kW 580kW Voltage: 380V, 6kV or 10kV Discharge Dia.: DN65 DN 1000 Medium Temp.: â?¤ 40 Degree Pump Weight: 128 10000 kg Description: The submersible sewage pumps can meet the needs in the aspects of municipal engineering such as flood control pumping station and integrated pumping station, building construction, industrial sewage, waste water treatment, environmental protection, irrigation etc. They can be used to convey sewage, wastewater and urban sewage which contain solid particles and various long fibers. Our submersible sewage pump can be installed by auto-coupling device (QDC), hard pipe and soft pipe, fixed and movable installation, and dry type installation with cooling jacket.
Detailed product description Model: qwb, qzb Discharge: 5 to 6000 m3/h (1.4-1666.7l/s) Lift head: 6 to 80 m (19.7- 262.5 feet) Max. Rotary speed: 2900 r/min Pump outlet diameter: 50-600mm (2-23.6 inch) Temperature: -5 to +50 deg. C Maximum system pressure:
QW/WQ Submersible Sewage Pump Application: Municipal works, Industrial buildings Hotels, Hospitals, Civil air defence Drain off the sewage, waste water, rainwater and living water containing solid grains and various long fabrics QW/WQ Submersible Sewage Pump Feather: 1. ) Impeller: With single-channel or double-channel impeller, which is similar to an elbow of the same section, the pump is particularly suitable for the medium containing solid particles( particle size: 50% pump flange size). 2. ) Mechanical seal: Double-channel mechanical seal in series(doule seal type), with durable wear and corrosion resisting seal material. Motor side: Ceramic/Ceramic Pump side: Silicon carbide/Hard Alloy 3. ) Bearing. Three sets. One at the motor side and two at the pump side. SKF and NTN type bearing available if request. 4. ) Oil and water probe: Once the mechanical seal damages and water comes insides, the probe will send out signal to make the protection action. 5. ) Float switch: If request, with pump control cabinet, the float switch can automatically control the pump stop/start according to the water level 6). Movable and fixed installation optional, and double guide automatic rail available. 7. ) Motor: Insulation class: Class F, and protection class 58 Capacity range(m3/h) 5---3000 Head range(m3/h) 7---60 Outlet size(mm) 25---500 Power(kw) 0.75---250 Material: Cast iron, SS302,SS304,SS316 Shaft seal(mechanicalseal) SIC,TC, ceramic,graphite... Temp up to 120 degree PH 3-11 Installation Movalbe or auto coupling type Water leakage probe float switch.
Non-clog sewage pump Adc 00