Screws Optical Sorting Machine

Rotatory glass plate optical sorting machine

Machine's Character:
* Measurement for simultaneous top/bottom inspection.
* Also suitable for tiny electronic parts.

Adaptable Product:
O-ring, seal, packing and product can stand stably on the glass surface.

Inspection items:
1.Hole diameter
2.Concentricity
3.Thickness
4.Crack
5.Color
6.Surface Stain
7.Bubbles
8.Burrs.

Fastener, nuts sorting machine

Machine's Character:
* Variety of inspection modules satisfied for the most of inspect needs.

Adaptable Product:
Nuts, rivet, roller, washer, stud, set screws and products can stand stable on the belt.

Inspection items:
1.Thread
2.With coating
3.Hole diameter
4.Outside diameter
5.Concentricity
6.Roundness
7.Overall height
8.Deformed
9.Crack
10.Marking
11.Width/length
12.Thickness.

Eddy current sorting machine


Inspection items:
1. Recognition of hardness difference , accurancy 2 HRC ( +/- 1HRC)
2. Recognition of different metal material mixed.
3. Same size with similar material parts mixed
4. With/without high frequency harding difference.
5. Dimension measurement of appearance by laser or optic ( extra optional)
6. crack sorting (extra optional).

1.Vacuum chamber size| H1500mm,which is made of high grade 304 stainless steel ,inner surface by polishing treatment, surface with cooling water jacket,postposition pumping system vertical front opening door structure,viewing window installed in the door,and equipped with glass panel,vacuum chamber stainless steel plate thickness 1mm ,convenient to clean and maintain,up cover board installed lifting rings,in bleeding point there installed electric throttle flap,and 1 pcs KF40 deflation valve.

2.Substrate holder speed 330rpm AC variable frequency speed regulation(Korea LG) up driven way.Workpiece plate axial and radial runout 2mm;ferrofluidic seal,Bearing adopts Japanese NSK whole substrate holder structure adopts 304 stainless steel.

3.Vacuum pumping system 2sets 28inches diffusion pump+ 1set British Edward Monoblock pump275+1setBritish Edward roots pumpEH2400 and high vacuum pneumatic baffle valve form fast and efficient vacuum pumping system which can meet pumping requirements during coating.Equipped with compound vacuum gauge,which used for measuring high and low vacuum degree.Between valves there is safety interlock to make sure equipment safety use.

6.Vacuum chamber heated by electric heating tube,which can realize automatic control temperature.

7.Equipment base use merchant steel made,surface spray paint, open the door, beautiful decoration.

2D optical measurement instrument

Machiner Properties:
Saving over thousands of specifications, simply one lesson will do, easily click to load the related setting data. Rapid measurement and the measurement result can be able to save for analysis or inquiry purpose. Well apply to at-site inspection, sampling inspection for Q.C. and before delivery.

Inspection items:
1.Hole diameter
2.Diameter
3.Concentricity
4.Roundness
5.Straight line distance
6.Center distance
7.Straightness
8.Perimeter
9.Area .

Fusion splicer pt-630
Features
Fiber core can be display clearly
Singlex or y view and x & y view simultaneously
Auto check quality of cleaved end face
Auto select best splicing program
9 seconds splice time and 30 seconds heat time
Small bulk and light weigh
5 inch color lcd monitor with clear digital image display
Simple operation menu
Software upgrade via usb interface
Specification
Model Pt-630
Applicable fibers Sm (itu-t g.652), mm (itu-t g.651), ds (itu-t g.653), nzds (itu-t g.655)
Fiber cleaved length 12~16mmú¿coating diameterú¦250ª8mú¬
16mmú¿coating diameter: 250 ~ 1000ª8mú¬
Fiber diameter Cladding diameterú¦80 ~150ª8m
Coating diameterú¦100~ 1000ª8m
Fiber count Single
Fiber aligning method Core aligning
Image processing method Digital
Actual average splice loss 0.02db ú¿smú¬, 0.01db (mm),
0.04db (ds), 0.04db( nzds)
Splicing time Typical 9 secú¼with standard sm fiber
Splicing mode 53(templet), 40(user)
Splice loss estimate More accurate
Return loss ú+60db
Storage of splice result 5000 resultsú¼3 parameter per result
Fiber display and magnification 400xú¿x or y viewú¬, 200xú¿x and y viewú¬
Tube heating time Typical 30 sec
Tube heating mode 9(templet), 24(user)
Tube heating temperature Can be adjusted
Applicable protection sleeve length 60mm, 40mm and a series of micro sleeves
Tension test 2n
Electrode life 2500
No.Of splice/heating with battery Typical 130 cycles (splice/tube heat) with inner li-battery
Display screen 5 inch color lcd monitor
Image change over The fiber image is turned upside down
Terminals Rs 232
Operating condition 0 ~ 5000m above sea level, 0 ~ 95%rh and -10í½50íµ, respectively, max. Wind velocity of 15m/s
Power supply Ac 100-240v with ac adapter; inner li-battery(6600mah)
Dimensions 150mm(l) x150mm (w) x150mm (h)
Weight 2.7 kg excluding battery, 3.2 kg including battery

Fusion splicer pt-650
Features
Equel to fujikura fsm-50s, sumitomo type-37 etc
Core to core alignment by pas technology
( pas:profile alignment system)
Digital fusion splicer with automatic focus function
Fiber core can be display clearly
Single x or y view and x & y view simultaneously
Auto detect cleaved endface fault
Display fiber cleaved and offset angle
Display core and clad offset
5.6 inch tft color lcd monitor with clear digital image display
Usb & vga interface
Software upgrade via usb interfac

Specefication
Model Pt-650
Applicable fibers Sm (itu-t g.652), mm (itu-t g.651), ds (itu-t g.653), nzds (itu-t g.655)
Fiber cleaved length 12~16mmú¿coating diameterú¦250ª8mú¬
16mmú¿coating diameter: 250 ~ 1000ª8mú¬
Fiber diameter Cladding diameterú¦80 ~150ª8m
Coating diameterú¦100~ 1000ª8m
Fiber count Single
Fiber aligning method Core or clad aligning
Image processing method Digital
Actual average splice loss 0.02db ú¿smú¬, 0.01db (mm),
0.04db (ds), 0.04db( nzds)
Splicing time Typical 9 secú¼with standard sm fiber
Splicing mode 53(templet), 40(user)
Splice loss estimate More accurate
Return loss ú+60db
Storage of splice result 4000 resultsú¼20 parameter per result
Fiber display and magnification 300xú¿x or y viewú¬, 150xú¿x and y viewú¬
Tube heating time Typical 30 sec
Tube heating mode 9(templet), 24(user)
Tube heating temperature Can be adjusted
Applicable protection sleeve length 60mm, 40mm and a series of micro sleeves
Tension test 2n
Electrode life 2500