10 Pair Switching Module

10/100m management switch

Complies with ieee802. 3 10base-t, ieee802.3u 100base-tx. Store and forward 111function. . Full / half duplex mode, supports auto-negotiation technology . Plug and play installation with automatic port configuration . 1610/100m self-negotiable rj-45 ports, auto-shift 10base-t and 100base-tx. .Basic board width: 4.8 gbps, supply separate board width for each port to 111realize real bon-blocking transmission . Store-and-forward .Built-in 4m bit data buffer, supply full forwarding rate . Supports port trunking . Supports vlan function, max. 16 vlan groups & 802.1q 32 vlan groups max. . Supports 3 kinds of pri setting: port, tos, ieee802.1p .19" standard rack-mounted size

-

Description
XH-DSW-1X2 optical switch module is an optical path control device, has the role of controlling the optical path and converting the optical path; it can realize 2-channel optical signal input, select the signal output of one of the channels (support bi-directional use), the module supports key manual switching and RS-232 serial port command control. It has an important role in optical communication applications. Optical switch is mainly used in optical transmission systems for multiple optical monitoring, LAN multi-source / detector automatic switching, and optical sensing multi-point dynamic monitoring system optical test system for optical fiber, optical devices, network and field engineering optical cable testing; optical device installation and adjustment.

10/100m+gigabit port switch

Auto mdi/mdi-x on each port to simplify integration into a network complies with the ieee802.3, ieee802.3u, and ieee802.3ab features store-and-forward mode with wire-speed filtering and forwarding rates ieee802.3x compliant fullduplex flow control led indicators for simple troubleshooting .

-

Mechanical Optical Switch Module XH-OSW-1X12 is an optical path control device, with the role of controlling the optical path and converting the optical path, the size of this module can be up to 12 channels; can achieve multiple optical signal input, select the signal output of one of the channels or vice versa (to support bidirectional use), the module control mode using TTL high and low logic level control, the microcontroller chip pins can be directly driven control. It has an important role in optical communication applications. Optical switch is mainly used in optical transmission systems for multiple optical monitoring, LAN multi-source / detector automatic switching, and optical sensing multi-point dynamic monitoring system optical test systems for optical fiber, optical devices, networks and field engineering optical cable testing; optical device mounting.


Features


hLow insertion loss, wide wavelength range


Low channel crosstalk, high stability, high reliability


Imported motor components, higher reliability of life


Failure self-test function in internal circuit design


Simple control mode, small size, easy to embed in the system


Parameter


Parameter Parameter value
Model XH-OSW-1XN N 12
Insertion loss dB Typical value: 0.5 Maximum value: 0.8
Wavelength range nm 800~1310 1260~1650
Working wavelength nm 850/980/1310 & 1310/1550/1625
Return loss dB Multimode 30 & single mode 50
Channel crosstalk dB 70
Polarization dependent loss dB 0.05
Wavelength dependent loss dB 0.25
Temperature dependent loss dB 0.25
Repeatability dB 0.02
Switching times Times >107
Switching time ms 8
Transmission power mW 500
Power supply V/mA 5/600
Operating temperature -20~+80
storage temperature -40~+85
Package size mm 80 40 32

Description:

The matrix optical switch module is a kind of optical path control device, which can be arbitrarily interconnected among multiple groups of input ports and multiple groups of output ports. Due to its advantages such as good environmental performance, it is mainly used in optical communication for cross-connection of backbone optical nodes, multi-dimensional online monitoring, etc.

Features:

Low insertion loss

Fast switching

Support half-cross/full-cross customization

Support input/output port power monitoring customization

High stability and high reliability

Features/special features:
Complies with ieee802.3 10base-t, &ieee802.3u 100base-tx standards
8 10/100mbps self-negotiable rj-45 ports; 1 uplink port
Absolute separating technology, auto-separate port with troubles
All ports support full duplex mode, support ieee802.3x full duplex flow control standard / half duplex back-pressure flow control
Built-in 2m memory
Support auto-negotiation technology, full/half duplex auto detection
Built-in separate buffer to avoid lost of data package
Store and forward
Separately external dc power ensure stability of equipment
Switch led indicator: 1 led (power)
Port led indicator: 8 leds
Power: dc7.5v/800a
Operation temperature: 0 ~ 55 íµ
Store temperature: -20 ~70 íµ
Operation moisture: 10~90%
Store moisture: 5~90%
Approval: ulú¼culú¼tuvú¼ce



Oem/odm packaging or generic retail packaging

8x8 mems fiber optical switch- features
Base on mems technology
Small package
High stability, high reliability
Epoxy-free on

TPS54140DGQR MSOP-10 Switching Regulator Converter IC Chip.TPS54140DGQR Automotive computer Commonly Used Vulnerable Chip.

LNK-1400P-SFP Series 10/100Mbps copper to fiber switch provides IEEE 802.3af/at Power Sourcing Ethernet (PSE) functionality on the 4 twisted pair ports, supplying both data and electric current to devices such as WiFi access points, VoIP phones and IP security cameras.

It is an ideal solution when PoE-powered network devices need to be installed further than the 100 m / 300 ft. LNK-1400P-SFP supports 100M Ethernet Port and 100M SFP Port. The Ethernet port supports both half-duplex and full-duplex mode. Users can use different type of SFP modules (single-mode/multi-mode fiber, 1/2 core) as needed.


Standard Packaging: Carton packaging(Support customer Logo)