MLS High Temperature Resistant Needle Felt is made of more than two kinds of high temperature resistant fibers for getting better chemical performance. MLS felts have many advantages, such as high temperature resistant, high strength and corrosion resistance. After chemical treatment and finishing treatment, it also possesses the abilities of easily cleaning, waterproof, antistatic and so on. MLS felts is more wearable and stronger than fiberglass woven filtration, so it can work quickly and can load more pressure.Compared with synthetic chemical fiber, MLS are heat resistant and corrosion resistant with good stability, strength and low cost. MLS felts are widely used in steel plant, metallurgy and smelt factory, cement, power plant, chemical industry, etc. filter.material at yahoo.com.cn
Carbon box: 700*350*350
Weight: 1.5kg
PE felt is most widely applied in the temperature between 130 C and 150 C, as well as its special properties as other needle punched felt, and it also has good anti-abrasion and higher ratio performance & price. Temperature resistance of Acrylic fiber needle punched filter felt is from 140 C to160 C, which has the best property of anti-acid, anti-alkali, hydrolysis resistant. A new needle felt is developed to overcome common PE felt¡¯s shrinkage in long circumstance on the basis of other PE felt temperature of 130 C or up. It¡¯s steady performance temperature is between 150 C and 170 C filter.material at yahoo.com.cn Size of carbon box: 700*350*350mm Weight: 1.5kg/pc
Nomex Needle Felt--The characteristics of ZH Metamax needle felt: high temperature, anti-acid, anti-alkali, high filtration blow speed, low pressure drop, anti-break, and anti-abrasion, but it easily be hydrolyzed in the condition of high temperature, which mostly applied in steel factory, carbon black, cement, power plant, etc. Size of carbon box: 700*350*350 Weight:1.5kg/pc
PTFE needling felt is made of PTFE filament fiber base cloth and PTFE short cut fiber as surface needling. PTFE filter bags can be made for different working conditions and filtration accuracy requirements. Wayon technology 100%PTFE needling felt with good self-run, no moisture absorption, and can withstand ultraviolet radiation,With outstanding heat, cold, not water absorption, not burning characteristics. It is widely used in waste incineration, iron and steel metallurgy, thermal power and other industries.
PTFE needle felt is made of PTFE filament fiber base cloth and PTFE short cut fiber as surface needling. PTFE filter bags can be made for different working conditions and filtration accuracy requirements. Wayon technology 100%PTFE needling felt with good self-run, no moisture absorption, and can withstand ultraviolet radiation,With outstanding heat, cold, not water absorption, not burning characteristics. It is widely used in waste incineration, iron and steel metallurgy, thermal power and other industries.
Liaoning Shengyuan Industrial Co.,Ltd professional supply felt products for aluminum profile industry. Products include: A. Endless transfer belts B. Roller covers C. Felt pads D. Spacer bar covers E. Timing belt with felt covers F. Woven high temperature belts Felt pads series products include: a. PBO+Kevlar pads Material: PBO+Kevlar Temperature resistantce: Continual 550, peaking at 650 Thickness:2-12mm b. Kevlar pads Material: Kevlar Temperature resistantce: Continual 480, peaking at 550 Thickness:2-12mm c. Nomex pads Material: Nomex Temperature resistantce: Continual 280, peaking at 370 Thickness:2-12mm d. Polyester pads Material: Polyester Temperature resistantce: Continual 180, peaking at 260 Thickness:2-12mm Contact informationï¼? Emailï¼?sales@lnshengyuan.cn Mob/Whatsappï¼?+8615140230656
Liaoning Shengyuan Industrial Co.,Ltd professional supply felt products for aluminum profile industry. Products include: A. Endless transfer belts B. Roller covers C. Felt pads D. Spacer bar covers E. Timing belt with felt covers F. Woven high temperature belts Felt pads series products include: a. PBO+Kevlar pads Material: PBO+Kevlar Temperature resistantce: Continual 550, peaking at 650 Thickness:2-12mm b. Kevlar pads Material: Kevlar Temperature resistantce: Continual 480, peaking at 550 Thickness:2-12mm c. Nomex pads Material: Nomex Temperature resistantce: Continual 280, peaking at 370 Thickness:2-12mm d. Polyester pads Material: Polyester Temperature resistantce: Continual 180, peaking at 260 Thickness:2-12mm
SCRIM FOR NONWOVEN NEEDLE FELT AND SHOE LINER FELT Nonwoven scrims provide strength and stability to other nonwoven, film, Paper and textile materials. These reinforced materials rind their way into automotive, agricultural, hospital and medical, building trades, civil engineering, filtration and various apparel markets. Capability Low shrinkage Uniform Pore distribution High Strength and Temperature resistance Use of wide varieties of yarns for specified end use Customized width Application Non woven Industries Coating and Lamination Industries Tape Industries
Description Textile machine needle calender felts are used in calender machine for dye precess and aims to make the cloths soft and smooth than before, used in after processing stage of textile. our endless calender felt could proess in high temperature , fabric come out soft and smooth. Specificatoin Composition: 100%Nomex Heat-resistance: 210-260 Composition: 50%Nomex(on working surface) + 50%Polyester Heat-resistance: 160-210 Composition: 100%Polyester Heat-resistance: 120-160 Density: 2200g/m2-3600g/m2 Thickness: 5mm-10mm Width: 1600mm-3600mm Advantages 1.Even thickness,smooth surface and strong tension, 2.Wide range in weight. 3.Same texture can be produced to your original sample 4.Environmental friendly and harmless to human body 5.Easily cut into different sizes. 6.Has passed ROHS,CA117,BS5852
Description Sanforizing machines are used in shrinkage bottom wait and denim finishing plants. Manufactured by our special heat-resistant Nomex, Polyester and Wool, we can produce the felts for different models of sanforizing machines. Speocification Material: Nomex, Polyester, Wool Density: 2000g/m2-4000g/m2 Thickness: 6mm-10mm Application: Needle felt for sanforizing are used on the following machines : Monforts, Morrison, Muzzi, Sperotto Rimar, Bisio, Cibitex, Mather & Platt, Farmer & Norton, Monti, Tepa, Swastik, Dhall, Swastik, Thakore, Yamuna, Ronson, I Kuang, Poong Kwang, etc.