Metallized YIG Microwave ferrite substrate Technical requirements: 1- The Ferrite Thickness should be 0.37mm. In the process of ferrite production, fine grinding method should be used. The surface of the ferrite should be polished (To reduce the roughness). Material:CY1780 2- Use a soft gold coating. Clad layer: Cu1m4mAu2.5m5.7m. The plating thickness should be 8~10m(Red area ). 3- The bottom side will be attached to a Gold plated carrier by soldering. The solder paste model can be Pb63Sn37. The carrier material is Iron. Clad layer: Cu36mNi14m Au12m. The final carrier dimensions (after plating) are 12mm X 9mm X 0.5mm. 4- The resistive layer should be 75 Ohm/Sq. The final resistor should be 50 Ohm (+/-10% tolerance) (Green area)
Metallized YIG Microwave ferrite substrate Technical requirements: 1- The Ferrite Thickness should be 0.37mm. In the process of ferrite production, fine grinding method should be used. The surface of the ferrite should be polished (To reduce the roughness). Material:CY1780 2- Use a soft gold coating. Clad layer: Cu1 m 4 m Au2.5 m 5.7 m. The plating thickness should be 8~10 m(Red area ). 3- The bottom side will be attached to a Gold plated carrier by soldering. The solder paste model can be Pb63Sn37. The carrier material is Iron. Clad layer: Cu3 6 m Ni1 4 m Au1 2 m. The final carrier dimensions (after plating) are 12mm X 9mm X 0.5mm. 4- The resistive layer should be 75 Ohm/Sq. The final resistor should be 50 Ohm (+/-10% tolerance) (Green area)
Metallized microwave ferrite substrate for antenna use.
Microwave ferrite substrate: Size:60*48*1mm;60*48*0.5mm;48*30*1mm;48*30*0.5mm SATURATION MAGNETISATION (GAUSS):1750-1800 DIELECTRIC CONSTANT:15,0 ±5% DIELECTRIC LOSS TANGENT: 0.0002 CURIE TEMPERATURE (NOMINAL VALUE)(°C):280 LINE WIDTH (Oe):25 SPIN WAVE LINE WIDTH (Oe):2 FINISH: CLEAN.
Microwave ferrite substrate: Size:60*48*1mm;60*48*0.5mm;48*30*1mm;48*30*0.5mm SATURATION MAGNETISATION (GAUSS):1750-1800 DIELECTRIC CONSTANT:15,0 ±5% DIELECTRIC LOSS TANGENT: 0.0002 CURIE TEMPERATURE (NOMINAL VALUE)(°C):280 LINE WIDTH (Oe):25 SPIN WAVE LINE WIDTH (Oe):2 FINISH: CLEAN.
Microwave Ferrite Technology, Inc. is the largest manufacturer of microwave ferrite materials in China, producing tens of millions of pieces each year for the wireless industry. The products range from high volume garnets for wireless infrastructure to specialized materials for radar applications. Our Ferrites & Magnetic Materials include: Narrow Linewidth Aluminum & Aluminum Gadolinium Substituted Garnets Gadolinum Substituted Garnets Cobalt & Holmium Doped Garnets Magnesium Spinels Nickel Spinels Lithium Spinels If you have any questions or need further details, feel free to contact us
TTVG-1850 Microwave ferrite for microwave switch
Triangle Microwave ferrite for the isolator(10kw 2.45ghz ) in MPCVD in Artificial diamond industry. NOTE One isolator needs to be equipped with 24 pieces of triangle microwave ferrite.
Microwave ferrite(A50) for phase shifter Li Zn - Ti - Mn - (Co) Lithium - Zinc - Titanium Manganese - (Cobalt) MS(Gauss) :5000gs±5% Tc (°C) :450 H (Oe) 170 ±20% Hk (Oe) 3±5% DIELECTRIC CONSTANT15.3 DIELECTRIC LOSS TANGENT 0.0005 Br (Gauss) 3300
