Product Description Cassette type single facer provides convenient maintenance and provides quick flute change. The corrugating rolls changing can be accomplished within 10 minutes utilizing a motorized cassette trolley, by which cassette is delivered into the machine and fixed on the base of the machine. Features 1. Maximum mechanical speed is 250m/min. 2. The diameter of the corrugating rollers is 380 mm. The diameter of the pressure roller is 520 mm. The diameter of the surfaces of glue roller is 302 mm, The diameter of the doctor roller is 170mm. 3. The machine adopts positive pressure air cushion paper guide, with high utilization of heat energy, and good quality of corrugated shaping 4. Corrugated roller adopts positive pressure cassette type. Its under the pressure roller, so as to lower the center of gravity of the machine. Its smooth when under high-speed operation, and reduces vibration, so its more stable and smooth during operation. Corrugated roller exchange is saver and faster. 5. Corrugated roller, pressure roller and glue roller adopts individual driving reduction box, to isolate vibration. The oil immersion lubrication and high precision gear driving ensure stable and reliable during operation. 6. Corrugated roller sets get in and out hydraulic automatically, so as to exchange different flutes rapidly. 7. Individual glue section could move out from the main machine, and its easy to clean and maintain. An electric glue partition device is provided to give convenient and rapid paper width adjustment. 8. The glue roller has low speed auto-rotate function, so as to avoid the glue dry on the glue roller. 9. A frequency conversion motor is used to supply power, realizing stepless speed adjustment and reliable and synchronous interlock with the following devices. The frequency converter used is an international famous brand product with stable and reliable performance and low failure rate. 10. All bearings of the upper and lower corrugated rollers, and pressure roller adopt high temperature grease, so as to guarantee long life and smooth running of the rollers. Technical Parameter Paper Width(mm) External Dimensions Weight(T) Total Power of Motor 1400 5300x3100x2600 12 59.2 1600 5500x3100x2600 14 59.2 1800 5700x3100x2600 16 59.2 2000 5900x3100x2600 18 71.2 2200 6100x3100x2600 20 71.2 2300 6300x3100x2600 21 71.2 2500 6500x3100x2600 23 81.2
A. As for the fluting type which can be connected with e-b-c-a-f-g flute, we also can make any type of the flute and cut-off size for the machine that customer required. B. Upper and lower corrugated roller, pressure roller, pre-heater roller are through by air cylinder. Set up steam recovery system. C. Oil immersed type gear box driven directs the lower fluting roller, pressure roller, glue roller and doctor roller performed by steam. Single drive mechanism to avoid glue sticking to roll surface when stopping. D. The motion of the upper corrugated roller, pressure roller and glue roller are operated by the hydraulic cylinder. Set up a hydraulic unit control. E.Designed by fingerless with a vacuum blower by positive pressure to keep fluting profile then glue. F. The single facer to use cassette quick change flute profile and change cassette within 20 minutes, the steam joints and drive clutch also adopted quick change device in order to saving the time to change flute and machine stop. Price, delivery time, moq are negotiable, please contact us for quotation.
MJSF-320FX Single Facer Introduction: Single Facer is the main machine for producing the corrugated paperboard. Vacuum suction model single facer has very good production precision. The choose of the machine is directly effecting the quality of the corrugated paperboard. Characteristics: * Paper leading with Vacuum absorb model, have high-pressure & strong fan motor. The flow of fan can be adjusted, and have silencer; The electric control system fastens on a electrical case, which has min. 1.5meter distance from equipments, the operation side is completely independent. * Gimble drive system, separated structure and independent drive case. Closed gear drive system with oiling lubrication, the usage life of the gears is highly prolonged. * Machine base and wallboard is cast iron structure, thickness of the wallboard is 180mm. * Corrugated Roll: Material of corrugated roll is 52CrMo alloy, which is dealt with quench, surface polish. Diameter of roll is Ø 320mm, surface hardness is more than HRC60. The adjust of up and down of roll is pneumatic controlled. * Press roll: Diameter is Ø320mm, surface is worn down and chromeplated. The adjust of up and down of roll is pneumatic controlled, material is Carbon Iron 45#, dealt with confection. * Pre-heater Roll: Diameter is Ø400mm, surface is worn down and chromeplated. All are connect with soft metal pipe. * The bearing of corrugated roll and press roll are lubricated and high-temperature resistant. * Glue supply and quit is pneumatic controlled, diameter of glue roll is Ø240mm, surface of roll has concave netted rind, surface polish & chromeplated. Surface of adjust roll is surface polish & chromeplated. * Use electrical glue separate equipments, the glue part can run independently when the main motor stops, this can avoid the dry of the glue.(Choose by customer.) * Middle height of corrugated roll is 0.10mm, middle height of press roll is 0.075mm. Have place limit equipment, diameter of tighten cylinder is Ø160mm. Technological Parameters: 1. Working width: 1600mm, 1800mm, 2000mm,2200mm. 2. Design speed: 120m/min. 3. Operation direction: Left or right (design as customer’s workshop.) 4. Gas: 0.4-0.9Mpa. 5. Steam pressure: 0.8-1.3Mpa. 6. Flute: UV or UVV model, can design as customer’s requirement. Diameter of the rolls: 1. Corrugated Roll: Ø320 mm 2. Press Roll: Ø320 mm 3. Gluing Roll: Ø240 mm 4. Pre-heating Roll: Ø400 mm Drive Power: 1) Main Motor: 11KW, 380V, 50HZ 2) Fan Motor: 15KW, 380V, 50HZ
MJSGL-2 Single Facer Line (2-layer corrugated paperboard production line) (2-ply corrugated paperboard line) Roll Stand Single Facer Paperboard Cutter Note: For the Single Facer line, we can produce different model roll stand, single facer, and paper cutter as customer's requirements. Introduction: Single facer line is also called 2-layer corrugated paperboard production line. This Single facer Line is composed of Paper Roll stand, Single facer machine, circumvolve paper cutting machine. To use the web paper material single face machine production line, producing and cutting single face corrugated paper as required sizes, it forms the corrugated board with no need drying. This unit has the advantages of reasonable fabric, advanced technology, high quality of production, high efficiency, low workmanship, operation and maintenance easy. This is the preferred equipment for the production of corrugated cardboard of the cardboard factories. Technological Parameter: Working Width 1400mm 1600mm 1800mm 2000mm Heating method Electrical heating/Oil heating / Steam heating Design speed 40-70m/min Economical speed 30-60 m/min Compress-air pressure 0.4-0.9MPa Flute type Standard flute UV Flute Standard spec. A,B,C,E,F
MJSF-380D Single Facer (Double Flute) Purpose and Characteristics: 1) Design speed:200m/min 2) Effective width of machine: 1400mm-2500mm 3) Main flute roller diameter¦Õ380mm, pressure roller diameter¦Õ385mm, preheater roller diameter¦Õ400mm. 4) Vacuum suction paper leading features perfect flute formation 5) Dual flute structure, one pair flute rollers unit working and another preheating, achieve flute quickly change. Save working space ( if normal single facer machine need two sets to achieve this function ). 6) PLC control system. Touch screen display all running data, easy for operation. 7) The flute rollers made by special alloy steel with hardness treatment . it' hardness can reach HRC58-60, The surface is well treated by grind and plated chrome, or adopt Tungsten carbide flute rollers are optional. 8) The independent driving box, five driver axis, all gears with hardness treatment, oil spray lubricating by oil pump to reduce noise keep running stable, prolong the use life of gear. 9) Adopt Glue width motorized dividing to match the paper width. Idle running motor for glue applicator roll to avoid glue dry. Adjustment for gap between glue roller and doctor roller by electric . Digital read out for the gap between glue roll and doctor roll. Glue unit can be moved by pneumatic. 10) Flute rollers and pressure roller controlled by hydraulic system, working pressure stable. 11) With water spray device for adjust moisture capacity of flute paper. 12) This dual flute machine suit for single facer paperboard production line ---2 layer (Single facer paperboard ) and corrugated paperboard production line--- 3 & 5 &7 layer. With high market competitive power.
Supplier: Paper-saving single facer, strength and both
Supplier: Corrugated paper making machine, flute laminator (mounting machine), single facer, UV vanishing machine, cutter & creaser
Supplier: Corrugated paper machine, single facer, paper corrugated board, automatic splicer, corrugated paper making machine, glue facility machines
A. The orders changed of size fastest in approximately 3-7 seconds to get pre-setting position. And provide 99 memories pre-setting for order change at any time also accommodatingly in the production management system. B. The machine has installed precision liner slides and ball screw bearing with encoder to get accurate position. The precision allowance within 0.5 mm to adapt of accuracy requirement various processing factories. C. The upper scoring wheels is single convex type. It can be replaced destruction wheels to used. The upper and lower scoring wheel has equipped 3 types: convex to convex, convex to concave and convex to flat . Selected by switch button. Operate easily. D. Front scoring units affirmed to rear scoring units, the scoring distance of board to achieve the random size. E. The round razor type slitting knives. It can slit cardboard orderly and pretty. The minimum slitting edge is 3~5mm. F. Automatically grind and lubricate without removing slitting knives and extended the life of knives. G. Lubricant device is fixed by level feeding system which volume control very accurately and no waste even no any pollution to the board and environment Price, delivery time, moq are negotiable, please contact us for quotation.
