Rough Finish

A top coat. Cement Base silica mixed solid powder product. Spray or hand trowel. Rough surface.

DATA SHEET FOR EPOXY EPOXY COATING :- INTRODUCTION - EPOXY COATING (HYB) is a two part high solids solvent free epoxy phenolic resin based coating system designed for hard wearing, smooth surface finish for floors, walls and on steel structures. Nonskid surface finish can be achieved on floor, if required. FEATURES: 1) Hard Wearing 2) Non Dusting 3) Excellent Surface Finish 4) Non Smelling 5) Good Aesthetics 6) Highly Chemical Resistant APPLICATION: 1.Stir well before mixing Part A and Part B and mix in the prescribed ratio. 2.Apply one coat of EPOXY primer on the clean and dry surface. 3.EPOXY COATING (HYB) should be applied on the surface by brush or roller within 24 hrs. After application of primer coat it should be allowed to air dry for min. 4 hrs. Preferable in a dust free atmosphere. 4.Apply min. 2 coats with the intercoat interval of 6-8 hrs. PRODUCT SPECIFICATIONS: Application - Brush, Roller Mixing Ratio - As Directed on Packing Port Life - 30 Mins. Drying Time - Touch Dry- 30 Min, Hard Dry 6 Hrs. - Intercoat Interval 6-8 Hrs. Min. - Dry Film Thickness 125-150 Microns/per coat - depending on porosity Covering Capacity - 6-8 sq.met/kg per coat depending on porosity, roughness & method of application. Color Shades - All Standard Shades RECOMMENDED USES: 1) Food & Pharmaceutical 2) Work Shop 3) Clean Room Application 4) Chemical Resistant Coating for Concrete& Steel 5) Petrochemical, Fertilizer plants METHOD OF APPLICATION: SURFACE PREPARATION The long-term durability of the applied Epoxy coating (HYB) epoxy coating is dependent on the adhesion between sub-base and coating material. It is most important therefore, that the substrate surfaces are correctly prepared prior to application. 1.Before application of the Epoxy coating (HYB) surface should be free from loose partials, rust, oils, grease or earlier coatings and should be totally dry. 2.New concrete or cementations surface should be placed at least 28 days and have a moisture content of less than 5% before application of Epoxy coating (HYB) 3.After surface is dry, all repair work like sealing of joints, cracks filling of cavities and crevices should be carried out. HEALTH & SAFETY - Keep the containers tightly closed when not in use. Avoid contact with skin & eyes. It comes in contact with the body, wash affected parts with plenty of water and contact a doctor. Other known sector for Epoxy floor lining, Epoxy garage floor lining, Concrete epoxy lining, Concrete floor epoxy lining, Epoxy pipe lining, Marine epoxy lining, Sub marine epoxy lining, Basement lining epoxy floor shield, Louisiana, Oregon, Chip lining color epoxy floor, Aviation lining epoxy interior.

*Size:7"(178mm).
*Nap:12mm.
*Rod:8mm.
*Zinc plated steel frame.
*Semi smooth to semi rough surfaces.
*Polyamide cover leaves a smooth finsh.
*For all paints.
*Semi smooth to semi rough surfaces
*Roller frame can be attached to click in style extension pole for added versatility
*Polyamide cover leaves a smooth finish
*For all paints

Nuvent Super pro exterior emulsion offers excellent resistance to rough weather keeping the superior sheen finish. This Emulsion gives cleaner shades which last longer than any other paint. Nuvent Super pro exterior emulsion protects the wall from anti-algae, anti-fungal and prevents growing moss in heavy rain fall areas or in humid climate conditions. Best performance shown used with Super-Pro Primer.
Coverage area : 68 to 70 Sq.ft*/litre (2 Coats)
Drying time : 30 min (Recoat frequency : 1 hr)
Colours : Standard/Customized

No. Type SILK Interior Emulsion provides a luxurious finish and a silky glowing appearance to the wall.
1 FEATURES SILK Interior Emulsion is water based, Economical interior emulsion for distinctly rich and smooth finish as compared to distemper. Ideal combination of pigments & extenders mixed in a co-polymer emulsion for smooth and pleasant matt finish with Good washability.
2 RECOMMENDED APPLICATION SILK Interior Emulsion is an interior wall finish that can be applied on all type of smooth plaster, false ceiling, asbestos sheets, concrete etc.

PRODUCT TECHNICAL DATA
No COLOURS White & other shades as per shade cards
1. FINISH Smooth and matt
2. COVERAGE On smooth primer masonry surface by brushing
1 coat: 140-160 sq.ft/ltr
2 coats: 80-90 sq.ft/ltr
(It may vary due to factors such as methods and conditions during application and surface roughness etc.)
3. DRYING TIME Surface drying time â?? 10-15 minutes
4. GLOSS LEVELS/SHEEN LEVELS Silky smooth sheen
5. FLASH POINT (IS101/108 Part 1, Sec 9) Non- flammable
6. SUITABILITY OF THINNER PAINT Use within 24 hrs.
7. SHELF LIFE 12 Month from date of manufacture in original tightly closed containers away from direct sunlight and excessive heat.

No. Type
SUMO Acrylic Washable Distemper is a water-based, interior wall paint. It is India's most trusted distemper and gives your walls a delightful, attractive, matt finish.
1 FEATURES SUMO Acrylic Washable Distemper gives good durability and smooth finish. Due to the fast drying properties, quicker completion of painting job is possible. It is available in bright and attractive shades..
2 RECOMMENDED APPLICATION SUMO Acrylic Washable Distemper is an interior wall finish. It can be applied on all type of smooth plaster, false ceiling, asbestos sheets, concrete etc.

PRODUCT TECHNICAL DATA
No COLOURS White & other shades as per shade cards
1. FINISH Smooth and matt
2. COVERAGE On smooth primer masonry surface by brushing
35-40 sq.ft/kg/2 coat
(It may vary due to factors such as methods and conditions during application and surface roughness etc.)
3. DRYING TIME Surface drying time - 25-30 minutes
4. GLOSS LEVELS/SHEEN LEVELS Matt
5. FLASH POINT (IS101/108 Part 1, Sec 9) Non- flammable
6. SUITABILITY OF THINNER PAINT Use within 24 hrs.
7. SHELF LIFE 12 months from date of manufacture in original tightly closed containers away from direct sunlight and excessive heat.

BUILDER COAT Acrylic Interior | Exterior emulsion is matt finish.

FEATURES :-
BUILDERCOAT Acrylic INTERIOR | EXTERIOR emulsion provides a smooth long lasting rich finish to the INTERIOR & EXTERIOR wall. It is washable and most stain can be removed easily by sponging with mild soap solution. The paint film is having good resistance to fungus and mildew.

RECOMMENDED USE :-
BUILDERCOAT Acrylic INTERIOR / EXTERIOR emulsion is INTERIOR / EXTERIOR wall finish that can be applied on all type of smooth plaster, asbestos sheets, concrete etc.

PRODUCT TECHNICAL DATA :-
COLOURS : White & other shades
FINISH : Smooth and Matt
COVERAGE : On smooth primer masonry surface by brushing
1 coat: 130-160 sq. ft/ltr
2 coats: 80-90 sq.ft/ltr
(It may vary due to factors such as methods and conditions during application and surface roughness etc)
DRYING TIME : Surface drying time â?? 10-15 minutes
GLOSS LEVELS/SHEEN LEVELS : Matt
FLASH POINT (IS101/108 Part 1, Sec 9) : Non- flammable
SUITABILITY OF THINNER PAINT Use within 24 hrs.
SHELF LIFE 18 months from date of manufacture in original tightly closed containers kept away from direct sunlight and excessive heat.

Eco HOME Acrylic Distemper gives smooth ,beautiful and matt finish to the wall at an affordable price, It does not come off on the hands or on clothes likechuna thus ensuring bright colourful walls all year long.It is an economical chalk resistance coating.

RECOMMENDED APPLICATION

Used only on interior surface.

PRODUCT TECHNICAL DATA

No COLOURS White & other shades as per shade cards
1. FINISH Smooth and matt
2. COVERAGE On smooth primer masonry surface by brushing
18-20 sq.ft/kg/2 coat
(It may vary due to factors such as methods and conditions during application and surface roughness etc.)
3. DRYING TIME Surface drying time 25-30 minutes
4. GLOSS LEVELS/SHEEN LEVELS Matt
5. FLASH POINT (IS101/108 Part 1, Sec 9) Non- flammable
6. SUITABILITY OF THINNER PAINT Use within 24 hrs.
7. SHELF LIFE 12 months from date of manufacture in original tightly closed containers away from direct sunlight and excessive heat.

Nano Acrylic Cement Primer is water based, Economical interior primer with good whiteness,good coverage and flow and leveling properties.

RECOMMENDED APPLICATION

Nano Acrylic interior wall primer that can be suitable for priming plastered wall,asbestose,cement concrete etc.

PRODUCT TECHNICAL DATA

No COLOURS White
1. FINISH Smooth and matt
2. COVERAGE 1 coat: 90-100 sq.ft/ltr
2 coats: 60-70 sq.ft/ltr
(It may vary due to factors such as methods and conditions during application and surface roughness etc.)
3. DRYING TIME Surface drying time â?? 10-15 minutes
4. GLOSS LEVELS/SHEEN LEVELS NA
5. FLASH POINT (IS101/108 Part 1, Sec 9) Non- flammable
6. SUITABILITY OF THINNER PAINT Use within 24 hrs.
7. SHELF LIFE 12 Month from date of manufacture in original tightly closed containers away from direct sunlight and excessive heat.