Luxes Titanium Floor Finish is a cement-based product that can be applied on the floors. This product is specially designed to replace the use of high-cost floor tiles. The latest innovation of the decade to save time and money with the option of different architectural designs and finishes.
A top coat. Cement base solid product which is available in required color. Hand trowel.Smooth surface.
An top coat.Cement Base silica mixed solid powder product which is available in required colour.Hand trowel.Rough or semi rough surface.
Supplier: Water base paints interior and exterior skim coats interior and exterior, fillers, tile adhesives, titanium wall finishes, titanium floor finishes , paint textures cement textures , cement under coats ,cement top coats , clay wall finishes , clay floor finishes , clay top coats , water base floor and wall sealers
Buyer: Cement, calcium carbonate, acrylic binders rdp powder, hpmc ,silica sand
DATA SHEET FOR EPOXY EPOXY COATING :- INTRODUCTION - EPOXY COATING (HYB) is a two part high solids solvent free epoxy phenolic resin based coating system designed for hard wearing, smooth surface finish for floors, walls and on steel structures. Nonskid surface finish can be achieved on floor, if required. FEATURES: 1) Hard Wearing 2) Non Dusting 3) Excellent Surface Finish 4) Non Smelling 5) Good Aesthetics 6) Highly Chemical Resistant APPLICATION: 1.Stir well before mixing Part A and Part B and mix in the prescribed ratio. 2.Apply one coat of EPOXY primer on the clean and dry surface. 3.EPOXY COATING (HYB) should be applied on the surface by brush or roller within 24 hrs. After application of primer coat it should be allowed to air dry for min. 4 hrs. Preferable in a dust free atmosphere. 4.Apply min. 2 coats with the intercoat interval of 6-8 hrs. PRODUCT SPECIFICATIONS: Application - Brush, Roller Mixing Ratio - As Directed on Packing Port Life - 30 Mins. Drying Time - Touch Dry- 30 Min, Hard Dry 6 Hrs. - Intercoat Interval 6-8 Hrs. Min. - Dry Film Thickness 125-150 Microns/per coat - depending on porosity Covering Capacity - 6-8 sq.met/kg per coat depending on porosity, roughness & method of application. Color Shades - All Standard Shades RECOMMENDED USES: 1) Food & Pharmaceutical 2) Work Shop 3) Clean Room Application 4) Chemical Resistant Coating for Concrete& Steel 5) Petrochemical, Fertilizer plants METHOD OF APPLICATION: SURFACE PREPARATION The long-term durability of the applied Epoxy coating (HYB) epoxy coating is dependent on the adhesion between sub-base and coating material. It is most important therefore, that the substrate surfaces are correctly prepared prior to application. 1.Before application of the Epoxy coating (HYB) surface should be free from loose partials, rust, oils, grease or earlier coatings and should be totally dry. 2.New concrete or cementations surface should be placed at least 28 days and have a moisture content of less than 5% before application of Epoxy coating (HYB) 3.After surface is dry, all repair work like sealing of joints, cracks filling of cavities and crevices should be carried out. HEALTH & SAFETY - Keep the containers tightly closed when not in use. Avoid contact with skin & eyes. It comes in contact with the body, wash affected parts with plenty of water and contact a doctor. Other known sector for Epoxy floor lining, Epoxy garage floor lining, Concrete epoxy lining, Concrete floor epoxy lining, Epoxy pipe lining, Marine epoxy lining, Sub marine epoxy lining, Basement lining epoxy floor shield, Louisiana, Oregon, Chip lining color epoxy floor, Aviation lining epoxy interior.
A top coat. Clay base cement mixed solid powder product. Hand trowel. Both rough and smooth surfaces can be obtained.
A top coat. Cement Base silica mixed solid powder product. Spray or hand trowel. Rough surface.
Water base acrylic paint, available in vast range of different colors. Brush or spray.(Available in 1L,4L,10L,20L buckets)
Water base acrylic paint, available in vast range of different colors .Brush or spray.(Available in 1L,4L,10L,20L buckets)
Luxes Wall Finish for interior and exterior use is a high quality rapid setting product consists of cement, gypsum & pigments blended with specially graded fillers & ingredients for the finishing & smoothing of walls or any other imperfect surfaces. Latest innovation of the decade to save time and money with the option of different architectural designs and finishes.
