Inertial Navigation Teaching Vehicle

Product Function; 1. Binocular camera practical training platform contains binocular camera assembly, speed simulation device, moving target, alarm device, through the upper computer software to complete the FCW, LDW, HMW and other auxiliary driving functions and auditory system, visual system alarm and other functions. Practical training program: 1. Complete camera detection, communication configuration, camera calibration, attitude learning, warning learning, etc. through camera installation tools. 2. Learning calibration of binocular camera through moving target. 3. Real-time running results of lane lines and obstacles can be viewed through the camera demonstration interface. 4. Camera collision warning function through simulated vehicle speed detection. 5. Image acquisition and analysis.

Product Features; 1. The training platform contains ultrasonic radar (8), low-speed collision controller, millimeter-wave radar radar sensor (77HZ), CAN analyzer. Millimeter-wave radar and ultrasonic radar system can realize the installation and adjustment of practical training, as well as installation and adjustment of the data after the completion of the preservation and analysis. Through the interface free switching can view the ultrasonic and millimeter wave radar detected obstacle information. Practical training program: 1. millimeter wave radar collected obstacle information data analysis. 2. millimeter-wave radar scanned obstacle coordinate system analysis. 3. Ultrasonic radar data information processing.

i.About The Product The device is designed based on the Volkswagen Passet CAN data transmission network system to holistically demonstrate the structure and operation of the system. The device applies to theoretical teaching and maintenance training of the CAN data transmission network system in secondary and senior vocational skill schools, normal education and training institutions. ii.Features 1.A real and operable CAN data transmission network system is used to illustrate the structure of the system. 2.Circuit components of data transmission signals, for example, the gear switch, speed signal, and door control switch signal, are operated to illustrate operation of the CAN data transmission network system. 3.The training panel is made of advanced aluminum-plastic plate with characteristics of not less than 4mm thick, corrosion resistance, impact resistance, pollution resistance, fireproof, and moistureproof. Its surface are processed by special craft and spraying primer. Never fade color circuit diagram and working principal diagram are painted on the board whose surface coating with varnish. The trainees can learn and analyze the working principle of the control system by referencing the diagram and the real object. 4.The training panel is installed with detection terminals to detect electric signals, for example, resistance, voltage, current, and frequency, of circuit components of the CAN data transmission network system. 5.The training panel is installed with a diagnosis socket ,which can connect to automobile decoder to read fault codes reads fault codes, clears fault codes, and reads data stream from the engineer control unit (ECU) connected with the in-vehicle network. 6.The training panel's base frame is made of steel and the surface is paint-coated. Self-retention wheels are installed. 7.Instead of using accumulators and requiring charging, the training panel connects to a 220V AC voltage which changes to a 12V DC voltage through the internal circuit. The 12V DC voltage protects the training panel against short circuit. 8.Equipped with intelligent fault setting and appraisal system, include fault setting, troubleshooting and assessment functions etc. iii. Basic Parameter 1.Size: 2400mm × 700mm × 1800mm (length x width x height) 2.External power supply: A.C. 220V ± 10% 50Hz 3.Operating voltage: 12V DC 4.Operating temperature: -40? to +50?

The Main Purpose 1. It is suitable for all types of institutions and training institutions to demonstrate the teaching needs of the principle and structure of automobile engines. 2. Applicable to the needs of automotive professional skills appraisal and assessment. 3. Applicable to the teaching and understanding of the structure and principle of the engine, disassembly and assembly to provide standard reference materials. Structure And Composition Anatomical four-cylinder diesel engine mechanical assembly (including engine assembly, intake and exhaust manifold and motor accessories, etc.), electric motor, mobile mounting base, etc., gantry operating instructions and other accessories. Technical Parameter Equipment shape: 1200 500 100mm (length width height) Power: 220V Working temperature: -40 C +50 C Host: original car device Motor: 220V/250W 15 rpm FAQ: 1. What is packing of this equipment Is it suitable for shipment Equipment will be wrapped with shrink film to avoid any scartches, the outside packed by standard wooden case. It is suitable for shipment. After you receive equipment, it's better to carefully check the overall appearance of equipment. 2. How about payment terms and lead time 50% deposit upon the contract, balance against check and acceptance before shipping. (The lead time can be negotiated according to specific situations) 3. How about the after-sales We provide 1 year warranty, and if you have question about the equipment please contact us at any time, we will reply you within 12 hours. Hot Tags: engine cutaway model, China, manufacturers, suppliers, engineering, OEM, ODM, school supplies for engineering teaching, automotive electrical tool kit, Speed Gear Reducer Automotive Training Model, start motor, automotive brake system, Lab Equipment For Teaching Vehicle

Hybrid Vehicles Engine System Trainer According to the connection mode of hybrid drive, hybrid cars are generally divided into three categories: Series Hybrid Electric Vehicle (SHEV) is mainly composed of three major powertrains such as engine, generator and drive motor, which form the HEV power system in series. The engine and drive motor of a parallel hybrid electric vehicle (PHEV) are both power assemblies, and the power of the two power assemblies can be superimposed on each other or can be output separately. Hybrid hybrid electric vehicle (PSHEV) is an electric vehicle composed of series and parallel structures. It is mainly composed of three power assemblies: engine, motor-generator and drive motor. Main Configuration Engine assembly, transmission assembly, power battery, inverter, the original car engine, transmission, computer, combination instrument, engine starting, hybrid computer running all the relevant original car accessories, fault setting and eliminate system, the original car circuit principle diagram and testing of the terminal, the large capacity battery, stainless steel tank, engine speed, console, movable bench, the bench power master switch, diagnosis, cooling system, digital display table, fuel pressure gauge, vacuum gauge, universal casters with locking, etc. Technical Parameters 1. Overall dimensions: 1500 1200 1800mm (length width height) 2. Fuel NO: 92# 3. Working power supply; DC 12V 4. Product model: ZC-QCG002 Hot Tags: hybrid vehicles engine system trainer, , manufacturers, suppliers, engineering, OEM, ODM, school & office supplies, educational equipmentdriving school lab training teaching equipment, automobile air conditioning, automotive engine trainer, Engine Training Rotating Stand, pneumatic braking model