The controller is designed for solar dc lighting system. There are several optional working modes, and has two output modes. Dc output modes and two time setting modes.
Specifications: 12v, 12/24v, 5a, 10a, 15a
Use mcu and professional software as the control center to fulfill intelligent soc control, protection to overload, outside and insdie short circuit, reverse connection, thunder and lightining, pv panel reverse current, over charge and discharing etc, usd pwm high efficiency charging way and temperature compensation.
Industry level production standard, led indication on system condition.
The controller pcb is pained with england apl lacquer, its highly moisture-proof
- Material : Stainless Steel Core, Polyethylene Yarn, Span Yarn - Number of Stitiches : 10 Gauge - Length : 14 inch - Cut Level : 5 - Color : Gray, Black, White - Packing : 1pair/individual packing (1pack=5pair, 1box=200pair) - Origin : Made in South Korea - Purpose : Cut Resistant
Supplier: Consumer electronics, industrial control, and high speed connectivity cables and connectors.
Services: Manufacturer, designing, customization for consumer electronics, industrial control, and high speed connectivity cables and connectors.
Buyer: Consumer electronics, industrial control, and high speed connectivity cables and connectors.
Supplier: Air dryer, control valves , heat exchanger, instruments and controls
Services: Sourcing industrial goods from india
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
Supplier: 1.( origin : russia / kazakhstan ) en590, jet a1, jp54, lng, urea, petroleum coke etcpetroleum coke ( petcoke ), etc 2. sugar icumsa 45 ( origin : brazil ) & non gmo soybean 3. ( origin : south korea ) power cable, control cable, cable & wire, instrument cable, silicon insulated cable, armored cable, thermocouple extension cable, fiber optic communication cable, coxial cable, marine cable, offshore cable
Follow Current turn-off metal-ceramic GDT Two-electrode metal-ceramic GDT Three-electrode metal-ceramic GDT SMT metal-ceramic GDT
Liquid Cooled Charging Cables are electric vehicle charging cables that utilize liquid cooling to achieve high-speed charging. These cables feature a 500A current rating and a 1000V voltage rating for charging speeds up to 500KW.
Supplier: Agriculture product and garment product, marine oil, ship engine oil low sulphur fuel, propulsion oil, high sulphur fuel, gl4 oil, water resistant oil, cycle rickshaw & thela, stabilizer, electronic voltage corrector
Supplier: Copper cathodes, instrument fittings (stainless steel /brass /mild steel), tubes, pipes(seamless/erw), copper tubes, valves(globe/gate/ball valves/butterfly valves), manifolds, pipe fittings, condensate pot, air headers, flush ring, cable trays, orifice flange assembly, thermowells, syphon, pu fittings, ibr and non ibr materials and structural steel (angle, channels, plates, round/hex bar),
