Products: HMS 1 and HMS 2 Metal Scrap
Grade: AA
Type: Rail Scrap, Casting Irons etc
Metal: 100%
Alloy Or Not: Non-Alloy
Color: Multiolor
Secondary or not: Non-secondary
We engage in metal materials, metal products, steel products, i.e. ferrosilicon, titanium iron, silicon ferrozirconium, ferrovanadium, ferrowolfranium, mg-ferrosilicon-rare-earth alloy, ferromolybdenum, ferrochromium products, ferromanganese products; non-ferrous metal products, i.e. stibium ingot, silicon-calcium, silicon manganese, zinc-alum alloy, zinc ingot, lead ingot, chrome powder, magnesium ingot, aluminium ingot/ coil/ can/ scrap, copper ingot/wire/ sheet/ scrap, Plastic and Polymer Scrap, Plastic Raw Material Granules, Rubber Scrap, Paper Scrap, etc. Chemical Composition: C:0.06 - 0.082% Mn:0.75 - 1.05% SI:0.13 - 0.28% P: Max 0.035% S: Max 0.045% Ar: Max 0.15% HMS 1 / 2 STEEL METAL SCRAP FOR SELL: Iron Scrap HMS1 & 2 C:0.06 - 0.082% Mn:0.75 - 1.05% SI:0.13 - 0.28% P: Max 0.035% S: Max 0.045% Ar: Max 0.15% HMS 1 / 2 STEEL METAL SCRAP FOR SELL: Iron Scrap HMS1 & 2 C:0.06 - 0.082% Mn:0.75 - 1.05% SI:0.13 - 0.28% P: Max 0.035% S: Max 0.045% Ar: Max 0.15%
SPECIFICATIONS: the following Percentage Points: Chemical Composition Carbon - 0.54 to 0.82% Phosphorus - 0.035% max Manganese - 0.60 to 1.05% As. - 0,01max of Mass share Silicone - 0.18 to 0.40% Sulphur - 0.035% max Norms - R-50 GOST-7173-75 / R-65 GOST- 8165-75 The scrap consists of R-50 (51,67 KG/m) R-65 (64,72KG/m) Used Rails shall be considered free of alloys when the residual alloying elements do not exceed Cut to 1.5 meter length (standard) 1. Technical terms: USED RAIL R50-R65 2. Specifications and Chemical Composition: Used Rail: R50 (51.67KG/Meter, GOST 7173-55), Used Rail: R65 (64.72KG/Meter, GOST 8161-75). Size & Weight: Length: 12meter ~ 12.5meter Maximum or less according tobuyerâ??s instruction; Expenses on seller Width: 5.5 inches ; Weight: 64.72Kg. No fishplates or steel pieces or bolts are attached to the used rails. All rails are clean and straight. No pitting. Only atmospheric rust No heavy rust. It is mandatory that Rails must be cut into length 1.5 meter(max.) before shipment.
Specification of Used Rail R50/R65: Used Rail - GOST R-50-R65 R50 (51.72 Kg / Meter) GOST 7173-55 R65 (64.72 Kg/Meter) COST 8161-75 Chemical Composition of the steel scrap is of international standard as follow: MN: 0.60 1.05; C: 0.54 0.82; Sl: 0.18 - 0.12; S: 0.04 Max; P: 0.035 max. MOQ contact: Used rails R50-r65 15,000mt x 12 months MOQ contact: HMS1/2 15,000mt x 12 months
Used metal scrap hms 1&2, used rails Used Rail Scrap Offer Description - Used metal scrap hms 1&2, used rails Used Rail Scrap USED RAILWAY STEEL SCRAP Price of product ( USD price or FOB price) : USD 170 per MT Key Specifications/Special Features : 1ST- Product: R50-R65 Used rail steel scrap 2ND- Specification: ISRI 200â?? 202,1- R50-R60 AND R65 with (ISRI) standard classification,- R50-R60 ( 51.67 KG/running meter),- R63-R65 ( 64.72 KG/running meter), Lengths from 6 MS TO1.25 MS, C:0.06 - 0.082% Mn:0.75 - 1.05% SI:0.13 - 0.28% P: Max 0.035% S: Max 0.045% Ar: Max 0.15% * NORMS : R-50GOST-7173-75 AND R-65 GOST-8165-75,R50 (51.67 KG/M)-GOST-7173-75R65 (64.72 KG/M)-GOST-8165-75,Cutting:1 - 1.5 - 6 - 12 meters (or other cuts) Cutting: 1 - 1.5 - 6 - 12 meters (other cuts).
Specifications :- used rails - R50/R65 Carbon (C): 0.54 0.082% Manganese (Mn) 0.75 - 1.05%, Silicon (Si): 0.18 0.40%, Phosphorous (P): Max. 0.035%, Sulphur (S): Max. 0.045%, Arsenic (Ar): Max. 0.15% Width: 0.5 m Iron Balance: Norms R50 Gost 7173-73 and R65 Gost-8165-75 R50(51.67KG/M)-Gost- 7173-75 R65(64.72KG/M)- Gost- 8165-75
Scrap metals, heavy truck engines and trans, rears and parts, scrap. Currently we have 30 tons of railway materials.
I have 5 million tons of used iron rails ready to ship out The amount can be as high as 10 million tons Minimum amount can start with 500,000 tons but not less than that The price can be negotiated The terms of payment must be LC letter for the whole amount, or an MT705 letter first and conditions of the LC can be negotiated Please note that in order to save your time and to avoid scams , please do not contact me with demands other than the LC letter , any other methods of payment will be ignored
We supply all kinds of Cast Iron Scrap with good price and good service.All the product is available contact us for more details. Cast Iron Scrap for sale. Free from mud, dust, fluff, non ferrous inclusions, excessive rust and other impurities. Free from war and explosives, shells, cartridges, other arms and ammunitions used or otherwise and any closed containers. Free from any radioactive materials, any harmful chemicals, substances, and coatings, any organic waste and any other harmful substances. Dirt, dust rust, fluff and other impurities not allowed over 1%. Type: HMS Scrap Composition: iron Scrap Metal Application: Melting HMS Type: HMS1 & 2 Packaging Details: Bulk and Customers preferences d) All scraps shall be free of explosive and oily materials and woody substance in any event. e) Packing arrangement: In break bulk.
HMS 2 Scrap :HMS 1 HMS 2 METAL SCRAP / USED RAILS / CAST IRON FOR SALE ! Used Rails R50 - R65, At Best Price/Used Rail Scrap for sale /Used Railway Track in Bulk Used Rail Steel Scrap HMS 1 and HMS 2 Scrap Heavy Melting Scrap Product Name rail steel Specifications 38Kg/m 43Kg/m 50Kg/m 60Kg/m Length 12M, or customized as required Standard ASTM, JIS, DIN, GB, Steel Grade ASTM A2008 JIS 1103-91 DIN 536 GB/T 2585 Test Chemical Component Analysis, Mechanical Properties, Technical Properties, Exterior Size Inspection, , X-ray Test. MOQ 1 Ton Delivery Condition Forged +Rough Machined (Black Surface) Application scenario Train tracks, cranes, construction Processing Service Welding, Drilling, Cutting, Bending Packing Wooden pallet or according to customer's request Lead time 7 to 15 working days Payment terms T/T Quality Excellent
