Huatao Automatic Stacker

The polyester staple fiber machine (PSF plant) takes virgin PET Chips, recycled Bottle Flakes, Popcorn and Lumps, etc., as raw material, with continuous drying (or batch drying through Vacuum Dryer), high pressure melt spinning process engineering and VFD controlled Spinning & Stretching process engineering to produce normal Staple Fibre, High Tenacity Low Elongation Staple Fibre and Hollow Fibre. Single plant capacity is 15T.P.D. to 80T.P.D.
Equipment Technical Data
Titer Range dtex 6.67-16.67
Spinning Pos. nos. 6-24
Spinning Pitch mm 700, 750
Plant Capacity TPD 15-80
Spinneret dia. mm 328, 358, 410
Spinning Mechanical Speed m/min 500-1,500
Spinning Processing Speed m/min 500-1,300
Stretching Mechanical Speed m/min 240
Stretching Processing Speed m/min 230
Total Tow Titer at Stretching dtex 600,000-3,000,000
Stuffer Box Width mm 160-410
Cutting Length mm 25, 32, 38, 44, 51, 64, 76, 101
Bale Weight kg 200-350
Application:
Cushions Pillows Quilts Toys Jacket Mattress Non woven carpet Automotive felts, speaker felts, geo textiles, polyfill wadding, filter fabrics and other acoustics as well.

Spinning Line: Continuous Dryer Hopper Screw Extruder Polymer Pipe Filter Spin Beam (Meter Pump System, Spin Pack, Spinneret) Quenching Unit Interfloor Duct Draw-off Wall Capstan Roller Sunflower Gearing Unit Automatic Fiber Can Device

Drawing line: Can Creel Inlet Thread Guide Tow Guide Stand Dipping Bath 1st Draw Stand Draw Bath 2nd Draw Stand Draw Steam Chest 3rd Draw Stand Tow Stacker Crimper Steam Box Crimper Silicone Oil Sprayer Machine Tow Tension Stand Cutter Fiber Spreading Machine Relaxer Fiber Blowing system Baling Press

Automatic Stacker available breadth: 1400-2200mm

Specification:

Frequency conversion motor auto down stacker

Applicable to be production line whose max speed is 180m/min

Max sheet length: 3500mm, max stacking height: 1500mm

Connected with production management system, it can read order and change order, which make the orders apart correct and fast. it also can work by itself

Stacking of multi orders

Conveyer belt was separated to be 4 sections, driven by ac frequency conversion motor, running synchronized with the production line, it brings the suitable stack proportion according to the sheet length, which make paper board stack in good order

Transducer control the frequency conversion motor to drive the roller running speed up and down stably, board come out easily hard to be overturn

Transducer control the brake motor to drive the elevator with counterbalance speed up and down stably, speed counterchanges reasonably, make stacking more free and get rid of the paper board crease, improved the life of machine

Rolls forms close, and lift with elevator, to reduce the waste

Automatic Stacker available breadth: 1400-2200mm

Specification:

Frequency conversion motor auto down stacker

Applicable to be production line whose max speed is 180m/min

Max sheet length: 3500mm, max stacking height: 1500mm

Connected with production management system, it can read order and change order, which make the orders apart correct and fast. it also can work by itself

Stacking of multi orders

Conveyer belt was separated to be 4 sections, driven by ac frequency conversion motor, running synchronized with the production line, it brings the suitable stack proportion according to the sheet length, which make paper board stack in good order

Transducer control the frequency conversion motor to drive the roller running speed up and down stably, board come out easily hard to be overturn

Transducer control the brake motor to drive the elevator with counterbalance speed up and down stably, speed counterchanges reasonably, make stacking more free and get rid of the paper board crease, improved the life of machine

Rolls forms close, and lift with elevator, to reduce the waste

Gross power: 30kw

Product introduction:

1.This equipment is used to collect bare PCBs at the end of SMT production line

2.Stable and reliable PLC control system;

3.Easy to operate LED touch screen control interface;

4.Uninterrupted loading;

5.Machine always fault monitoring;

6.Optional pass working mode;

7.Smooth and parallel width adjustment(Stainless steel leadscrew);

8.Small volume design for space saving;

9.SMEMA port is compatible;



Technical parameters





Function

This equipment is used to collect bare PCBs at the end of SMT production line



PCB thickness

Min0.6mm





MAX PCBs capacity

300pcs(0.6mm thickness PCB)

Cycling time

Approx 8 seconds

Transport direction

Left to right/right to left(optional)

Transport height

900±20mm(or customized)

Air pressure

4-6 bar, MAX10L/minute

Power supply

100-230V AC(customized) single phase, MAX 300V/A

If you want more information ,feel free to contact us .Email :monica@szhonreal.com ,

I-1. Main Parameters
Model MJKC-2200 MJKC-1800
Max machine speed 80 ~ 150 pieces/min 80 ~ 150 pieces/min
Max feeding size (L * W) 2200*880mm 1800mmX600mm
Min feeding size (L * W) 600*230mm 450mmX170mm
Min slotting interval Negative knife (A * B) 175mmX60mm 150mmX50mm
Positive knife (A * B) 90mm*90mm 80mmX80mm
Min height of box (H) 115mm 70mm
Machine size 4.7*4.5*2m 2.8*2.5*2.0m

II. Introduction
This machine adopts the vacuum adsorption auxiliary leading edge feeding system feeding mode. Automatic feeder.
It has the function of slotting, chamfering, dividing edge and rolling line of corrugated board at one time. The machine and slotting depth are all electrically adjusted, and the scale reading is attached. The slotted phase adjustment mechanism is a planetary gear structure, which adopts an electric computer-type 360-degree adjustment, and the upper and lower slotted cutter heads and the pressure roller are synchronously moved left and right. (Note: special tools adjust the left and right movement), which is convenient to use and maintain, small and exquisite, It is a professional equipment for slotting and forming small cartons.
1. The slotting blade head is made of all-steel parts. The slotted cutter adopts a sawtooth curved semicircular cutter to cut the chip and remove the chip. After the slotting is completed, the cardboard enters the paper separation shaft, and the paper separator cuts the two sides of the carton neatly. (Note: The pressure roller and the paper cutter are installed on the same axis for easy adjustment.)
2. After the cardboard slotting, chamfering, pressing line and dividing edge are completed, it is exported by the six conveying shafts of the paper exiting part of the equipment,
3. This machine is equipped with a frequency converter (can be adjusted freely and slowly).

METAL ROOF TILE PRODUCTION LINE
Uncoil and uncoil car
Feeding unit
Rollform unit
Pressing unit
Fly cutting unit
Stacker and stacker car
Electric control unit(SIEMENS)
Fully automatic roof tile machines with metal presses in tile appearance in desired sizes. Our components used on the lines are selected from fully European and Turkish well known brands.
For additional information, technical documents or price information you can send E-Mail.

Widely used in Plywood/Particle board/Doors/Flush Doors production line. It could save labor cost and increase production capacity. All wood edge trimming process is controlled by Servo System Automatically. Provided with Scorer having automatic cutter for Fine/Sharp Cutting (Clear the Chipping). Automatic edge cutting and automatic stacker It Can cut plywood size from 2.5 ft to 4.5 ft x 5 ft to 8 ft and gives quality edge cutting.

PLC Control Automatic Parallel Paper Tube Making Machine
The machine is used for producing parallel paper tubes automatically. It consists of paper stand, paper edge grinding device, gluing device, paper cutting device, tube forming, tube discharging device, and a simple slanting stacker. The machine is equipped with Siemens PLC, Inverter. 2PCS mandrel is with machine.

Technical parameter:
Parameters:
Model SANPT16-50
Max. Size of jumbo paper roll 1020 mm X 1300 mm (Width*Dia.)
Max. Paper tube length 1200mm,1600mm,1800mm
Paper tube inner diameter 16 - 50 mm
Paper tube thickness 2-10 mm
Paper gram mage 200-550 gsm
Production speed 23-26/min