Wide Range Of Tapes

Butyl Rubber, or IIR, is an abbreviation for Isobutylene Isoprene Rubber with good chemical stability and thermal stability. The most prominent performance is the air tightness and water tightness.Its air transmittance is only 1/7 that of natural rubber, 1/5 that of styrene butadiene rubber, and the vapor transmittance is 1/200 that of natural rubber, 1/140 that of styrene butadiene rubber. Gas is even difficult to penetrate the material, not to mention water.Its outstanding weatherability, according to the relevant test data, can reach 120 high and -40 low. Report done by China's Building Waterproof and Zero Point Consulting Survey done says building waterproof leakage rate is as high as 90% in China. Many large enterprises have set up repairing departments. And in this process, the repairing products acrylate and butyl tapes are rapidly popular. 1. Flashing tape Waterproof:correctly paste butyl tape with roller compaction can be perfectly waterproof , because butyl tape is a pressure sensitive tape. 2. Waterproof tape Air tightness:The characteristics of butyl rubber determine that the air tight performance of butyl rubber tape is very good 3. Flashing butyl tape Reflective: The Flashing butyl tape can be used for the connection of reflective materials.Flashing butyl tape will not reduce the reflective performance of the material. 4. Butyl flashing tape Durability: Butyl flashing tape is an inert material with a service life of 50 years 5.Weather flashing tape Wide temperature range: Weather flashing tape can resist high temperature 120 , low temperature minus 40

PTFE adhesive tape with release sheet All VEIK PTFE tapes are manufactured by coating one side of our high quality teflon fabric with pressure sensitive silicone adhesive.These products are designed to withstand operational environments of up to 260 deg C(500F), and they can be used in direct contact with food. Our tapes come supplied with a convenient yellow release liner fro wasy installation. Features : All dimensions can be customized. 1. Non stick PTFE materials prevent the build up of molten film and plastic on its surface. 2. The temperature resistant PTFE coating allows high and low operating temperatures. 3. A yellow corrugated release liner is used on our PTFE tapes providing fast and easy removal. 4. Manufactured in varying thicknesses to cover a wide range of applications our PTFE tapes are of the highest quality available in today's market.

Adhesive backing high quality butyl tape sealant High Elasticity Butyl tape and its solutions Butyl tape is a type of adhesive sealing tape that has a wide range of applications. The tape comes in single- and double-sided versions, and is used in the construction and repair industries more than in any other industry. The tape offers unusual properties that other forms of tape and sealant cannot provide. The main advantage of butyl tape is that it combines the adhesive power of tape with the sealing power of caulk and other sealing products. Roofing One of the original uses for butyl tape is for roofs. The tape protects and seals cracks, seams and even small holes on the surface of a roof. In most cases, the tape works best on smooth, dirt- and grit-free roofs. The tape can hold many types of roofing together, such as metal, vinyl, asphalt, cement and tar paper. Even though the tape is strong and flexible, it's not designed to hold large areas of roofing together. Vents Butyl tape can be used on all vents leading from the inside of a building to the outside. The tape works to block the space between the wall and the vent, preventing air flow from entering or exiting the building around the vent and keeping moisture from entering the building. Butyl tape is especially useful around roof vents. Pipes In some cases, butyl tape will also work as a waterproofing tape for pipes. Unless the leak is extremely small, however, butyl tape works best as a temporary fix. When working with pipes, ensure that the surface of the pipe is clean and dry before applying the tape, which works best when several layers are wrapped around the trouble area. Butyl tape also works as a containment for other sealants such as silicone sealant. Windows and Glass Automotive Butyl tape is wide use on automotive to effectively secure the wire harnesses and the cables which are employed in any automotive installation. It designed to stick to any substrate and to fasten wires to metal panels such as the kick panels, door panels, and instrument panels, as well as to the back of the headliner and the pillar trim in the vehicle interior. This is an extruded butyl material that features excellent adhesion properties, ensuring that the wires and cables are properly secured. Air condition Butyl tape is impermeable to air and used in many applications requiring an airtight rubber. Usually, butyl tape for air conditioner usage is sheets. Butyl tapes used on air-conditioned is popular in Japan these years due to its character of environmental. In another way, butyl tape has good cushion function that other tapes can not provide.

Jacobs 31 tape has a stable and abrasion - resistant rubber backing. it is widely used for repairing jackets of buried and mining cables, because the cables are often exposed in easily worn envornments, their orginal jackets are often worn and need to be repaired. the tape has good softness and good moisture resistance. Application Range Repairing jackets of cables and mining cables. waterproof and insulation protection for connections of cumminication equipmentbase station, antenna and feeder waterproof and sealing of terminaland joint of comuunication cables. waterproof, insulation and sealing of overhead wire connection and branch clamp waterproof of buried cables Product Features Good Softness Good Moisture Resistance Good stability and wear resistance Specification 2.0mm (T) X 50.8mm (W) X 2.6mm (L)

Shenzhen Dowell Adhesive Products Co.,Ltd Product introduction: High temperature polyester tape, high temperature tapes are made from PET as backing material, then coated with high temperature resistance of silica gel, the overall heat resistance can reach 220�¢?? Celsius for 30 minutes, has good high temperature resistance, electrical insulation, chemical resistance, high adhesion, soft break and no residue leaving again to tear away from features such as widely used in circuit board dipping process, protection of circuit board, to prevent the plating solution and pollution, easy tear up, no adhesive residue, good ductility, friction resistance, good adhesive tape is the PCB protection.

ANTI-SPLASH TAPE USED IN MARINE & OFFSHORE Anti-Splash tape is constructed of an aluminum or glass cloth laminate coated with a high temperature silicone adhesive. Anti-Splash tape is enhanced with a fire retardant (self-extinguishing) adhesive layer. At the same time, it is also water resistant. In addition, the maximum working temperature of tape is up to 150 °C. It is designed to prevent hazardous liquids (oil/fuel) spraying outs or leaking from tubing systems. These liquids can cause extremely dangerous situations like fires, explosions or other dangerous situations. Anti-Splash tape is widely used to wrap around tubing, hoses, fittings, flanges, and valves in the marine and offshore industry. COMMON SPECIFICATIONS IMPA Code Width (mm) Width (inch) Length (m) Roll/Box 871801 35 1.38 10 28 871802 50 1.97 10 20 871808 75 2.95 10 12 871804 100 3.94 10 12 871803 140 5.51 10 7 871804 250 9.84 10 4 871805 500 19.68 10 2 871806 1000 39.37 10 1 PHYSICAL PROPERTIES AND PERFORMED TESTS Total thickness 9.5 mils Colour Silver Max. temperature Up to 150 °C (300 °F) Pressure 300 psi Tensile strength 93.2 lbs. per inch (ASTM-882) Adhesion Above 1000 grams, 25 mm g/f Adhesion to steel 5.8 lbs. per inch (ASTM-33330) Aging properties Indefinite shelf life when properly stored INSTALLATION STEPS Three steps to install anti-splash tape on the flange. Steps for installing anti-splash tape on the flange Three steps to install anti-splash tape at the junction of the two pipes. Steps for installing anti-splash tape on pipes This picture shows the different conditions before and after using anti-splash tapes. Different conditions before and after using anti-splash tapes

Masking tape the main material are crepe paper and acrylic adhesive, it is widely used in nounting printing plates, decoration, painting and a multitude of other uses. It could be peel off easily and leaves no residue. The width and length could be according to clien

Function-oriented fastening tape has been special processed on its loop side or hook side to emphasize its durable, good-hand feeling, and so on. Based on different procession, it can be classified intoö soft-hook tapeö, ômushroom hookö , ônon-brushed loopö ôhook & look combineö , ôflame-retardant tapeö and ôanti-microbialö fastening tape has been treated with chemical additives (anti-microbial or flame-retardant additive) to expand its usage. With safe and environment-friendly features, it increases widely applicability in various products. Flame retardant glue coated and wahsing durable pass the frame-retardant experiment of far25.853 (b) and fmvss-320

POLYKEN 930 is a cold applied tape coating system designed for the corrosion protection of field joints, fittings, and specialty piping. The unique adhesive retains conformability over a wide temperature range, yet exhibits an elevated level of shear resistance, which is a key in-ground performance characteristic. Coupled with a pliable, very malleable polyethylene backing, this versatile tape system can be applied by hand or with a wrapping machine. Ordering Information POLYKEN 930 coating tapes are in roll form. Eg.: POLYKEN 930-35 BLK 4"Ã?50' Total tape thickness:35mils(0.89mm),50mils(1.27mm) Tape width :2"(50mm),4"(100mm),6"(150mm),9"(228mm),12"(305mm)18" (457mm) Tape roll length:50ft(15M),100ft(30M)