Large Flow Low Head Vertical Axial Flow Pump

General
ZLB vertical axial flow pump is a new generation of small and medium-sized axial flow pump developed by our company. This pump head is low, the flow is large,this series of products has a wide spectrum,good hydraulic performance and novel structure,it is characterized by high efficiency,good cavitation performance,easy installation and maintenance;and the same time,combined with the latest information control technology,the intelligent water pump system independently developed can be configured,with automatic monitoring function,the design,manufacture,and quality of this series product meet the standard of GB/T13008 Technical condition for mixed-flow pump and axial-flow pump

Application
This series of products can be used for clean water or other liquids with physical and chemical properties close to water whose temperature of conveying medium is no more than 50.They are widely used in large-scale water conservancy projects, farmland irrigation,industrial conveying water,The thermal power station carries circulating water, shipyard level,urban water supply and drainage and water diversion projects

Working condition
The medium:clear water,rain water,river water,sewage waste water,any of various liquids whose physicochemical properties resemble those of water
 Medium temperature: 50
Running mode: power frequency or frequency conversion
Direction of rotation:from the drive end,the pump is rotated in clockwise
Installation:vertical single foundation,vertical double foundation


Structure advantages
1.Guide bearding
Standard with high quality rubber guide bearings with small friction coefficient, vibration absorption and especially suitable for axial flow pump
The lower guide bearing adopts lengthened structure with better length-diameter ratio, which greatly improves the stability of rotor parts;
Designed with enough lubricating flume,and good cooling lubrication effect
2.Outlet bending tube
Precision casting,reasonable radius of curvature,internal passage smooth transition,performance optimization
The design of the multi-rib structure increases the strength and the rigidity of the body
Reasonable hoisting hole design,convenient hoisting
3.Impeller chamber
Precision casting,internal passage smooth transition,performance optimization
Half structure for easy maintenance

Overview
QZ series submersible axial flow pump is a new generation of submersible axial flow pump products independently developed by our company,it is not only simple in structure,easy to disassemble and assemble,but also has excellent performance as an alternative to traditional axial flow pump.
This QZ series of products has a wide spectrum,good hydraulic performance and novel structure.it is characterized by high efficiency,good cavitation performance,easy installation and maintenance,at the same time,combined with the latest information control technology,the intelligent water pump system independently developed can be configured,with automatic monitoring function.
The design,manufacture,and quality of this series product meet the standard of GB/T13008 Technical conditions for mixed-flow pump and axial-flow pump JB/T Large and medium-sized submersible motor-pumps

Application
This series of products can be used for clear water or other liquids with physical and chemical properties close to water whose temperature of conveying medium is no more than 43â??. They are widely used in municipal engineering, large-scale water conservancy projects, farmland irrigation,industrial conveying water.The thermal power station car-ries circulating water.Shipyard level,urban water supply and drainage and water diversion projects

Working condition
The medium:clear water,rain water,river water,sewage waste water,any of various liquids whose physicochemical properties resemble those of water
Rated voltage:380V or 660V 3KV 6KV 10KV,etc
Medium temperature: 43
Starting mode : soft start or frequency conversion
Direction of rotation:from the drive end,the pump is rotated in clockwise

Product features
High-efficiency energy saving: the hydraulic model is designed by 3-D flow theory and calculated by CFD computational simulation,with the best performance in theory. Hydraulic components are made of metal mold,cast precisely guide blade mould is machined by CNC;guide blade shell and suction cone blank are cast by resin sand,solid flow channel is completely in accordance with design drawings,with efficiency higher, and wide high efficiency zone
High reliability:the design of the inlet flow channel is reasonable, the inlet water is uniform without vortex, with smooth running, the absolute concentricity o the pump shaft, and the excellent static balance of the rotor parts ensure that the pump has low vibration and low noise when running at high speed
Advanced technology:all parts using metal mold,precision casting,parts quality is reliable
Low maintenance: reasonable structure,convenient assembly and disassembly, and simple maintenance
Inventory management: reasonable inventory management,short lead time,fast delivery
Automatic monitoring: Equipped with intelligent water pump system independently developed,with automatic monitoring function

General
ZLB vertical axial flow pump is a new generation of small and medium-sized axial flow pump developed by our company. This pump head is low, the flow is large,this series of products has a wide spectrum,good hydraulic performance and novel structure,it is characterized by high efficiency,good cavitation performance,easy installation and maintenance;and the same time,combined with the latest information control technology,the intelligent water pump system independently developed can be configured,with automatic monitoring function,the design,manufacture,and quality of this series product meet the standard of GB/T13008 Technical condition for mixed-flow pump and axial-flow pump
Application
This series of products can be used for clean water or other liquids with physical and chemical properties close to water whose temperature of conveying medium is no more than 50.They are widely used in large-scale water conservancy projects, farmland irrigation,industrial conveying water,The thermal power station carries circulating water, shipyard level,urban water supply and drainage and water diversion projects

Working condition
The medium:clear water,rain water,river water,sewage waste water,any of various liquids whose physicochemical properties resemble those of water
Medium temperature:50
 Running mode: power frequency or frequency conversion
Direction of rotation:from the drive end,the pump is rotated in clockwise
Installation:vertical single foundation,vertical double foundation


Structure advantages
1.Guide bearding
Standard with high quality rubber guide bearings with small friction coefficient, vibration absorption and especially suitable for axial flow pump
The lower guide bearing adopts lengthened structure with better length-diameter ratio, which greatly improves the stability of rotor parts;
Designed with enough lubricating flume,and good cooling lubrication effect
2.Outlet bending tube
Precision casting,reasonable radius of curvature,internal passage smooth transition,performance optimization
The design of the multi-rib structure increases the strength and the rigidity of the body
Reasonable hoisting hole design,convenient hoisting
3.Impeller chamber
Precision casting,internal passage smooth transition,performance optimization
Half structure for easy maintenance

4.Thrust bearding unit
Under conventional working condition,the heat radiation rib of the outer circle radiates heat,so that the external water receiving difficulty in the field is solved
Under special working conditions,increase the heat radiation of the coil to ensure that the unit runs for a long time
Equipped with on-line vibration measurement and temperature measurement device to ensure safe running

General
ZLB vertical axial flow pump is a new generation of small and medium-sized axial flow pump developed by our company. This pump head is low, the flow is large,this series of products has a wide spectrum,good hydraulic performance and novel structure,it is characterized by high efficiency,good cavitation performance,easy installation and maintenance;and the same time,combined with the latest information control technology,the intelligent water pump system independently developed can be configured,with automatic monitoring function,the design,manufacture,and quality of this series product meet the standard of GB/T13008 Technical condition for mixed-flow pump and axial-flow pump

Application
This series of products can be used for clean water or other liquids with physical and chemical properties close to water whose temperature of conveying medium is no more than 50.They are widely used in large-scale water conservancy projects, farmland irrigation,industrial conveying water,The thermal power station carries circulating water, shipyard level,urban water supply and drainage and water diversion projects

Working condition
 The medium:clear water,rain water,river water,sewage waste water,any of various liquids whose physicochemical properties resemble those of water
 Medium temperature: 50
 Running mode: power frequency or frequency conversion
Direction of rotation:from the drive end,the pump is rotated in clockwise
Installation:vertical single foundation,vertical double foundation


Structure advantages
1.Guide bearding
Standard with high quality rubber guide bearings with small friction coefficient, vibration absorption and especially suitable for axial flow pump
The lower guide bearing adopts lengthened structure with better length-diameter ratio, which greatly improves the stability of rotor parts;
Designed with enough lubricating flume,and good cooling lubrication effect
2.Outlet bending tube
Precision casting,reasonable radius of curvature,internal passage smooth transition,performance optimization
The design of the multi-rib structure increases the strength and the rigidity of the body
Reasonable hoisting hole design,convenient hoisting
3.Impeller chamber
Precision casting,internal passage smooth transition,performance optimization
Half structure for easy maintenance

4.Thrust bearding unit
Under conventional working condition,the heat radiation rib of the outer circle radiates heat,so that the external water receiving difficulty in the field is solved
Under special working conditions,increase the heat radiation of the coil to ensure that the unit runs for a long time
Equipped with on-line vibration measurement and temperature measurement device to ensure safe running

Mobile Compact Desalination Plant
Seawater~Fresh water. No Chemical/Low Energy Consumed
Origin: Malaysia
Capacity: 50m3D ~ 5,000m3D
Packing: 1 x 20' ~ 1 x 40' FCL
Price: Reasonable
Delivery & Installation: 3 months

Molasses Turnkey Project Alcohol/Ethanol Plant
We professional manufacture of ethanol alcohol equipment ,DDGS ,equipment ,vine gare equipment in China. The material can be
corn(maize) ,wheat,potato,cassava,molasses,beetroot,or any other material which contains starch or sugar .we sell our products to more than 20 countries all over the world. Now our main products are as follow :
1.Turnkey ethanol /alcohol plant project which can produce 95% -96% food grade alcohol,medical alcohol,reagent grade anhydrous ethanol/alcohol or 99.8% fuel grade anhydrous ethanol .Output can be from 1000LPD to 2million LPD .
2.DDGS protein feed equipment ,feed drying equipment .
3.Waste water environmental process equipment
4.Design and manufacture ethanol/alcohol equipment according to customers inquired or drawing .

Alcohol ethanol material can be corn(maize), wheat,potato,cassava,molasses,beetroot or any other material which contains starch or sugar. we offer :
1. Turn key alcohol plant projects which can produce 95% -96%food grade alcohol ,medical alcohol,reagent grade anhydrous alcohol or 99.8% fuel grade anhydrous ethanol.Output can be from 1000LPD to 2millionLPD.
2. Alcohol by-product liquid CO2 cycle equipment, fusel oil separation and purification technology and equipment.
3. DDG protein feed equipment, DDGS protein feed drying equipment.
4. Micro alcohol distillers or brewery that can be used at home or restaurant or hotels
5. vinegar equipment.
6. Waste water environmental processing equipment.
7.OEM service. Design and manufacture alcohol ethanol equipment according to customers requirements or drawings.
pls contact us.