Ethernet Cellular Gateway

LoRa gateway S281 uses LoRa RF communication technology to transmit equipment data from multiple points in a discrete distribution to the gateway through wireless LoRa nodes, and the LoRa gateway processes the data and transmits it to the server through Ethernet or 4G network, thus realizing remote data acquisition and monitoring. LoRa gateway supports a variety of wireless LoRa nodes, including temperature&humidity, weather, soil, gas, RS485 to wireless module nodes. Support access to the cloud, can realize history record query, high and low temperature over limit abnormal alarm, support voice, WeChat, SMS, APP, WEB monitoring platform, email and other ways to alarm. Widely used in heating, greenhouse planting, breeding, workshop, warehouse, fresh, flow, liquid level, mine and other industries.

1. Support 50 wireless temperature&humidity, relay, digital input, soil, weather and other types nodes;
2. Support 50 RS485 serial wireless module nodes;
3. Monitoring radius up to 2KM;
4. Support 10 user numbers for receiving specific SMS alarm messages for device daily reports, dropouts, serial data overruns, and abnormal triggers;
5. Real-time monitoring of terminal battery power to ensure that device data is not dropped;
6. Using local configuration software, remote SMS and APP to set parameters, easy to operate and use.

INTERFACES DC POWER INPUT
10-30V Wide DC input @1A (non-isolated)
Accidental reverse voltage, ESD (IEC61000-4-2 level 4), EFT (IEC61000-4-4 level 2) and Surge (IEC61000-4-5 level 1) protected.
Internal Overvoltage, Over current protection
Internal circuitry to enable remote power ON/OFF of 12V rail.
Connection by means of 2 piece pluggable screw terminal connector CELLULAR INTERFACE
â?¢ Based on Sierra Wireless Module
â?¢ LTE CAT4 cellular connectivity with UMTS/GPRS fallback
Following key features of the Module
o 4G LTE CAT4 : B1 / B3 / B5 / B8 / B40 / B41
o 3G UMTS/HSPA+: B1/ B8
o 2G EDGE/GSM/GPRS: 900/ 1800 MHz
Interfaces
o Two SMA connectors for External Main and Diversity Antennas
o Single Nano SIM USB INTERFACE
Micro USB interface for connecting Host. GPS
Supports RF bands of GPS, GLONASS, Galileo, BeiDou
â?¢ SMA connector for External Antenna (Main and Diversity)
â?¢ Supports active or Passive GPS Antenna by assembly option
â?¢ 3.7V at 20mA available for supporting active antenna
RS-485
â?¢ 3KV isolated Half duplex RS-485 channel
â?¢ ESD (IEC61000-4-2 level 4), EFT (IEC61000-4-4 level 2) and Surge (IEC61000-4-5 level 1) protected.
Connection by means of screw terminal connectors EMMC FLASH
4GB eMMC flash for Internal Data storage

"FAMAGA Group OHG, the global supplier of industrial equipment and spare parts, is glad to provide encoders by Ethernet Gateways for the SIMATIC IBH Softec:

We supply a complete range of the manufacturerâ??s catalog, including the following items:

Ethernet Gateways for the SIMATIC 20266
Ethernet Gateways for the SIMATIC 20220
Ethernet Gateways for the SIMATIC 20284
Ethernet Gateways for the SIMATIC 20268
Ethernet Gateways for the SIMATIC 1150

Our company is also pleased to offer products of other brands:
Bei Sensors
IBH Softec
Schmersal
BALLUFF
Pepperl+Fuchs
Bernstein
Di-Soric
Elobau
Univer
Eltra
Aventics
FESTO
Camozzi
Euchner
END-Armaturen
TAMAGAWA
SENECA
Airtac
Murrelektronik
Azbil Yamatake
FRANKE-Filter
Endress+Hauser
IFM
Ipf Electronic
Kieback & Peter
MD Micro Detectors
Bihl Wiedemann
ANDERSON-NEGELE
KITAGAWA
Georg Schlegel
Metal Work
Kipp
Allen-Bradley
Netter Vibration
Kuebler / K�¼bler
RAFI
LINDY
4B Braime
SOUTHCO
ELGO Electronic
FAG
RECO
Pilz
AIRTEC Pneumatic
COMITRONIC-BTI
L�¼tze
Hydac
Barksdale
Keyence
AirCom Pneumatic
Garlock
Mac Valves
MAHLE (Filtration Group)
Riegler
Baumer
Elreha
Sick
Siko

FAMAGA Group OHG is a family-owned company with many years of experience in the supply of components and spare parts for industrial enterprises around the world.

Our mission is to provide fair prices, reducing the cost of production for our customers.

A significant network of suppliers around the world allows us to supply any equipment, which client needs on favorable terms.
Therefore, the list of equipment we provide is tenfold greater than the catalog presented on this site.
You are welcome to check the full catalog on our website."

Industrial design, stable and reliable, suitable for harsh environment;
Support 4, 8 and 16 digital DO outputs, widely used;
DO1 supports PWM high-speed pulse output, frequency: 10Hz ~ 300KHz;
DO2 can be used to control the direction output of stepper motor and servo motor;
1 RS485 supports Modbus master and slave protocol for expanding IO or HMI;
One RJ45 Ethernet interface supports TCP Server and TCP Client services;
Support Modbus TCP and MQTT protocols, can access SCADA, MES and cloud platforms;
As a TCP server, it can support 5 TCP links at the same time.

The Cellular IoT RTU is an industrial class, high reliability, high stability, and programmable Remote Terminal Unit (RTU). It embedded 32-Bit High Performance Microprocessor MCU, inbuilt industrial Cellular module. It provides 8 digital inputs, 6 analog(ultra high 24 bit resolution) or PT100 Resistance Temperature Detector (RTD) inputs, 4 relay outputs, 1 ambient sensor input for monitoring onsite temperature and humidity, 1 Ethernet RJ45 port for connect internet WAN or LAN, supports dual nano sim card, with 2 RS485 serial port, supports 224 mapping registers via Modbus RTU protocol. It can monitoring and operates the I/O ports by SMS, APP, Web Server, internet, timers and programmed inter-lock events automatically.

ï??Provide 1-8 E1 channels interface transparently, confirming to ITU-G.703.
ï??High transmit efficiency, low transmit delay.
ï??Provide 4*E1 channels and 2*10/100/1000Base-TX and 1*1000Base-X interface.
ï??The length of Ethernet packet can be set, supporting huge packet.
ï??User can select IP protocol encapsulation or simplicity Ethernet type.
ï??Support VLAN setting.
ï??Support Ethernet ping function.
ï??Support package loss indicator function for E1 transmission line.
ï??Local and remote E1 loop and local E1 enable function.
ï??Point to point or point to multi-points connections, satisfying different applications.
ï??High efficiency transmission, up to 90% bandwidth utility ratio.
ï??Support two type interfaces-75�© and 120�©-unneed setting.
ï??10/100/1000M Ethernet, full/half duplex auto-adapt, support auto-MDIX.
ï??When selecting network adaptation clock, it can resume the original clock accurately through TDM clock resumption mechanism, stable clock, little jitter and small excursion, conforming to ITU-T clock jitter and excursion standard.
ï??The device Support WEB management platform, online software upgrades, the host side can manage the work of each state machine equipment;

Model noï¼?S281

The Lora Gateway S281 is the latest Lora technology for industrial internet of things solutions. It supports upto 99 wireless temperature humidity modules, and 99 wireless serial port modules with a monitoring radius of upto 2500m.it is widely used in agricultural greenhouse temperature and humidity collection and monitoring, chemical plant temperature and humidity collection and monitoring, electroplating plant temperature and humidity collection and monitoring, hospital sites and fruit and vegetable storage warehouses and other places temperature and humidity collection and monitoring. Supports SMS,GPRS,3G, 4G Lte Cellular Networks.Compatible Modbus TCP and MQTT IoT Protocols and can intergrate to the KPIIOT IoT Cloud Platform and OPC, SCADA and MES systems to build an industiral IoT Solution.

The Dual Sim card Cellular IoT Modbus RTU is design for working in the harsh industrial application environment, converting Modbus TCP/RTU to SMS and cloud platform. widely used in a variety of industrial automation, security monitoring system, automatically measurement and control system, BTS monitoring, remote data acquisition, telemetrically systems, automatically control system. It can be used as a remote switch, remote I/O, remote smart PLC, timer switches. Supports SMS,GPRS,3G, 4G Lte Cellular Networks.Compatible Modbus TCP and MQTT IoT Protocols and can intergrate to the KPIIOT IoT Cloud Platform and OPC, SCADA and MES systems.

High-performance industrial-grade cellular router adopts 32-bit processor, developed based on Linux system, supports GSM/2G/3G/4G/GPRS/EDGE/WCDMA/HSPA+/LTE network, provides high-speed wireless network bandwidth for the device through wireless connection, and has automatic detection of network disconnection, automatic restart of dial-up failure, and scheduled restart to ensure network Stable connection.