Pre-Filled Paint

Mars is the premium quality interior emulsion paint having following features :
Pleasant look for walls Rich, thick paint that provides a beautiful finish.

Venus is the premium quality emulsion paint for exterios walls. It have following features :
High build formula provides for for extreme hide and coverage for fewer coats
Outstanding durability against even the harshest weather conditions
Lifetime Limited Warranty

ALPHA wall primer is the premium quality base coat for both interior and exterior walls. It have following features ;
High build formula provides for for extreme hide and coverage for fewer coats
Outstanding durability against even the harshest weather conditions

KRACK-a- SEAL is a ready to use fiber glass reinforced crack filling paste for both interior and exterior surfaces. It ensures unmatched crack bridging ability for plaster cracks of up to 4 mm.

Minimum Order Size and Packgaing details

MOQ 15 ton

Feature: Reinforcement of Waterproof
High heat insulation
Good quality and dust resistance
Water resistance and high weather durable.
Drying faster and easy application.

Application
Cement wall
Galvanized steel
Color pre-painted steel
Plywood
Plastic wave-board
Lime-wall
The coverage will be affected by substrate
dimension and application method.
The loss factor as follow -
Brush= Theory coverage X1.4
Spray= Theory coverage X1.7

DESCRIPTION
CC-404 is a two component, high performance, pre filled epoxy grout , suitable for use as a pourable or fluid grouting material. Aftek F4 and F6 fillers may be added to produce a trowellable high build mortar or a pourable flowable grout.

FEATURES
â?? High flow properties
â?? Bonds to damp substrates
â?? Rapid hardening and strength gain
â?? High chemical resistance
â?? Pre-measured kits make for ease of use
â?? High tensile and compressive strength
â?? 100% solid epoxy
â?? Excellent adhesion to most substrates
â?? Cures at temperatures down to 5oC
â?? Negligible shrinkage
â?? High mechanical strength
â?? Solvent free High early strength

PACKAGING
CC-404 is available in 3 litre and 15 litre kits

PRODUCT INFORMATION

PRODUCT NAMEâ?¡ Sequoia 3000 Gloss Finish

DESCRIPTION Sequoia 3000 Gloss Finish is a premium solvent based high gloss finish, it is an oil-modified alkyd enamel
paint. It is easy to apply and forms a smooth, tough paint
film which has excellent gloss, fungus resistance and
durability.

USAGE For decoration and protection. Suitable for all types of
interior and exterior metal and wood surfaces

BENEFITS High gloss and excellent gloss retention
Excellent gloss fastness
Excellent durability
Washable

PACK SIZE 1 litre, 5 litres

COLOUR RANGE Refer to Sequoia 3000 Gloss Finish colour chart

PERFORMANCE GUIDE
CHEMICAL RESISTANCE
Resistant to mild chemical fumes. Special paint systems
required if surface is subject to constant chemical attack
HEAT RESISTANCE
Generally resistant to heat up to 0c. Discolouration will
occur after a prolong time if surface is constantly heated
WATER RESISTANCE
Resistant to normal atmospheric humidity present. Will
withstand repeated washing. Not suitable for surface
immerse in water
THEORETICAL COVERAGE
16-18 meter2 /liter. Note: Surface coverage will alter depending on condition
of surface to be paint

PRE-APPLICATION
SURFACE PREPERATION Generally all surfaces to be coated must be free of dust, dirt, grease and other contaminants. If metal surface is contaminated with rust, sand the
surface with sand paper or wire-brush and clean of dust. For optimal performance, new galvanized surface should be cleaned and degreased to ensure good adhesion

PREVIOUSLY PAINTED SURFACEâ?¡All loose and flaking paint film must be removed. Surface must be free of dust, dirt, grease and other contaminants. If metal surface is contaminated with rust, sand the surface with sand paper or wire-brush and clean of dust.

RECOMMENDED PAINT SYSTEM
Types of Surface
Undercoat (1 coat) Finish (2 coats)
Wood REDWOOD white undercoat
Metal SEQUOIA
PROTECTIVE COATING OR NASA oxide
SEQUOIA 3000
GLOSS PAINT

PAINT APPLICATION THINNINGâ?¡ For normal use, thinning is not required. If required, add 1 part of white spirit (10%) to 10 part of paint. Note: Excessive thinning will affect the quality of the paint.
DRYTIME Touch dry : 2 hours
Hard dry/Recoat : 8 hours
CLEAN UP â?¡Clean all equipment with white spirit immediately afteruse. Allow empty container to dry prior to disposal.

PRODUCT DATA COMPOSITION â?¡Pigments: Lightfast organic pigment, lightfast inorganic pigment.
Blinder : Organic Alkyd
Solvent : White spirit