Pk1209 Automatic Cutting System

The polyester staple fiber machine (PSF plant) takes virgin PET Chips, recycled Bottle Flakes, Popcorn and Lumps, etc., as raw material, with continuous drying (or batch drying through Vacuum Dryer), high pressure melt spinning process engineering and VFD controlled Spinning & Stretching process engineering to produce normal Staple Fibre, High Tenacity Low Elongation Staple Fibre and Hollow Fibre. Single plant capacity is 15T.P.D. to 80T.P.D.
Equipment Technical Data
Titer Range dtex 6.67-16.67
Spinning Pos. nos. 6-24
Spinning Pitch mm 700, 750
Plant Capacity TPD 15-80
Spinneret dia. mm 328, 358, 410
Spinning Mechanical Speed m/min 500-1,500
Spinning Processing Speed m/min 500-1,300
Stretching Mechanical Speed m/min 240
Stretching Processing Speed m/min 230
Total Tow Titer at Stretching dtex 600,000-3,000,000
Stuffer Box Width mm 160-410
Cutting Length mm 25, 32, 38, 44, 51, 64, 76, 101
Bale Weight kg 200-350
Application:
Cushions Pillows Quilts Toys Jacket Mattress Non woven carpet Automotive felts, speaker felts, geo textiles, polyfill wadding, filter fabrics and other acoustics as well.

Spinning Line: Continuous Dryer Hopper Screw Extruder Polymer Pipe Filter Spin Beam (Meter Pump System, Spin Pack, Spinneret) Quenching Unit Interfloor Duct Draw-off Wall Capstan Roller Sunflower Gearing Unit Automatic Fiber Can Device

Drawing line: Can Creel Inlet Thread Guide Tow Guide Stand Dipping Bath 1st Draw Stand Draw Bath 2nd Draw Stand Draw Steam Chest 3rd Draw Stand Tow Stacker Crimper Steam Box Crimper Silicone Oil Sprayer Machine Tow Tension Stand Cutter Fiber Spreading Machine Relaxer Fiber Blowing system Baling Press

Omniscient International, an ISO & CE certified manufacturer, supplies Brush Holders for Automatic Machines, built to support high-speed, precision operations in industrial automation. Crafted from durable brass or stainless steel with a golden or silver metallic finish, these brush holders ensure consistent brush pressure, stable electrical contact, and long operational life. Designed to perform in continuous-use environments, they are ideal for CNC machines, robotic arms, servo motors, packaging equipment, and other automatic systems. Available in standard and custom designs, we offer solutions tailored to OEM specifications and industry demands.

CNC cutting machine for cutting soft materials like fabric, and leather, etc., automatic oscillating knife cutting machine, Intelligent CNC, no need knife dies, reducing costs and increasing efficiency.

Table, wire cutting frames size depends on the rectangle or square soap block size

Raw Material Used: Cast Iron, Mild Steel and Stainless Steel if required

Hand Operated

Cuts soap blocks into slabs, slabs in to bars and bars in to cakes in three operation

Gives fine accurate cuts

Simple in operation and effortless cutting

Meant for mass production

Cutting operation performed by wire

Bearing & Double Gearing System for effortless feeding the soap toward the wire cutting frames

Extra wire cutting frames to buy for cutting various dimensions and grams of soaps

The whole Block is cut into Slabs in 1sttable wire frame, then spinning the pusher wheel for the Slabs on the machine table for 2nd operation to cut Slabs into Bars & by 3rd operation the bars will cut into Cakes of required size.

The mechanism for pushing the Soap forward is arranged by means of Rack & Pinion

The cut is clean and sharp

For smooth operation the gear arrangement is provided

Single Cutting Machine No. E-3 (Mild Steel)

Size: Standard.
Raw Material Used: Cast Iron & Mild Steel.
Hand Operated.
For Cutting Soap Slabs into Bars and Cakes.
Gives Fine Cuts
Simple in Operation and Use.
Cutting Operation Performed by Wire.
Bearing & Double Gearing System.
The mechanism for pushing the Soap forward is arranged by means of Rack & Pinion.
Wire Type Cutter is used for Toilet soaps, Oil Soaps, Laundry Soaps Manufacturers and other applicable industries.

Three Cutting Machine No. E-4 (Mild Steel Contact Parts)

Size: Standard.
Raw Material Used: Cast Iron & Mild Steel.
Hand Operated.
Cuts Soap Slabs into Bars and Cakes in Three Operation, Gives Fine Cuts, Simple in Operation and Use.
Meant for Mass Production.
Cutting Operation Performed by Wire.
Bearing & Double Gearing System.
The mechanism for pushing the Soap forward is arranged by means of Rack & Pinion.
Wire Type Cutting Machine is used for Toilet soaps, Oil Soaps, Laundry Soaps Manufacturers and other applicable industries

This range of Soap Cutting Machineries can be availed in single/double/three table based design choice and mechanical/manual controlling mode based specifications. These equipment comprise of standard components like PLC controller, servo drive, servo motor, electrical parts and angle encoder. All the contact accessories of these Soap Cutting Machineries are made of 304 grade stainless steel to maintain required hygiene. Belt conveyor type motor of these equipment requires 0.55 kW power to function. Offered in three phase design, these systems have long working life. Standard of these equipment has been verified on the basis of their service life, production method and user friendliness.

Raw Material Used: Cast Iron, Mild Steel & Stainless Steel

Hand operated

Cuts soap slabs into bars and cakes

Gives fine accurate cuts

Simple in operation and use

Easy to maintain

Cutting operation performed by wire

Bearing & Double Gearing System for hassle free feeding the soap toward the wire cutting frames

The mechanism for pushing the Soap forward is arranged by means of Rack & Pinion

The cut is clean and sharp

For smooth operation the gear arrangement is provided

Double Cutting Machine No. E-2 (Mild Steel Contact Parts)

Size: Standard.
Raw Material Used: Cast Iron & Mild Steel.
Double Cutting Machine is used for cutting Soap Slabs into Bars & Bars into Cakes respectively and also used for cutting finished
Bars in to Cakes of any length that may be required.
Machine is very easy in operation and simple to understand.
The whole Block is cut into Slabs by means of Hand Cutter No. F-3 (TEMPLATE) then put the Slabs on the machine table i.e. for
2nd operation to cut Slabs into Bars & by 3rd operation the bars will cut into Cakes of required size. The mechanism for pushing
the Soap forward is arranged by means of Rack & Pinion. The cut is clean and sharp. Gear arrangement is provided for smooth
operation.
Meant for Mass Production up to 5000 Kg.
Cutting Operation Performed by Wire.
Bearing & Double Gearing System.
Wire Type Cutter is used for Toilet soaps, Oil Soaps, Laundry Soaps Manufacturers and other applicable industries.