X-Ray Lead Protective Gloves

Safety Protection Disposable Nitrile Latex Gloves
50 pair in a box
Carton size : 60 x 50 x 27cm

Material - Nitrile Latex
Color- white, black, blue, pink, etc
Size - S, M, L, XL

Weight: 3.5-5.5grams
Length: 9.5'' and 12"
Thickness: 2.5mil-4mil

The intervention protective gloves with the best protective performance today,
In practical work, due to the limited conditions, the purpose of safe operation can not be achieved only by shortening the contact time and increasing the distance.

For example, a large 60 Co irradiation source is installed indoors, and the maximum distance from the staff is only a few meters. The dose equivalent at the staff may be more than 1 Xi / s, and it is dangerous to stay there for one second. Therefore, the above two methods are not applicable, and shielding protection must be adopted. Shielding protection is to add a layer of shield (weakening material) with sufficient thickness between people and radiation sources according to the principle that radiation is weakened when passing through substances, so as to reduce the external radiation dose below the control standard, so as to protect human safety.

The material used for shielding is determined according to different properties, types and output of rays, and its thickness is determined according to the control level. In external radiation protection, the above basic measures must be reasonably applied according to the actual situation. When solving specific protection problems, these measures are often used in combination. For external radiation protection, in addition to the above basic measures, it is also necessary to do a good job in the protection training of staff, monitor the working environment and personal dose, and shield or remove temporarily useless or redundant radioactive substances in time. In addition, any interaction between ionizing radiation and air will produce some harmful gases, such as ozone and nitrogen oxides. At the same time, substances (including air and dust) irradiated by high-energy charged particle beam, neutron beam or high-energy photon beam may also induce induced radioactivity.

Therefore, when applying external ionizing radiation sources, in addition to paying attention to the radiation protection of external radiation, corresponding other measures (such as ventilation) must be taken to prevent the damage of internal radiation, harmful gases and other harmful factors to human body

Camellia is a Vietnamese brand, it is all certified products such as FDA CE EU, Vietnam HBC, price guarantee can make up,

Latex Surgical Gloves Features:
1) Made from 100% Thailand Natural Latex
2) Latex surgical gloves for surgical/operation use
4)Sterilized
5)Packing: 1pair/pouch, 50 pairs/box, 10 boxes/outer carton, Conveyance:Qty/20â?² FCL: 430 cartons

Prince is a Malaysian FDA510 brand. It has factories in Malaysia and Vietnam. It can provide a considerable amount of NITRILE gloves each month, including medical and civilian use, and the quality fully meets the international and FDA, CE, EN and other standards.

Ansell Edge $ 15.30process (inclusive0.30 for buyer party

SOP For Ansell edge
Price $15.30 - 0.30
buyer team 70%
our team 30%

-Buyer to provide Loi, NCNDA, ICPO if intermediate company involved, POF if required
Within 1day
-Seller will provide FCO

-Buyer to give FCO Counter sign and provide ICPO

Within a day

*After signing SPA-Seller can show authorisation letter* (As requested to seller) in Zoom meeting
Spa signed by both party
Seller to provide PI
Same day of PI Shared

-*LC TRANSFERABLE, IRREVOCABLE, DIVISIBLE and REVOLVING at site*

Within 3 days
-LC needs to be open within 3 days

Within 5 to 7 working days after verification of LC
Allocation letter for complete order from manufacturer, along with required documents,
Schedule of the deliver is provided with quantity

-Material SGS to be intimated prior to buyer

-At buyer cost SGS for material done at the FOB Port Klang

-After SGS
LC cleared on the invoice value immediately

If seller or buyer FAILS to proceed the deal after signing SPA and opening of LC 2% penalty will be applied.

Ansell Edge $ 15.30process (inclusive0.30 for buyer party

SOP For Ansell edge
Price $15.30 inclusive $0.3 Commission

-Buyer to provide Loi, NCNDA, ICPO if intermediate company involved, POF if required
Within 1day
-Seller will provide FCO

-Buyer to give FCO Counter sign and provide ICPO

Within a day

*After signing SPA-Seller can show authorisation letter* (As requested to seller) in Zoom meeting
Spa signed by both party
Seller to provide PI
Same day of PI Shared

-*LC TRANSFERABLE, IRREVOCABLE, DIVISIBLE and REVOLVING at site*

Within 3 days
-LC needs to be open within 3 days

Within 5 to 7 working days after verification of LC
Allocation letter for complete order from manufacturer, along with required documents,
Schedule of the deliver is provided with quantity

-Material SGS to be intimated prior to buyer

-At buyer cost SGS for material done at the FOB Port Klang

-After SGS
LC cleared on the invoice value immediately

If seller or buyer FAILS to proceed the deal after signing SPA and opening of LC 2% penalty will be applied.

Hartalega Malaysian products

Price 12MX26 WEEKS
Payment Term 7% Deposit to Hartalega factory director 93% LC
ALLOCATION Hartalega 12MX26 WEEKS
Price $ 9.25+$0.20 buyer part $0.1 Seller Part $0.1

SOP

1. NCNDA LOI POF IMFPA SPA Signed invoice
2. 7%TT directly to HartalegaFactory
3. Delivery schedule
Full payment 2 weeks prior to each shipment, unless we provide up to Net90 payment terms, depending on our buyer's creditworthiness**

NOTE we're a distributor & can work it out with them._

FlowFlex and iHealth OTG USA

Los Angeles,
Flow Flex 1,10 million
I Health: 6 million!
2 New Jersey
Flow 3 million
I Health 1.8M


Price: 4.2+10%

SOP:
1, NCNDA, ICPO, SPA,
2. $5000 for Lawyer trust or Escrow
3. Inspection Pay