Three Phase Multiprocess Welder

Operating principle:
The purpose of separation is to separate out substances with different mass ratios from mixed fluid.Separation forms included solid-liquid separation,liquid-liquid separation and liquid-liquid-solid separation.
When mixed fluid enters rotating bowl of centrifuge through feed tube ,solids with larger density would rapidly deposit on inner wall of the bowl,forced by centrifugal acceleration.Then spiral pusher pushed deposited solids to taper end of the bowl,and discharges them out of centrifuge from residual outlet.Meanwhile ,liquid phase with smaller density forms a liquid ring layer and discharges from bowl through overflow port,the bowl and spiral pusher run at a high speed simultaneously ,for there exists speed discrepancy,deposited solids on the wall of bowl could be conveyed to residue outlet by spiral pusher.This separation process carry out continuously.

Separation technique
Feeding-gravitational separation-liquid discharge-sediment discharge.
Separation effect factors Centrifuging factor ,length to diameter ratio of cavity ,depth of fluid pool.
Field control
Bowl rotating speed ,rotative speed difference,between,spiral pusher and bowl depth of liquid pool.

Product Details:
Product Type Other
Technology Other
Power Source Pneumatic
Operating Type Semi Automatic
Surface Treatment Painted

Product Specifications:
Power Source Pneumatic
Operating Type Semi Automatic
Product Type Other
Technology Other
Surface Treatment Painted

Specification

Brand Adl Blastek

Automation Grade Semi Automatic

Phase Three

Voltage 415 V

Height 600 mm

Width 600 mm

Depth 600 mm

Product Details:
Product Type Other
Technology Other
Power Source Pneumatic
Operating Type Semi Automatic
Surface Treatment Painted
Color As per scope of customer

Product Specifications:
Color As per scope of customer
Product Type Other
Surface Treatment Painted
Technology Other
Power Source Pneumatic
Operating Type Semi Automatic

Product Description
Specification:

Brand Adl Blastek

Automation Grade Semi Automatic

Phase Three

Voltage 415 V

Height 600 mm

Width 600 mm

Depth 600 mm

Output of oil, water, and gas of oil wells are the most basic production parameters for oilfields to increase revenue and reduce expenditures, and realize intensive and digital production. However, due to different nature of the crude oil of each well, there are huge differences in fluid production, gas production, separated water , as well as the irregularities of oil well fluids and other complex factors, thus it is difficult to find a simple operation with strong adaptability, and measurement accuracy at home and abroad, which severely restrict improvement of the information construction and intensive management of the oil field. Our credible three-phase oil measurement technology is for this problem, especially for those oil wells that enter the high water period or high gas content.

Product Details:
Product Type L Other
Technology : Other
Power Source : Pneumatic
Operating Type: Semi Automatic
Power : 420 Volt (v)
Pressure : 6-7 Bar
Surface Treatment : Painted
Supply Ability : 7-10 Unit Per Month

Price Range 50000.00 - 110000.00 INR/Unit
Minimum Order Quantity : 1 Unit
Power : 420 Volt (v)
Operating Type : Semi Automatic
Warranty: All our machines are warranted for 12 months from the date of commissioning or 15 months from the date of dispatch whichever is earlier against all manufacturing defects. However this warranty not covers parts consumed at normal wear and tear during operation like rubber goods & parts in continuous contact of abrasive media and also any damages due to misuse or improper handling of the machine at customer premises. The warranty will lapse if customer uses spurious spare parts purchased from any other buyer on the machine and fail to operate and maintain the machine in accordance with the instructions.

Pressure 6-7 Bar
Color Dark Blue
Surface Treatment Painted
Weight (kg) Not Applicable Metric Ton
Power Source Pneumatic
Product Type Other
Usage/Applications Casting, Forging, Sheet metal etc
Technology Other

Applications of the portable blaster :

De-sanding and de-coring of castings.
Descaling of castings, forgings parts.
For creating rough surface inside and outside of heavy structure, pressure vessels, pipes for proper bounding of the primer/paint.
Can also be used in Wooden industry for decorative design purpose.
For creating textured/rough surface on different type of paving blocks, marbles, granite for their proper bounding on surface.
For removal of heat treatment scale, welding flux , corrosion, rusting in steel components.
For engraving / creating design, etching on different type of stones and metals.
For removal of old paint from metal surface of ships and other structural steel components.

Specification:

Power 5 Hp

Capacity 200 Kg

Material Stainless Steel

Automation Grade Semi Automatic

Application Rust Removal, Surface Finishing

Motor Phase Three Phase

Voltage 220-240 V | 50 Hz

No. of Wheels 3

Precise Aluminum Plate Tig Welding Machine , Industrial Mig Welding Robotic Machine

SPECIFICATION
Model
HS-RAW08
DOF
6
Driving Mode
AC servo Driving
Effective Load (kg)
6
Repeat Positioning Accuracy (mm)
0.05
Motion Range
J1
170
J2
120~-85
J3
85~-165
J4
180
J5
135
J6
360
Max Speed (°/S)
J1
150
J2
150
J3
180
J4
270
J5
270
J6
270
Allowable Max Torque
J4
7.2
J5
7.2
J6
5.2
Moving Radius (mm)
893
Machine Weight
75


DESCRIPTION
World Class Speed Robot
Robot motion makes minimum cycle times unbeatable. Light weight and high rigidity design results in high acceleration and minimum vibration. Maximum speed on all axes reduces move time. All this provides dramatically improved productivity.
HS-RAW Series robot enhance the accuracy and efficiency
Improved drives and motors for accurate positioning and better repeatability.
Slim and compact design allows closer installation in less floor space.
Maintainability is improved with easier inspections and parts replacement.
Superior Spot Welding Capability
Industry leading advanced servo gun software features and technologies.

APPLICATION
Applied to welding,loading and unloading, stacking transportation, gelatinization and spraying industry.


COMPETITIVE ADVANTAGE
1. HWASHI is the leading brand in resistance welding industry in China for 20 years;with good afterservices Factory direct sale, competitive price.
2. Customized Service: We can help to design and develop the welding machine according to your requirement. We are flexible and capable Supplier.
3. Genuine Product with Excellent Quality: 12 months warranty. Our machines are strictly complied with ISO9001:2000 and China Compulsory Certification. Most of our machines enjoy 8-10 years service life. 100% guarantee test before delivery.
4. After Sales Service and Technical Assistance: 24 hours technical support by email. Our professional team is always here willing to be your technical consultant.
5. Quick Delivery: Our company provides just-in-time delivery.
6. Prompt Response to Customers: Your satisfaction is the goal we pursue.
Tag: robotic spot welding machine, Automatic welding robot

;¨¤10 % 50hz

1) silicon controlled (nanche scr)
2) abb rectifier diode
3) japan siemens servo motor
4) integrated circuit (motorola of u.S.) and plc ( japan siemens)
5) japan siemens intelligent touch screen control
6) sanwo pneumatic parts from south korea
7) all digital control system
8) strictly comply with security standard of ccc and ce.

Dimensions:2500*2300*2600 mm
Weight:2500 kg

1.Full digital microcomputer control system,three grades discharge design(Pre-pressing,welding and tempering),equipping functions of Constant Voltage,Constant Current,Constant Heating,Slowly Increasing,Slowly Decreasing,save multi-group Schedule Number,etc.easily meet customers high requirements of welding quality;
2.Integrated high-strength frame Structure,more impact resistant and anti-shock ability under high pressure operation,to achieve more accuracy of welding position,both spot welding and projection welding,reach the largest welding performance;
3.All copper water-cooling transformer,Multi-channel forced water cooling system to ensure the reliability of the machine running for long time;
4.Manufactured in accordance with international ISO Standard and European CE Certificate.