Deep Drawn Pan Conveyor

SS Shrimp Pan Defrosting Conveyor

After freezing the shrimps inside the pan, the ice cake along with prawns has to be separated for packing & storing purpose. This is a tedious & time consuming job to be done manually. Shrimp Pan Defrosting Conveyor eliminates this issue and renders it as an easy process. This system consists of a conveyor system along with normal water spraying jet arrangement inside a small chamber. Freeze pans are set to travel on a confined path in conveyor. This confined path consists of shower line which sprinkles normal water on top of the pan. This process allows labors to separate ice cake from pan easily. The pans are stacked in a separate place and can be used in future.

Some of the features of SS Shrimp Pan Defrosting Conveyor are :
Efficiently saves time.
Prawns with ice cakes are separated without damaging pans.
Dripping water is collected in tank mounted at bottom reducing possibility of wet slippery floor.
Reduces fatigue of labor and improves productivity.
Continuous output at constant pace which results in uniform output.

SS Shrimp Pan Setting Conveyor

This conveyor is used for stacking the right amount of headless materials according to weight. Before stacking process the headless materials must be inspected in order to deliver the customer with quality material and to avoid rejection of goods. For this purpose, setting conveyor is used. It consists of an Inspection table with perforated sheet at top. The soaked materials are kept on the inspection table. After passing quality check, it is passed to Weighing table. Labors take a quantity of goods and put it in basket for weighing purpose. Once the right weight is displayed, the basket is kept on the setting conveyor. While travelling in the conveyor, labors take this basket and stack the goods inside the freezing pans one by one. Then they keep stacked pan on top conveyor and send the basket to starting point through return side of the belt. The stacked pans are delivered at other side of the conveyor. Labors collect the pans and stack them in plate freezer for further freezer room storage purpose. This conveyor consists of spray line mounted at the top side of the conveyor. This spray line can be used for cleaning purpose.

Some of the features of SS Shrimp Pan Setting Conveyor are :
By this conveyor, trolley usage can be considerably reduced.
As the freezing pans are travelled on the conveyor, Labour movement is eliminated.
Increased production output.
Fast and accurate way of setting goods inside pans.
Speed can be synchronized according to labor’s pace.
Conveyors are designed by taking labor ergonomics into account.

Product Description -
Cement Plant

Price of product (USD) -
RS 100000.00

Large conveyance: Conveyance of bulk materials in a closed case; cement, chemical, and food industries
Flow Conveyor Chain moves bulk materials in a closed case. It conveys the particles horizontally, on a slight incline, or vertically in an arrangement shaped like the letter L. This conveyor is sometimes called a Redler Conveyor.

Generally, a flow conveyor is used widely in the conveyance of bulk materials such as cement and fertilizer in chemical industries, and grain in food industries. Because it is enclosed, dust from the conveyed materials is contained, and will not pollute the surrounding area. A flow conveyor is not usually used to move sticky, dusty, or low-density products.

A flow conveyor set up to move cement has an average capacity of 300 ton/h and a speed of 35 m/min. Usually one strand of chain is used.

Specially shaped attachments with large clearances are installed on small pitch or large pitch conveyor chains. The chain operates in a casing filled with conveyed material, such as grain, flour, or ash.

This is based on a phenomenon used in a basic science experiment; when you put sand in a long cylinder, closed at one end with paper, and push the sand with all your strength, the paper cannot be broken if the cylinder is long enough. This is because the friction between the sand and the cylinder absorbs all of the pushing force. Conversely, in the flow conveyor, the attachments work as moving walls, and the sand moves along with it. To lift conveyed objects, the friction at the bottom wall of the conveyor must support the weight of the vertical portion, therefore, the conveyor must have a bottom line "L" shape.

Because there is very little relative movement among the conveyed materials in this application, breakage is rare. The case width is determined by the attachment dimensions; usually it is less than 750 mm.

Chains for flow conveyors include: RF03075 (average tensile strength, 29 kN) through RF26200 (314 kN) for grain conveyance; RF450W (108 kN) through RF36300N (868 kN) for other applications.

1) diameter: 50mm-220mm.
2) length: 190-3400mm.
3) tube: q235(gb) equal to s235jr(din)
4) shaft: 45# steel(gb)


Standard export package/wooden packing case/bundling packing/nude packing/iron frame etc/according to your quantity or as required

1. Conveyor roller description

Conveyor rollers are to be used for belt conveyor system which conyeys bulk materials such as ores, cement, sand, earth, crushed stones, grain and cereals , paper manufacturing materials and so on. We manufacture high quality conveyor rollers under standards of dt ii of china and jis of japan by fully automated manufacturing facilities exclusively designed by our own technology.

2. Conveyor rollers types

Our company is able to produce a variety of carrying rollers, with a wide serviceable range and excellent quality. Including troughing rollers, parallel supporting rollers, self aligning rollers, and snub rollers. And based on the different material, the supporting rollers are divided into the rubber roller, porcelain roller, nylon roller and insulating roller.

3. Conveyor rollers feature

The shaft is made of the cold drawn round steel, the bearing seat is made of the stamped steel plate of high quality, the seal structure is pdc, with three sealing devices, and the performances in terms of dust prevention and water resistance are superior to those specified in national standard. After assembling, the rollers are characterized by the high strength, small radical play eccentricity, small resistance to rotation, light weight, low energy consumption, long service life of more than 30000 hours.

4. Conveyor roller diameter:¦µ60~¦µ194

Conveyor roller length:124l~2500l

Diameter:89, 108, 133, 159, 193mm

Friction -aligning the upper and lower idler group used to adjust the belt running side to prevent the snaking to ensure stable operation of the conveyor belt .
The various idlers advanced structure , reliable performance , roll paper timber through a rigorous selection process , the use of high-quality special welded pipe , a strict tolerance requirements . Shaft material using cold drawn round steel, bearing is made of high qualified steel plate stamping , PDC type seal structure , three sealing devices , dustproof, waterproof properties is good. The assembly to roll strength, radial runout quantity is small, the rotary resistance is small, light weight, low energy consumption, long service life.