Membrane Separation N2 Generator

PSA N2 generation system

1. Operational Principle
PSA nitrogen generation adopts carbon molecular sieve as adsorbent whose capacity of adsorbing the oxygen in air shall be larger more than of adsorbing the nitrogen in air. By means of valve opened and closed with PLC, two columns a&b can be shifted in circulation for pressured adsorption,de-pressured dis-adsorption in turn so as to separate the oxygen and nitrogen in air, thus a nitrogen gas with purity demanded can be made.

2. Typical application
Nitrogen is used in short-circuit, large-scale integrated circuit, color and black & white picture tubes, parts of TV sets and recorders, semiconductors manufacturing, electrical equipments as well as laser drilling and other electrical components as protective atmosphere.

1. Operational Principle
PSA nitrogen generation adopts carbon molecular sieve as adsorbent whose capacity of adsorbing the oxygen in air shall be larger more than of adsorbing the nitrogen in air. By means of valve opened and closed with PLC, two columns a&b can be shifted in circulation for pressured adsorption,de-pressured dis-adsorption in turn so as to separate the oxygen and nitrogen in air, thus a nitrogen gas with purity demanded can be made.

2. Typical application
Nitrogen is used in short-circuit, large-scale integrated circuit, color and black & white picture tubes, parts of TV sets and recorders, semiconductors manufacturing, electrical equipments as well as laser drilling and other electrical components as protective atmosphere.

3. Specification
Flow: 3~5000Nm3/h
Purity:95%~99.9995%
Pressure: 0.1~0.8Mpa
Dew point:-45
.Certification:ISO90001,CE
.Voltage: 220V/50HZ
.Warranty:1 Year

4. Main features
Provide the user with the maximum economic valueThe filling and compacting the molecular sieve shall be made in special method so that the larger compaction intensity and higher adsorption efficiency can be got.

Nitrogen generator for car, light truck and bus tyres

Index:
1, pressure input: 7kg/cm2~10kg/cm2
2, n2 pressure output: 6kg/cm2~16kg/cm2
3, n2 purity: 97~99.9%
4, n2 capacity: 3-10 cbm/hr
5, n2 display model: automotive n2 dynamic simulative system
6, cms: 220cms
7, standard accessories: pressure increasing system installed, 2*n2 tanks installed, vacuum system, tire inflation gun, high pressure tubes
8, machine size: 550*650*1300 (mm)
9, weight: 150kg
10, power system: ac220v 50hz or ac110v 50hz

Nitrogen generator produce high purity n2 for inflating tyres, with inflating with n2, you can get:

1, longer term stability of the tyre pressure
2, better grip and handling
3, reduced fuel consumption about 2-10%
4, longer tyre life about 25%
5, enhanced safety
6, more economy

Non-wood case, 150kg.

Product Description
gel accumulator 2v 800ah (OPzV800-2)
OPZV800-2

Opzv Series Valve Regulated Lead Acid batteries are designed with a proven combination of GEL and Tubular technologies to offer a very high level of reliability. Opzv batteries benefit from an optimized plate design which gives capacities in excess of the DIN standard values. In addition, this series offers both a longest float life and a high cycle life in widely industrial field.


Safety and Sealed
No electrolyte leakage will occur from terminals or case or case of any Storace Battery ensuring safe and efficient operation.

Maintenance-Free operation
There is no need to add water thanks to unique gas recombination system which totally transforms the generated gas into water.

Storace batteries do not need the equalizing charge
As a result of monomer battery's interface resistance capacity and float voltage uniformity are fine.

No Free Acid
The special electrolyte retentive separators bold the acid and thus there is no free acid inside the battery, and therefore the battery can be mounted in any position.

Long life Design
The use of heavy -duty lead-calcium alloy grids with anti-corrosive construction enables the Storace AGM battery to remain in float service for 10-15 years; the GEL battery to remain in float service for 15-20 years. The cycle life can be more than 1000 cycles

High Reliability and stable quality
With advancing AGM and GEL production technology and strictly quality control system, the battery quality is stable and the battery performance is reliable. The voltage, capacity and seal are 100% tested on line.

Self-discharge
The self-discharge rate in room temperature is approximately 2% of nominal Capacity per month.

Operating temperature
TheStorace Battery can be operated between -40�°C to +65�°C.The battery can give out over40% fo nominal capacity at -40�°C.

Generator

The equipment takes agricultural and forest waste, such as rice husk, wood chips, coconut fiber dust, saw dust and crop stalks etc as the raw biomass fuel. These biomass fuels will be gasified into rough gas in the Gasifying Furnace, which is our patented product. Then after a series of cleaning and cooling treatment, the purification of the gas will be pure enough to meet the requirement of gas needed by the internal combustion engine to generate electric power.
Available biomass fuels:
Agriculture and forest residues, such as rice husk, crop stalks coconut fiber dust, palm shell, pruned fruit tree branch, wood chips, chips from timber processing factory and so on.
Biomass gas from Fengyus fluidized bed can not only be sent to internal combustion engine for electric power generation but can also be used for household fuel to cooking and heating. It also can be send to boiler or hot-blast furnace to produce steam or hot air for drying
Index:
Model:LHC-100 LHC-300
Generator rated output power:100-300KW
Production volume of biomass gas 2250Nm/3hr
Gas temperature of the outlet after cleaning and cooling:under 45 degree celsius
Consumption of biomass fuel:0.9-1.8ton/hr(for rice husk)
Weight:2.0-3.8ton
Main component and caloricity of biomass gas are different for difference of characteristic of biomass fuel gasification method, the caoricity of biomass of gasification is normally 1100-1500kcal/Nm3.(4.6-6.3MJ/Nm3)
Biomass gas component:
CO:17.2%
H2:4.05%
CH4:6.82%
CmHn:1.24%
H2S:----
CO2:15.1%
O2:0.8%
N2:54.7%.

Psa nitrogen generation advantages

The gas seperation of psa takes such advantages as different gas has different adsorbing capacity in the cms under different pressure to separate gases. Psa nitrogen generators are designed based on the psa theory. They possess the properties of simple technology, low space requirement, quick start up, simple maintenance&operation, good applicability, high automation, low operation cost, low investment, etc.
Main technical indicators:


Non-standard packaging

Description:
Portable Medical Oxygen Molecular Sieve is high-efficiency oxygen molecular sieve of X-type molecular sieve(pore diameter:10 angstroms). It is suitable for household and medical oxygen generator with PSA. It has good selectivity of N2/O2. Easily desorption.

Technical Parameter:
Properties Unit Bead
Diameter mm 0.4-0.8 1.6-2.8
Bulk density g/ml 0.62 0.62
Crushing strength N/pce / 30.0
N2 Capacity
(1 bar,25) ml/g 8.0 8.0
N2/O2 Selectivity
(1 bar,25) - 3.0 3.0
Particle Ration wt% 95.0 97.0
Attrition wt% 0.30 0.30
Static H2O capacity
(RH=60%,25) wt% 30.0 30.0
Static CO2 capacity
(250mmHg,25) wt% 19.8 19.8
Loss on Ignition
(575,1hr) wt% 1.0 1.0

Application:
PSA industrial oxygen production and medical center oxygen supply system