Floratax Wall Putty

Wall Putty

Magna Green is an Excellent Quality, Unique Developed Coating, and Cost Effective. Wall Putty Suppliers Leading Company Magna. Wall Putty Utilized for Both Interior as Well as Exterior Finishing of Walls. T-putty

white wall putty

A product of Fusion, Fusion Wall Putty is a white cement-based putty. It bonds strongly with base surface and can be used both on dry and damp walls. Painters can apply Fusion Wall Putty to create a smooth and undulation-free surface on both interior and exterior walls to get that royal look. Use of Fusion Wall Putty can help in increasing the life of the wall by making it flake, abrasion, and water resistant. Properties Base: White cement, Quality polymers & specialty chemicals and fillers. Pot Life : 2hrs. Water Demand : 40 45% Coverage : 25 + 3 sft/mm/kg Thickness of layer : 2.0 mm (two coats).

A blend of white cement, polymers and minerals, JP Wall Putty protects and smoothen walls and is effective on all type of cementitious surface. It is pure white in color and has strong adhesive properties which ensure a strong between the base and the paint making it an ideal surface for all interior and exterior walls.

Wall Putty is completely cement based putty which is white in color. Its use is better for the exterior as well as interior walls of buildings. The white colored cement-based putty binds very strongly with base plaster in such conditions as well when the surface is damp and it forms a good and protective base. The pores (fine one) on ceiling and walls can be easily fills up and gives you a fine even and very smooth and dry surface which is best for painting. Wall putty gives an effective protection against flaking; so it assures you good even, looking smooth walls of your home for so many years. Features / Advantages: It is white cement based and skim coated. For application of paint it gives smooth and water resistant surface. It has as excellent adhesion. It causes no peel off because of seepage. It gives excellent finish, increases the durability of paint, and causes less consumption of paint. No need of primer. No kind of curing is required. Areas of application: Application can easily applied on plastered surface. It gives fine finish and it is very useful for Inner and Outer walls. Surface Preparation and Application Before applying wall putty makes sure that the surface is free from dust or not, if not make it dust free. Also make sure that it is free from any type of fungus, greases, bitumen, and any kind of release agents, moss, paints, oils, loose particles or any kind of coating. Make sure that the surface should be free from all the above mentioned impurities otherwise it affects the workability of wall putty. Before applying make sure that the surface where the putty is supposed to be applied should be pre-wetted. This will helps you to provide a very strong bond with the substrate. Its better to apply at least two coats of Addage Wall Putty on plastered surface of wall (Each coat should be Max 1.5 mm of total thickness). Coverage The Addage Wall Putty covers almost more surface area that is exceeding to 9-10 Sq. ft. /kg. In two coats on new plastered wall.

1.Wallputty/ skimcoat ( white) 2.Rangeela putty (available in pink, light green, yellow and off white) 3.Crack fillers 4.Gyp + gypsum plaster ( hand and machine application ) 5.Ready mix plasters ( rmp ) 6.Block jointing mortars ( bjm grey cement based ) 7.Tile adhesive ( grey and white cement based ) 8.Master plaster 9.Plasto seal 10.Plasto proof 11.Lime plast 12.Quick bond

Premium grade Smoothly apply Extra covering area Exterior and intior coating 20 kg , 40 kg