Please click here to check who's online and chat with them.

Cr-6061-2 Lubricant Level Sensor

Supplier From China
Nov-07-19

CR-6061-2 Capacitive Fuel Level Transmitter (Sensor) This sensor is a special product for lubricating fuel. It can be used for long-term operation in high temperature and high viscosity. It is tailored for accurate measurement of generator fuel level mechanical equipment.

The whole machine does not have any movable or elastic parts, and is resistant to impact, easy to install, high in reliability, high in precision, and good in performance and price. It can be installed in various occasions to accurately measure and control the fuel level of gasoline, diesel fuel and hydraulic fuel. It is also suitable for the measurement of various non-conductive liquids. Such products can also be used to measure conductive media in the case of particularly harsh on-site conditions, particularly severe electromagnetic interference, and particularly high agitation.

The core components of the product are converted into standard electrical signals (typically 4-20 mA) using an advanced RF capacitance detection circuit through a 16-bit microcontroller with precise temperature compensation and linear correction. Optional HART, CANBUS, 485 communication protocol for system configuration. The full range of transmitters are self-calibrating, allowing users to automatically calibrate zero and range with buttons or leads to suit different requirements in complex locations.

Working principle
The sensing part of the CR-6061-2 capacitive fuel level transmitter (sensor) is a coaxial container that causes a change in the capacitance between the sensor housing and the sensing electrode when the fuel enters the container. This variation is passed through the circuit. The conversion and accurate linear and temperature compensation, output 4-20mA standard signal to the display instrument.

Performance
Detection range: 0.05-5m
Accuracy: 0.5
Pressure range: -0.1MPa-0.6MPa
Probe temperature resistance: -50-100
Output signal: 4-20mA, 4-20mA superimposed HART communication,

485 communication, CAN bus communication
Power supply voltage: 12-28VDC (intrinsic safety type needs to be powered by safety barrier)
Fixing method: Thread mounting M20Ã?1.5, M27Ã?2, M18Ã?1.5, M16Ã?1
Flange mounting DN25, DN40, DN50.

Special specifications can be customized according to requirements
Probe diameter: Φ19,
Explosion-proof grade: intrinsically safe ExiaIIC T6 flameproof ExdIIC T5
Protection level: IP65
Intrinsic safety parameters: Ui: 28VDC, Ii: 93mA, Pi: 0.65W, Ci: 0.042uf, Li: 0mH

Price and Minimum Quantity

Price: Negotiable
MOQ: Not Specified

Recent User Reviews

This user has not received any reviews yet!

Verification Status


 
 
Contact Supplier
Renew

More Items Similiar to: Cr-6061-2 Lubricant Level Sensor

Oct-24-19
 
CR-6061-2 Capacitive Fuel Level Transmitter (Sensor) This sensor is a special product for lubricating fuel. It can be used for long-term operation in high temperature and high viscosity. It is tailored for accurate measurement of generator fuel level mechanical equipment.

The whole machine does not have any movable or elastic parts, and is resistant to impact, easy to install, high in reliability, high in precision, and good in performance and price. It can be installed in various occasions to accurately measure and control the fuel level of gasoline, diesel fuel and hydraulic fuel. It is also suitable for the measurement of various non-conductive liquids. Such products can also be used to measure conductive media in the case of particularly harsh on-site conditions, particularly severe electromagnetic interference, and particularly high agitation.

The core components of the product are converted into standard electrical signals (typically 4-20 mA) using an advanced RF capacitance detection circuit through a 16-bit microcontroller with precise temperature compensation and linear correction. Optional HART, CANBUS, 485 communication protocol for system configuration. The full range of transmitters are self-calibrating, allowing users to automatically calibrate zero and range with buttons or leads to suit different requirements in complex locations.

Working principle
The sensing part of the CR-6061-2 capacitive fuel level transmitter (sensor) is a coaxial container that causes a change in the capacitance between the sensor housing and the sensing electrode when the fuel enters the container. This variation is passed through the circuit. The conversion and accurate linear and temperature compensation, output 4-20mA standard signal to the display instrument.

Performance
Detection range: 0.05-5m
Accuracy: 0.5
Pressure range: -0.1MPa-0.6MPa
Probe temperature resistance: -50-100
Output signal: 4-20mA, 4-20mA superimposed HART communication,

485 communication, CAN bus communication
Power supply voltage: 12-28VDC (intrinsic safety type needs to be powered by safety barrier)
Fixing method: Thread mounting M201.5, M272, M181.5, M161
Flange mounting DN25, DN40, DN50.

Special specifications can be customized according to requirements
Probe diameter: 19,
Explosion-proof grade: intrinsically safe ExiaIIC T6 flameproof ExdIIC T5
Protection level: IP65
Intrinsic safety parameters: Ui: 28VDC, Ii: 93mA, Pi: 0.65W, Ci: 0.042uf, Li: 0mH
Dec-20-19
 
CR-6061-3 universal automotive fuel level sensor uses tomography technology to dynamically analyze various parameters of the sensor in the medium, automatically refresh the reference value and accurately compensate. The same sensor can be changed at any time to change the measurement medium or change the installation environment. It can be automatically adapted and accurately measured without recalibration, and is not affected by dielectric constant and temperature changes. For example, after a CR-6061-3 automotive fuel level sensor is installed in a automotive , the automotive travels from the south of the country to the north, no matter how the fuel label is changed, or what additive is added, it can be accurately measured without recalibration. Its true oil level. And temperature, radio frequency interference and other factors have no effect on the sensor.
Performance
Detection range: 0.05-1m
Accuracy: 0.1 level
Pressure range: as required
Probe diameter: 16
Supply voltage: 12-28VDC
Medium temperature: -50-125
Output signal: 4-20mA, 0-5V, 0-10V, 485 communication, 232 communication, CAN bus communication
Fixing method: Thread M20*1.5 or flange mounting, special specifications can be customized according to requirements
Explosion-proof grade: intrinsically safe ExiaIIC T6 flameproof ExdIIC T5
Dec-03-19
 
CR-6061-3 universal automotive fuel level sensor uses tomography technology to dynamically analyze various parameters of the sensor in the medium, automatically refresh the reference value and accurately compensate. The same sensor can be changed at any time to change the measurement medium or change the installation environment. It can be automatically adapted and accurately measured without recalibration, and is not affected by dielectric constant and temperature changes. For example, after a CR-6061-3 automotive fuel level sensor is installed in a automotive , the automotive travels from the south of the country to the north, no matter how the fuel label is changed, or what additive is added, it can be accurately measured without recalibration. Its true oil level. And temperature, radio frequency interference and other factors have no effect on the sensor.
CR-6061-3 type automobile oil level sensor can simultaneously output temperature signal from communication bus with accuracy of 0.1

Performance

Detection range: 0.05-1m

Accuracy: 0.1 level
Pressure range: as required

Probe diameter: Φ16
Supply voltage: 12-28VDC

Medium temperature: -50-125
Output signal: 4-20mA, 0-5V, 0-10V, 485 communication, 232 communication, CAN bus communication
Fixing method: Thread M20*1.5 or flange mounting, special specifications can be customized according to requirements
Explosion-proof grade: intrinsically safe ExiaIIC T6 flameproof ExdIIC T5
Nov-07-19
 
CR-6061-3 universal automotive fuel level sensor uses tomography technology to dynamically analyze various parameters of the sensor in the medium, automatically refresh the reference value and accurately compensate. The same sensor can be changed at any time to change the measurement medium or change the installation environment. It can be automatically adapted and accurately measured without recalibration, and is not affected by dielectric constant and temperature changes. For example, after a CR-6061-3 automotive fuel level sensor is installed in a automotive , the automotive travels from the south of the country to the north, no matter how the fuel label is changed, or what additive is added, it can be accurately measured without recalibration. Its true oil level. And temperature, radio frequency interference and other factors have no effect on the sensor.
CR-6061-3 type automobile oil level sensor can simultaneously output temperature signal from communication bus with accuracy of 0.1

Performance

Detection range: 0.05-1m

Accuracy: 0.1 level
Pressure range: as required

Probe diameter: Φ16
Supply voltage: 12-28VDC

Medium temperature: -50-125
Output signal: 4-20mA, 0-5V, 0-10V, 485 communication, 232 communication, CAN bus communication
Fixing method: Thread M20*1.5 or flange mounting, special specifications can be customized according to requirements
Explosion-proof grade: intrinsically safe ExiaIIC T6 flameproof ExdIIC T5
Oct-24-19
 
CR-6061-3 universal automotive fuel level sensor uses tomography technology to dynamically analyze various parameters of the sensor in the medium, automatically refresh the reference value and accurately compensate. The same sensor can be changed at any time to change the measurement medium or change the installation environment. It can be automatically adapted and accurately measured without recalibration, and is not affected by dielectric constant and temperature changes. For example, after a CR-6061-3 automotive fuel level sensor is installed in a automotive , the automotive travels from the south of the country to the north, no matter how the fuel label is changed, or what additive is added, it can be accurately measured without recalibration. Its true oil level. And temperature, radio frequency interference and other factors have no effect on the sensor.
CR-6061-3 type automobile oil level sensor can simultaneously output temperature signal from communication bus with accuracy of 0.1

Performance

Detection range: 0.05-1m

Accuracy: 0.1 level
Pressure range: as required

Probe diameter: Φ16
Supply voltage: 12-28VDC

Medium temperature: -50-125
Output signal: 4-20mA, 0-5V, 0-10V, 485 communication, 232 communication, CAN bus communication
Fixing method: Thread M20*1.5 or flange mounting, special specifications can be customized according to requirements
Explosion-proof grade: intrinsically safe ExiaIIC T6 flameproof ExdIIC T5
GOLD Member
VERIFIED
Oct-19-20
Supplier From Seoul, South Korea (Republic Of Korea)
GOLD Member
Jan-20-23
Supplier From Dhaka, Dhaka, Bangladesh
 
Honeywell BW Solo is a easy to service single-gas detector with BLE connectivity that provides real-time visibility into the status and safety of hazardous-area workers, helping companies respond faster, more knowingly and decisively to safety incidents. The first single-gas detector with the 1 Series sensor for CO, H2S and O2

Features & Benefits:
User-friendly operation,
Easy-to-read display for multiple languages,
Lightweight convenience,
Ease of maintenance,
Serviceability,
The new 1-Series sensor for enhanced reliability,
Connected Bluetooth Low Energy (BLE) capabilities.
May-25-15
Buyer From Varanasi, Uttar Pradesh, India
Supplier Of Heavy Melting Scrap (HMS)   |   Lubricants   |   Wheat Flour   |   Aluminium Balls   |   Copper Ore   |   Beverages   |   Toys & Games   |   Fertilizers   |   Diesel   |   Wires & Cables   |   Resin   |   Handicrafts, Gifts & Decorative   |   Sportswear/Polo Shirts   |   Grains & Cereals   |   Frozen Chicken   |   Brass Handicrafts   |   Shirts & T-Shirts   |   Home Furnishing Textiles   |   Coke   |   Aluminum Ingots   |   Blankets   |   Aluminium Alloy   |   Crude Oil   |   Aggregates   |   NPK   |   Metal Scraps   |   Copper Scrap   |   Animal By Products

Service Provider Of Importing/Exporting   |   Animal & Cattle Feed   |   Dry Fruits & Nuts   |   Knitted & Woven Garments   |   Towels   |   Aluminium Billets   |   LPG/LNG & CNG   |   Urea   |   Copper Millberry Scrap   |   Copper Wire Scrap   |   Wooden Handicrafts   |   Other Handicrafts & Decorative   |   Charcoal   |   Printing Paper   |   Rice   |   Fresh Fruits   |   Marble Handicrafts   |   Aluminum Scrap   |   Food Products   |   Wood Charcoal   |   Fresh Chicken   |   Pesticides   |   Clothing & Accessories   |   Polo Shirts And T Shirts   |   Shirts   |   Bed Linens, Bed Sheets   |   Sandstones & Sands   |   Electrical Household & Other Goods, Components   |   Petroleum By Products   |   Food Processing Machinery   |   DAP (Diammonium Phosphate)   |   Aluminium Scrap   |   Fresh Vegetables   |   Processed Food   |   Livestock
GOLD Member
Nov-16-23
Supplier From Istanbul, Istanbul, Turkey

Verification Status