Asphalt Mix

Description
Gravel is used in Water Filtration with water treatment Filtration products Silica Sand, Anthracite, Activated Carbon, Birm, Pumice and Garnet in portable water treatment, surface water treatment, swimming pool water treatment, R.O. reverse Osmosis treatment plant and wastewater treatment also in conventional water treatment filters. Filter Gravel is an extremely effective filter media because of its ability to hold back precipitates containing impurities. Filter sand size, angularity and hardness are the important filter sand characteristics to ensure proper filtering. In slow sand filters, the gravel is normally on the bottom layer and is used as channels for filtered water to make it to the outlet lines. Sand will often plug the holes in the outlet pipe and the gravel helps prevent that. The primary role of the gravel in the bio-sand filter is to prevent clogging of the PVC pipe with sand. The first layer is sufficiently deep to cover the inlet to the pipe and should be large enough to keep the openings in the filter bottom free for the flow of water out of the filter, and the upper layer fine enough that the overlying filter sand will not sink into its pores.

Sand and gravel are used for road construction, for mixing with asphalt, as construction fill, and in the production of construction materials like concrete blocks, bricks, and pipes. It is also used to make roofing shingles, used on icy roads in the winter, for railroad ballast, and water filtration. The quarry is often where our gravel and other aggregates are excavated and where rocks such as sandstone and basalt are crushed down to size.

3/4 Stone chips aggregates, often referred to as 3/4-inch aggregates, are a type of construction aggregate characterized by their approximate size of three-fourths of an inch (20 mm aggregates) in diameter. These aggregates are commonly used in construction and various civil engineering applications. Here are some key details about 3/4 Stone chips aggregates:
1. Size: As the name suggests, 3/4 Stone chips aggregates have a particle size of roughly 3/4 of an inch in diameter. They are sometimes also referred to as 20 mm aggregates in metric units.
2. Composition: 3/4 Stone chips aggregates are typically made from crushed stone or naturally occurring stone materials, such as granite, limestone, trap rock, or gravel. The specific type of stone used can vary based on regional availability and project requirements.
3. Uses: These aggregates have a wide range of applications, including:
Construction:3/4 Stone chips aggregates aggregates are commonly used as a key component in concrete mixes, asphalt mixes, and road construction. They provide stability and strength to these materials.
Drainage: Their size and angular shape make them suitable for use in drainage systems, French drains, and other applications where effective drainage is needed.
Landscaping: 3/4 Stone chips aggregates can be used in landscaping projects for pathways, decorative features, and as a base for retaining walls or pavers.
Subbase: They are also used as a subbase material for foundations and roads, providing a stable foundation for construction.
4. Durability: 3/4 Stone chips aggregates are known for their durability and ability to withstand heavy loads and wear over time. They contribute to the overall strength and longevity of construction projects.
5. Installation: Proper installation techniques, such as spreading and compacting the aggregates to achieve the desired thickness and density, are essential to ensure their effectiveness in construction and drainage applications.
6. Cost: The cost of 3/4 Stone chips aggregates can vary depending on factors like location, the specific type of stone used, and local market conditions and the availability of aggregates supplier. They are generally cost-effective compared to other construction materials.
In summary, 3/4 stone chips aggregates are a versatile and widely used construction material valued for their size consistency, durability, and suitability for various applications, 3/4 stone chips aggregates supplier are playing key factor to boot this business in Bangladesh.

Product Description
We specialize in manufacturing different size of crushed limestone required for the fabrication of ready mix concrete, cement block, filter media and asphalt for road and runways.

Product origin :
Kachchh, Gujarat (India)

Key Specifications/Special Features :
"Chemical composition: As per requirement
Certification SGS and As other buyer's requirement
Place of Origin - Kachchh Gujarat,
Port Of Loading Mundra Port
Payment Term DP,LC
Delivery Time Shipment within 15-30 working days"

Minimum Order Size and Packaging details :
Packing 500kg, 1000 kg jumbo bag and loose bulk

Our company produces construction grade sand used in Ready Mix Concrete, Concrete Block, Concrete Pavers, Manufactured Stone and all types of masonry products.
We have medium/fine texture sand that is ideal for construction and meets The ABNT specifications for making concrete, asphalt, and mortar; and we are in the process to be SGS certified.
Also, our company is fully Environmental Protection Ministry licensed.  The sand is laboratory tested and test results are available for your review.