1.Brief Introduction
Torque anchor is used to take the reactive torque given by the friction created between the rotor and stator of the pump with progressive cavities, to prevent the tubing from unscrewing. It is mounted under or just above the pump. It uses the principle of a mandrel with two slips (one floating,
one stationary) camming in opposite directions anchoring the tubing string to the inner casing wall.
Alternative connections and specially engineered sizes are available upon request
We are a professional manufacturer of oil down hole tools , high quality and reasonable price .
Any problem about our products , welcome here .
Our tubing anchor anchor the tubing string in a rod pumping well .The tubing anchor effectively reduce rod, tubing, and casing wear. This cuts operating costs. Elimination of breathing and buckling of the tubing string also increases production by lengthening the effective stroke of the pump, which increases volumetric efficiency. Based on proven technology, the Anchor uses hydraulically activated hold-down slips to provide an anchoring point for the tieback or workstring during stimulation operations. These tubing anchors are the most economical and effective insurance you can buy against premature repairs and downtime. Our Services For more information, you can contact me : Looking forward to cooperating with you!
Supplier: Petroleum equipment, such as tubing anchor, torque anchor, packer, centralizer, sucker rod guide, downhole gas separator, couplings
Supplier: Sucker rod, drill pipe, oil packer, centralizer, coupling, polished rod clamp, drill collar, washover pipe, tubing anchor, torque anchor, gas sand separator,bridge plug,composite brige plug,dissolvable frac bridge plug.
Services: Manufacturer
Anchor bolt is a heavy-duty anchor made of galvanized steel suitable for fixing hangers, brackets, channels, or other metal profiles to concrete walls. It is used for high heights and loads. Its characteristics include a torque-controlled expansion, a high load capacity in solid material, and no harm coming from removing fixtures as they do not affect the anchor. Advantages: Partition System Lining System Ceiling System
Detailed Images The Hammer Union can be used for cementing trucks, all kinds of manifolds and other high pressure equipment, and pipes. It is an important part for transporting oil. Water, fracturing fluid and mixed fluid. These products are all made of high quality steel by forging and finishing cut. They have good. Mechanical performance and sealing property. Especially they can operate under the bad weather condition. They can be assembled fixed easily and conveniently. Main technical parameter model number collecting norm working pressure, structural length drift diameter. The product adopts some end connections of pipeline thread, tubing thread, butt-weld.
he polish rod clamps are with hinge-joint butterfly structure. The body is made of high grade casting steel and accomplished with subjected heat treatment. The clamps hold the polish rods tightly with force of friction. No any inserts with teeth needed. So damages and cuttings on the polish rod surface can be eliminated.
The polished rod clamp is of butterfly structure, it is fixed on the polished rod as retaining device for the wire hanger. It makes the pumping unit horse-head connected with polished rod through rod eye lifting device, and then the polished rod append and support the load of sucker rod string. The polished rod clamp is an important part connecting oil pump and sucker rod, it is required not only reliable, have a certain capacity, but also can not cause damage for sucker rod.
The polished rod clamp is of butterfly structure, it is fixed on the polished rod as retaining device for the wire hanger. It makes the pumping unit horse-head connected with polished rod through rod eye lifting device, and then the polished rod append and support the load of sucker rod string. The polished rod clamp is an important part connecting oil pump and sucker rod, it is required not only reliable, have a certain capacity, but also can not cause damage for sucker rod.
Material: Bracket-Ductile Iron, Grade 654512 Per ASTM A536;RCS Shaft-Per ASTM A29 or A576 Hot-dipped galvanized per ASTM A153, after fabrication Do not exceed 165 ft/lbs of Torque on 7/8" dia. Lifting thread rods during stabilizing or load lock-off. Recommoned anchor shaft cutoff level above the bottom of the footing is 10" to 11" maximum lift distance 5/8"X4-1/2" wedge bolt Notes: OEM service is available, different materials and specifications can be customized according to your demands.
