Traffic Lights

Plastic Solar Warning Traffic Light,Plastic LED Traffic Light

1. Saving energy evidently, totally averagely saving power more than 70%. 2. Environment friendly(without lead, mercury, and other highly toxic pollutants; without interference on the power grid, bad glare-free, non-life habitat light pollution) 3. Unique structure of the new design.(scientific rectangular design equipped with light distribution)。 4. Intelligent control systems, precise current. Four-side adjustment of lighting angles( the farthest distance between the poles horizontally up to +é-ª 25 m, one-way up to 16m). 5. Long life span. 6.80v-264v input voltage, applied worldwide and keeping the same lux.

Description: Led roadway signal light (crosswalk) Model number: Zszm-xhd-rx-200/300/400-xx Emitting area: Diameter 200mm or customized Voltage:ac85-265v 50/60hz Colour yellow / red / green red Light intensity¡ý6000mcd Wavelength 630¡à5nm Power consumption ¡ü12w Beam angle: 30degree Led average life time ¡ý100000h Standard packing

Solar road stud01 Power supply: solar power Power storage: battery or capacitor Operating time: shined for 8 hours with standard luminous intensity in one time can sustain power supply continuously for 72 hours Shining rate: 4hz f+20 percent Displaying colors: red, yellow and so on ¬ª10 led: 2 x 3 pcs super bright. View distance: over 1, 000 m Life in use: over 3 years used in a efficient way Temperature range: -20 fpc---- + 70 fpc Size: 110 ´ 88 ´ 23 mm Material of shell: aluminium alloy Weight: 550g (single-sided) and 520g (double-sided) Compression resistance: over 25 tons Key features: Two reinforced veins are designed on the top edges of it to not only strengthen compression resistance but also protect the solar panel against compression from traffic loads Solar panel, electronics and optics are fitted inside waterproof and unbreakable Two screw holes are designed on both sides so as to be fitted steadily with screws in road Adopting electronic element against high temperature and so to be suitable for high temperature area On the top edges of it are designed three grooves, which can be an access for rain water or sand or rock, so as to prevent the solar panel from abrasion Epoxy glue is filled in the shell. Easy, simple and steady to install like a standard road stud with two screws or glue in road Suitable for edge line of road

Solar road stud02 Power supply: solar power Power storage: battery or capacitor Operating time: shined for 8 hours with standard luminous intensity in one time can sustain power supply continuously for 72 hours Shining rate: 4hz f+20 percent Displaying colors: red, yellow and so on ¬ª5 led: 2 x 3 pcs super bright. View distance: over 1, 000 m Life in use: over 3 years used in a efficient way Temperature range: -20 fpc---- + 70 fpc Size: ¬ª116 ´ 21(h) mm Material of shell: pc plastic anti- uv material Weight: 270 g Compression resistance: 10 tons Key features: Round design creates good appearance while relieving the impaction from traffic load so as to be durable Combined size complying with the size of round post and saponaceous appearance, it can be installed at the top of round post at the cross, and make the cross clearer at night Two reinforced veins are designed inside to strengthen compression resistance Solar panel, electronics and optics are fitted inside waterproof and unbreakable According to requirement the number of led can be single light, double lights and three lights in one side, as well single light, double lights and three lights in both sides Two screw holes are designed on both sides so as to be fitted steadily with screws in road or round post Epoxy glue is filled in the shell. Easy, simple and steady to install like a standard road stud with two screws or glue, both in road and in round post Suitable for edge line of road 1 pc/ white box, 30 pcs/ carton Carton size: 475x 423x 317mm

Solar road stud03 Power supply: solar power Power storage: battery or capacitor Operating time: shined for 8 hours with standard luminous intensity in one time can sustain power supply continuously for 72 hours Shining rate: 4hz f+20 percent Displaying colors: red, yellow and so on ¬ª10 led: 2 x 2 pcs super bright. View distance: over 1, 000 m Life in use: over 3 years used in a efficient way Temperature range: -20 fpc---- + 70 fpc Size: 107 ´ 107 ´ 22.5 mm Material of shell: pc plastic anti- uv material Weight: 550g (single-sided) and 520g (double-sided) Compression resistance: over 8 tons Key features: Two reinforced veins are designed on the top edges of it to not only strengthen compression resistance but also protect the solar panel against compression from traffic loads Solar panel, electronics and optics are fitted inside waterproof and unbreakable Two screw holes are designed on both sides so as to be fitted steadily with screws in road Adopting electronic element against high temperature and so to be suitable for high temperature area On the top edges of it are designed three grooves, which can be an access for rain water or sand or rock, so as to prevent the solar panel from abrasion Epoxy glue is filled in the shell. Easy, simple and steady to install like a standard road stud with two screws or glue in road Suitable for edge line of road 1 pc/ white box, 30 pcs/ carton Carton size: 475x 423x 317mm

Solar road stud 1. Model no: as-r001 2. Material: aluminum alloy and polycarbonate 3. Power: solar cell, 0.25 w 4. Power storage: battery or capacitor(the latest technology in power storage, has life expectancy of 100, 000 circles) 5. Led ¼¼8: 2pcs / side, 2 sides 6. Color: available with amber, blue, green, red or white 7. Light mode: constant / flash 8. View distance: more than 800m 9. Automatically starts to work when night falls or with the onset of inclement weather 10. With a complete charged, the light can continue flash 120 hours. For constant light model will continue bright for 84 hours. 11. Waterproof rating: ip68 12. Life time(with capacitor): more than 10 years life time(with battery): more than 3 years 13. Warranty period: 1 year 14. Compression resistance: >30tons 15. Heat resistance:- 40fªc to +80fªc Applications: -± wet roads Conventional reflective markers lose their visibility when the roads are wet. The solar road marker's active illumination remains brightly visible, unaffected by wet conditions -± foggy conditions High intensity led spotlights penetrate fog to help the driver to negotiate curves -± dark rural country roads Illumination from the solar road marker can eliminate the need for street lighting while maintaining safe driving conditions -±mountain roads Help show approaching sharp turns and blind curves at night-time. The markers can also be mounted on guard railing to provide even greater visibility on twisted mountain roads 1 pc / white box, 30pcs / carton, Carton size: 475 x 423 x 317 mm, N.W./g.W.: 17 kg / 18.5 kg

Supplier: Signal lamps, push button switches and control stations, high-voltage electrical lighting apparatus
Buyer: Signal lamps, push button switches and control stations, auto-parts, energy saving lamp, lighting apparatus, high-voltage electrical

Supplier: Traffic signal lights, traffic signal controllers and street lights